Cited by 404Thermal and Kinetic AnalysisPolymer Science and PVCPolymer crystallization and properties

The DOI matches its Crossref record; 18 of the 18 references it cites were found in a registry or an index.

Thermal degradation of segmented polyurethanes

Open access

Petrović, Zoran S., Zavargo, Zoltan, Flyn, Joseph H., Macknight, William J.·1994·Journal of Applied Polymer Science

DOI 10.1002/app.1994.070510615

Open this paper in CoChat — free account Open PDF

Abstract

Abstract Thermal degradation of polyurethane samples was studied by a thermogravimetric method. The effect of soft‐segment length and soft‐segment concentration on activation energy of the degradation process was measured. Three methods of calculation gave activation energies at different stages of the very complex weight loss process. It was shown that at initial stages of the weight loss the process was dominated by hard‐segment degradation. Activation energy of the whole process calculated by the Ozawa–Flynn method did not offer clear insight into the structure–stability relationship of polyurethanes. The second method showed that activation energy of the initial stage of degradation increased with decrease in hard‐segment length. The Flynn method of calculating activation energy produced fairly constant activation energy of the first 40% degradation, at around 150 kJ/mol, for polymers in the C series. Generally, calculation of kinetic parameters of a complex degradation process as in polyurethanes gives results that are not easy to interpret. It has been shown qualitatively that polymers with higher soft‐segment concentration display lower initial weight loss and higher onset temperatures of degradation. © 1994 John Wiley & Sons, Inc.

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

Integrity signals

Registry

Crossref · 10.1002/app.1994.070510615

Cites

18 of 18 references verified0 citation errors · 0 not checkable

Statistics

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

A New Method of Analyzing Thermogravimetric Data
Ozawa, T. (1965) · Bulletin of the Chemical Society of Japan · doi:10.1246/bcsj.38.1881 · Cited by 6,996
A quick, direct method for the determination of activation energy from thermogravimetric data
Flynn, J. H., & Wall, L. A. (1966) · Journal of Polymer Science Part B Polymer Letters · doi:10.1002/pol.1966.110040504 · Cited by 3,271
Polyurethane elastomers
Petrovìć, Z. S., & Ferguson, J. W. (1991) · Progress in Polymer Science · doi:10.1016/0079-6700(91)90011-9 · Cited by 911
Reliability of methods for determination of kinetic parameters from thermogravimetry and DSC measurements
Petrovìć, Z. S., & Zavargo, Z. Z. (1986) · Journal of Applied Polymer Science · doi:10.1002/app.1986.070320406 · Cited by 99
Self-citation
The Reactions of Isocyanates and Isocyanate Derivatives at Elevated Temperatures
Saunders, J. H. (1959) · Rubber Chemistry and Technology · doi:10.5254/1.3542399 · Cited by 99
Mechanism of thermal degradation of polyurethanes investigated by direct pyrolysis in the mass spectrometer
Ballistreri, A., Foti, S., Maravigna, P., Montaudo, G., & Scamporrino, E. (1980) · Journal of Polymer Science Polymer Chemistry Edition · doi:10.1002/pol.1980.170180628 · Cited by 95
Comparative study of various methods for thermogravimetric analysis of polystyrene degradation
Nishizaki, H., Yoshida, K.-I., & Wang, J. H. (1980) · Journal of Applied Polymer Science · doi:10.1002/app.1980.070251218 · Cited by 92
Thermal stability of segmented polyurethanes
Ferguson, J. W., & Petrovìć, Z. S. (1976) · European Polymer Journal · doi:10.1016/0014-3057(76)90050-1 · Cited by 89
Mechanism of thermal degradation of polyurethane based on MDI and propoxylated trimethylol propane
Gaboriaud, F., & Vantelon, J. P. (1982) · Journal of Polymer Science Polymer Chemistry Edition · doi:10.1002/pol.1982.170200809 · Cited by 83
Initial kinetic parameters from thermogravimetric rate and conversion data
Flynn, J. H., & Wall, L. A. (1967) · Journal of Polymer Science Part B Polymer Letters · doi:10.1002/pol.1967.110050211 · Cited by 74

Show all 18 references

Research works printed but not linked: 8

Stepanyan S. A., 1972, Vysokomol. Soyed. Ser. B, 14, 246
Belyakov V. K., 1971, Vysokomol. Soyed. Ser. A, 13, 1585
Dyer E., 1972, J. Polym. Sci., 8, 1499
Vieweg R., 1966, Kunstoff‐Handbuch, Band VII, Polyurethane, 37
Z.Petrović PhD Thesis University of Strathclyde Glasgow 1974.
Blymenfel'd A. B., 1967, Vysokomol. Soyed., 9, 1587
Ferguson Z. Petrović and J., 1978, Hemijska Indust., 9, 610
Flynn J. H., 1978, Thermal Methods in Polymer Analysis, 163

Sorted by citations

Items 301–400 of 401

A new cyclic initiator system for the synthesis of novel star-shaped polyether-polyols (PEPOs) for fabrication of rigid cross-linked polyurethanes
Grobelny, Z., Golba, S., & Jurek-Suliga, J. (2018) · Iranian Polymer Journal · doi:10.1007/s13726-018-0653-2 · Cited by 8
The effect of long and short term elevated temperatures on the behaviour of lap glued joints of load-bearing spruce elements
Vaněrek, J., Bálková, R., Šmak, M., Běťák, A., & Vejpustek, Z. (2023) · International Journal of Adhesion and Adhesives · doi:10.1016/j.ijadhadh.2023.103575 · Cited by 7
The influence of bentonite and montmorillonite addition on thermal decomposition of novel polyurethane/organoclay nanocomposites
Pavličević, J., Špírková, M., Bera, O. J., Jovičić, M. C., Szécsényi, K. M., & Budìnski‐Simendìć, J. (2013) · Macedonian Journal of Chemistry and Chemical Engineering · doi:10.20450/mjcce.2013.442 · Cited by 7
HUVEC biocompatibility and platelet activation of segmented polyurethanes prepared with either glutathione or its amino acids as chain extenders
Perales-Alcacio, J. L. A., Tapia, J. S.-O., Mojica-Cardoso, C., Vargas‐Coronado, R. F., Chan‐Chan, L. H., Headen, D. M., Garcı́a, A. J., Cervantes‐Uc, J. M., & Cauich-Rodríguez, J. V. (2013) · Journal of Biomaterials Science Polymer Edition · doi:10.1080/09205063.2013.782804 · Cited by 7
Synthesis and characterization of polyurethane urea based on fluorine‐containing bisphenoxydiamine
Qin, X., Fang, F., Yang, X., Wang, X., & Zheng, Z. (2006) · Journal of Applied Polymer Science · doi:10.1002/app.24138 · Cited by 7
Synthesis and thermomechanical properties of allyl‐functionalized polycaprolactone urethane‐co‐2‐hydroxylethyl methacrylate networks
Shen, H., Quintard, G., Chen, J., & Taha, M. (2014) · Journal of Applied Polymer Science · doi:10.1002/app.41295 · Cited by 7
The thermal degradation of aqueous polyurethanes with catalysts of different selectivity
Cakić, S. M., Nikolić, G. S., Lacnjevac, C. M., Gligorić, M., & Rajković, M. (2007) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2007.07.004 · Cited by 7
Rigid polyurethane foams modified with borate and oxamide groups – Preparation and properties
Zarzyka, I., Pacześniak, T., & Frącz, W. (2020) · Journal of Cellular Plastics · doi:10.1177/0021955x20943093 · Cited by 6
SYNTHESIS OF SHAPE MEMORY POLYURETHANE/NANOCLAY COMPOSITES: CHEMICAL STRUCTURE AND INTERACTIONS BETWEEN POLYMER AND NANOCLAY PARTICLES
حقایق, م. س., میرمحمدصادقی, گ., & شمایلی, ب. (2012) · DOAJ (DOAJ: Directory of Open Access Journals) · doi:10.22063/jipst.2012.545 · Cited by 6
Thermal Decoating of Aerospace Aluminum Alloys for Aircraft Recycling
Muñiz-Lerma, J. A., Jung, I., & Brochu, M. (2016) · Metallurgical and Materials Transactions B · doi:10.1007/s11663-016-0629-6 · Cited by 6
Impact of Polymerization Protocol on Structure-Property Relationships of Entirely Lipid-Derived Poly(ester urethane)s
Shetranjiwalla, S., Li, S., Bouzidi, L., & Narine, S. S. (2017) · JOURNAL OF RENEWABLE MATERIALS · doi:10.7569/jrm.2017.634102 · Cited by 6
Thermogravimetric and qualitative analysis of thermal decomposition characteristics of polyurethane foams based on polyols with carbamide or oxamide and borate groups
Zarzyka, I., & Majda, D. (2017) · Polymer International · doi:10.1002/pi.5433 · Cited by 6
EFFECTS OF NANOCLAY CONTENTS ON THE PROPERTIES OF WATER-BASED COATING
Uyup, M. K. A., Yusoh, A. S., Tumirah, K., Hamdan, H., & Lee, S. (2019) · JOURNAL OF TROPICAL FOREST SCIENCE · doi:10.26525/jtfs2019.31.3.353 · Cited by 6
Poly(amidoamine) dendrimer-grafted carbon nanotubes as a hybrid multifunctional curing agent for epoxy-modified polyurethane
Izadi, M., Mardani, H., Roghani‐Mamaqani, H., & Salami‐Kalajahi, M. (2021) · Carbon letters · doi:10.1007/s42823-021-00242-5 · Cited by 6
Investigation on the failure behavior and compressive performance of rigid polyurethane foam treated under aerobic/anaerobic high temperature random vibration
He, Y., Qiu, D., & Yu, Z. (2021) · Polymer Testing · doi:10.1016/j.polymertesting.2021.107465 · Cited by 6
Influence of prepolymer reaction time in the fabrication of palm kernel oil polyol based shape memory polyurethane
Saad, N. M., Salleh, N. M., Abdullah, T. K., & Zubir, S. A. (2021) · Journal of Applied Polymer Science · doi:10.1002/app.52109 · Cited by 6
Effect of Compactabilization of Polymer on the Properties of Polyurethane-Palm Fiber Composites
Yaakob, Z., Min, A. M., Hilmi, M. M., Zaman, H. M. D. K., & Kamarudin, S. K. K. (2009) · Journal of Polymer Engineering · doi:10.1515/polyeng.2009.29.8-9.503 · Cited by 6
Block copolymer of polyurethanes with poly(m-phenylene isophthalamide)
Lin, M.-F., Wang, H., Chuang, F., Shu, Y., & Tsen, W. (1996) · Journal of Polymer Research · doi:10.1007/bf01492901 · Cited by 6
Viscoelastic Foams with Enhanced Fire Resistance Using Additive and Reactive Flame Retardants
Węgrzyk, G., Grzęda, D., Leszczyńska, M., Bryśkiewicz, A., Bulanda, K., Oleksy, M., & Ryszkowska, J. (2025) · Polymers · doi:10.3390/polym17182459 · Cited by 5
Sustained-release of essential oils by polyvinyl alcohol-based nanofibers
Hu, X., Huo, Z., Yan, J., He, A., Wang, L., Ha, E., Wang, S., & Yang, W. (2024) · Textile Research Journal · doi:10.1177/00405175241247340 · Cited by 5
Suitability of aromatic polyurethanes for use in nuclear applications
Labouriau, A., Stockdale, J. R., Adhikari, S., Pacheco, A. H., Legett, S. A., Davis, J., Geller, D., & Torres, X. M. (2024) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2024.110920 · Cited by 5
Robust charring construction of thermoplastic polyurethane: Cyclotriphosphazene structure bearing alkynyl and its impacts on thermal degradation, burning behavior and toughness
Hao, Y., Yang, Y., Chen, W., Li, Z., Yuan, M., Huang, G., & Zheng, D. (2025) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2025.111279 · Cited by 5
Insight into performance and lifetime of ecofriendly pollution barriers in landfill for emergency: A thermogravimetric analysis for novel polymer materials
Zhang, J., Jiao, K., Li, J. Z., Sun, P., & Chen, S. (2024) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2024.177072 · Cited by 5
The Effect of Molecular Weight of Polyethylene Glycol and Nanoclay Percentages on the Rheological Behavior of Dispersing Anionic Polyurethane Nanocomposites
Jola, B. G., Hadavand, B. S., Didehban, K., & Mirshokraie, A. (2017) · Journal of Inorganic and Organometallic Polymers and Materials · doi:10.1007/s10904-017-0724-4 · Cited by 5
Preparation and physicochemical characterization of drug loaded in castor oil-based polyurethane
Fortes, A. C., Bezzon, V. D. N., de Araújo, G. L. B., Paiva-Santos, C. O., & Ferraz, H. G. (2019) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-019-08607-9 · Cited by 5
Effect of poly(amidoamine) dendrimer-grafted silica nanoparticles and different chain extenders on thermal properties of epoxy-modified polyurethane composites
Izadi, M., Mardani, H., Roghani‐Mamaqani, H., & Salami‐Kalajahi, M. (2021) · Bulletin of Materials Science · doi:10.1007/s12034-021-02490-7 · Cited by 5
The Aging Behavior of Polyurethane-based Ureteral Catheters
Onaş, A. M., Bîru, E. I., Petca, A. T., & Petca, R. (2022) · Materiale Plastice · doi:10.37358/mp.21.4.5532 · Cited by 5
Polyurethane/poly (Ionic Liquids) Cellulosic Composites and their Evaluation for Separation of CO2 from Natural Gas
Bernard, F. L., dos Santos, L. M., Cobalchina, F. W., Schwab, M. B., & Einloft, S. (2019) · Materials Research · doi:10.1590/1980-5373-mr-2018-0827 · Cited by 5
Preparation and characterization of high-strength elastomers with high poly(trifluoropropylmethyl)siloxane content into polyurethane urea
Shi, Z. (2012) · Journal of Polymer Research · doi:10.1007/s10965-012-0057-5 · Cited by 5
Thermal Stability of Aqueous Polyurethanes Depending on the Applied Catalysts
Cakić, S. M., Nikolić, G. S., Lacnjevac, C. M., Gligorić, M., Stamenković, J., Rajković, M., & Barać, M. (2006) · Sensors · doi:10.3390/s6111697 · Cited by 5
Polyurethane /Ionic Silica Xerogel Composites for CO2 Capture
dos Santos, L. M., Bernard, F. L., Pinto, I. S., Scholer, H., Dias, G., Prado, M. A., & Einloft, S. (2019) · Materials Research · doi:10.1590/1980-5373-mr-2019-0022 · Cited by 5
The impact of polyurethane adhesives on the recyclability of polyethylene-based laminated films
Ebrahimi, A., Pardal, F., Jarnoux, M., Defoin, M., Loiola, L. M. D., Ragaert, K., & Fiório, R. (2025) · Polymer Testing · doi:10.1016/j.polymertesting.2025.109010 · Cited by 4
Thermal decomposition and kinetics of rigid polyurethane foams derived from sugarcane bagasse
Yan, Y., Xu, J., Pang, H., Zhang, R., & Liao, B. (2009) · Journal of Wuhan University of Technology-Mater Sci Ed · doi:10.1007/s11595-009-5776-z · Cited by 4
Defatted Soy Flour Substitution in Phenol Formaldehyde and Methylene Diphenyl Diisocyanate Wood Adhesives and their Curing Kinetic Behavior
Hand, W. G. (2018) · Cited by 4
From betulin potentially bioproduced from plastics wastes to sustainable and high-performance cycloaliphatic polyurethanes: Towards a Biotech-Chem approach
Mouren, A., Qiu, S., Pollet, É., Blank, L. M., & Avérous, L. (2025) · European Polymer Journal · doi:10.1016/j.eurpolymj.2025.113909 · Cited by 3
Synergistic enzyme/acid-degradable PCL-based polyurethanes with enhanced biocompatibility and shape memory properties
Wu, M., Han, Y., You, H., Yang, Z., Xu, W., Yan, S., Wu, F., Fan, T., & Du, J. (2025) · European Polymer Journal · doi:10.1016/j.eurpolymj.2025.114313 · Cited by 3
Thermally curable polyurethanes with main-chain benzoxazine and pendant carboxylic acid groups and their use as electrically insulating coatings
Moeini, H., Pourmahdian, S., & Yeganeh, H. (2023) · Polymer Bulletin · doi:10.1007/s00289-023-04890-7 · Cited by 3
Synthesis, Characterization of Erythromycin Propionate Core-Based Star Poly(ether urethane)s and Their Antibacterial Properties
Filip, D., Macocinschi, D., Tuchiluş, C., Zaltariov, M., & Varganici, C. (2021) · Macromolecular Research · doi:10.1007/s13233-021-9069-5 · Cited by 3
Thermal and mechanical properties of palm oil-based polyurethane acrylate/clay nanocomposites prepared by in-situ intercalative method and electron beam radiation
Salih, A. M., Ahmad, M. B., Ibrahim, N. A., Dahlan, K. Z. H. M., Tajau, R., Mahmood, M. H., & Yunus, W. M. Z. W. (2014) · AIP conference proceedings · doi:10.1063/1.4866116 · Cited by 3
PTMG-Modified MWCNT/PTMG-based polyurethane nanocomposites: Strong interaction and homogeneous dispersion
Behniafar, H., & Yazdi, M. (2016) · Polymer Science Series B · doi:10.1134/s1560090416060038 · Cited by 3
Characterization of Poly(Methyl Methacrylate) and Thermoplastic Polyurethane-Carbon Nanofiber Composites Produced by Chaotic Mixing
Jiménez, G. (2007) · OhioLink ETD Center (Ohio Library and Information Network) · Cited by 3
Thermal stability of isocyanate as particleboard’s adhesive investigated by TGA (Thermogravimetric Analysis)
Nuryawan, A., & Alamsyah, E. M. (2019) · IOP Conference Series Earth and Environmental Science · doi:10.1088/1755-1315/374/1/012004 · Cited by 3
Characterization of Poly(ether)urethanes - High Resolution Thermogravimetric Analysis
Hiltz, J. A., & Keough, I. A. (2004) · doi:10.13140/2.1.4631.3767 · Cited by 3
Mechanochemistry–Reactive Extrusion: A Solvent-Free, Scalable Strategy for Multifunctional Thermoplastic Polyurethane Composites
Lee, S., Kim, H., Lee, S., Hong, S. W., Bang, J., Kim, H., & Park, J. H. (2025) · ACS Applied Polymer Materials · doi:10.1021/acsapm.5c02173 · Cited by 2
Interface-Mediated Nanophase Network Formation of Poly(Urethane-Urea) in Aligned Carbon Nanotube Nanocomposites: Implications for Advanced Structural Composites
Gair, J. L., Cole, D. P., Lambeth, R. H., Lidston, D. L., Hsieh, A. J., Kooi, S. E., Bruck, H. A., Hall, A. J., Bundy, M. L., & Wardle, B. L. (2025) · ACS Applied Nano Materials · doi:10.1021/acsanm.5c02052 · Cited by 2
Tough, self-healing and recyclable polyurea elastomer with dual dynamic crosslinked networks for sustainable flexible strain sensors
Guo, Y., Tang, J., Yang, Z., Mou, X., Lai, X., Zeng, X., & Li, H. (2026) · Materials Horizons · doi:10.1039/d6mh00936k · Cited by 2
Synthesis and Characterization of Interpenetrating Biopolyester Networks Using Naturally Available Renewable Resources
Stella, T. J., Sathiyalekshmi, K., & Raj, G. A. G. (2012) · International Journal of Polymeric Materials · doi:10.1080/00914037.2011.593056 · Cited by 2
Phase Transition and Degradation Characteristics of Poly(urethane-Siloxane) Copolymers
Yeh, J., & Shu, Y. (2007) · Polymers and Polymer Composites · doi:10.1177/096739110701500209 · Cited by 2
Enhanced synergistic effect by pairing novel inherent flame-retardant polyurethane foams with nanolayers of expandable graphite for their applications in automobile industry
de Souza, F. M., Arnce, M., & Gupta, R. K. (2022) · Elsevier eBooks · doi:10.1016/b978-0-323-90524-4.00004-9 · Cited by 2
The Impact of Hybrid Flame Retardant Compositions on the Performance of Foamed Flexible Polyurethane/Ground Tire Rubber Composites
Kosmela, P., Olszewski, A., Barczewski, M., Piasecki, A., & Hejna, A. (2024) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-024-09362-1 · Cited by 2
Revolutionizing self-healing materials: Complex micro-containers (CMC) for delivery of compartmentalized reactive agents
Stamer, K. S., Baltaeva, M., Orlov, M., Wagle, V. B., & Yami, A. (2025) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2025.137213 · Cited by 2
Structure–property relationships and nanofiller‐induced hydro‐anti‐plasticization in polyhydroxyurethane/ POSS hybrid composites
Łukaszewska, I., Raftopoulos, K. N., Bukowczan, A., & Pielichowski, K. (2024) · Journal of Applied Polymer Science · doi:10.1002/app.56349 · Cited by 2
Calix[4]arenes Used as a New Type of Chain Extender in the Preparation of Polyurethanes
Zheng, Q., Gong, S., Dong, H., & Chen, Y. (2007) · Australian Journal of Chemistry · doi:10.1071/ch06387 · Cited by 2
Thermo-oxidative stability of waterborne polyurethanes with catalysts of different selectivity evaluated by non-isothermal thermogravimetry
Cakić, S. M., Nikolić, G. S., & Stamenković, J. (2007) · Journal of the Serbian Chemical Society · doi:10.2298/jsc0707723c · Cited by 2
Synthesis and application of polyurethane basic organic-inorganic hybrid materials as highly hydrophobic coatings
Yang, C., Pan, Y.-W., Guo, J.-J., Young, T., Chiu, W., & Hsieh, K. H. (2016) · Journal of Polymer Research · doi:10.1007/s10965-016-0919-3 · Cited by 2
Study on Thermal Stability and Aging Resistance of High Hardness Polyurethane Elastomer via Thermal Analysis
Ma, R. Y., & Yi, Y. (2013) · Advanced materials research · doi:10.4028/www.scientific.net/amr.849.261 · Cited by 2
Formulation and optimization of thermoplastic polyamide elastomer properties by mixture response surface methodology
Twu, Y.-K., Chen, C., & Shieh, C. (2002) · Journal of Applied Polymer Science · doi:10.1002/app.10521 · Cited by 2
Investigation of the mechanical properties of lavender-reinforced heat-activated polymethyl methacrylate denture base resin
Anitha, K. V., & Krishnan, R. (2024) · Journal of Prosthetic Dentistry · doi:10.1016/j.prosdent.2024.11.005 · Cited by 1
An investigation from raw components to composite: 3D printed Voronoi lattice core structured sandwich composite with woven glass fiber-epoxy outer layer
Gür, Y., Benlikaya, R., & Çelik, S. (2025) · Engineering Research Express · doi:10.1088/2631-8695/ada729 · Cited by 1
Mechanical recycling of TPU foams via microcellular injection molding - effects on hard segments crystallization, cell structure, and mechanical properties
Maciariello, F., Lucchetta, G., & Sorgato, M. (2026) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-026-18031-7 · Cited by 1
Recyclability of thermoplastic polyurethane under repeated mechanical reprocessing: degradation mechanisms and volatile emissions
Poláchová, A., Novák, M., Císař, J., Masař, M., & Sedlařík, V. (2026) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2026.112285 · Cited by 1
Mechanically tunable, damage-tolerant, and biodegradable poly(urethane-amide)s from post-consumer plastics via segmental composition regulation
Cheng, K., He, M., Hsu, Y., & Uyama, H. (2026) · Chemical Engineering Journal · doi:10.1016/j.cej.2026.178482 · Cited by 1
Controlled Crosslinking of TPU: A Case Study
Bafti, R. R., Grondz, J., Shin, D. J., Souza, L., & Manas‐Zloczower, I. (2026) · Macromolecular Materials and Engineering · doi:10.1002/mame.70293 · Cited by 1
Investigation of the Hydrolytic Stability of Polyurethane Applied to Vehicle Suspension Components
Rigotti, M., Bischoff, E., & Simon, D. A. (2020) · Journal of Research Updates in Polymer Science · doi:10.6000/1929-5995.2019.08.08 · Cited by 1
Development of Polyurethane Elastomer-Based Bio-Composites Reinforced with Basaltic Pumice
Yurderi, M., Tayfun, Ü., & Bulut, A. (2024) · Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi · doi:10.21597/jist.1543279 · Cited by 1
Thermal analysis and aging monitoring of biosourced resins
Konaï, N., Karga, L. T., Pizzi, A., Ndiwé, B., Biyeme, F., Voufo, J., Tawé, L., Raïdandi, D., & Meva’a, L. (2022) · European Journal of Wood and Wood Products · doi:10.1007/s00107-022-01868-6 · Cited by 1
Preparação e caracterização de compósitos de poliuretanas elastoméricas rígidas obtidas a partir de fontes renováveis
Costa, A. P. O. (2007) · Americanae (AECID Library)
Manufacture of T g and T m shape memory polyurethane (SMPU) polymer fibers
Hu, J. (2013) · Elsevier eBooks · doi:10.1533/9780857098542.281
Thermal properties and crystalline structure of liquid crystalline poly(ethylene terephthalate‐co‐2(3)‐chloro‐1,4‐phenylene terephthalate)
Rhee, D. M., Ha, W. S., Youk, J. H., & Yoo, D. I. (2002) · Journal of Applied Polymer Science · doi:10.1002/app.10451
Thermal Properties of Fe-octacarboxyl Acid Phthalocyanine/Polyurethane Blends
Ti, Y., & Chen, D. (2014) · Journal of Macromolecular Science Part B · doi:10.1080/00222348.2014.943120
Modification chimique de Polyuréthanes Thermoplastiques : Etude des réactions chimiques menant à l'autoréticulation et de la microorganisation physique, pour le contrôle des propriétés.
Borsali, R., Bouteiller, L., & Eisenbach, C. D. (2005)
REPUBLIQUE ALGERIENNE DEMOCRATIQUE ET POPULAIRE MINISTERE DE L'ENSEIGNEMENT SUPERIEUR ET DE LA RECHERCHE SCIENTIFIQUE
Doctorale, É. (2012)
Determination of Fire Signatures by Thermogravimetric Analysis with Fourier Transform Infrared Detection
Wal, R. L. V., & Fujiyama‐Novak, J. H. (2010) · Journal of Applied Fire Science · doi:10.2190/af.20.2.a
Development of Self-assembled Amphiphilic Oligo-urethanes as Cardiovascular Drug Delivery Platforms
Rajora, M. A. (2015) · TSpace (University of Toronto)
Synthesis of Ultraviolet Curable Hyperbranched Polyurethane Acrylate and Properties of its Cured Films
Wei-ping, T. (2009) · Journal of Chemical Engineering of Chinese Universities
Aplicação de resina poliuretânica derivada do óleo de mamona em formas farmacêuticas gastrorretentivas de liberação controlada
Fortes, A. C. (2017) · Digital Library of Theses and Dissertations (Universidade de São Paulo) · doi:10.11606/t.9.2017.tde-13122017-171538
The influence of silica nanoparticles on thermal degradation and mechanical properties of nanocomposites based on aliphatic polyurethanes
Pavličević, J., Špírková, M., Bera, O. J., Jovičić, M. C., Kojić, D., Szécsényi, K. M., & Budìnski‐Simendìć, J. (2018) · Hemijska industrija · doi:10.2298/hemind170829014p
Flame-Retardant Polyurethanes
Ray, S. S., & Malkappa, K. (2019) · Springer series in materials science · doi:10.1007/978-3-030-35491-6_5
Polyurethanes
(2004) · Plastics engineering · doi:10.1201/9781420030594.ch8
Effects of N-Octadecane as PCM on the Thermal and Mechanical Properties of Polyurethane Foams Utilizing Coconut-Based Polyols
Magdadaro, M. R. D., Capangpangan, R. Y., Lubguban, A. A.-O., & Alguno, A. C. (2022) · Advances in science and technology · doi:10.4028/p-2ih4l3
COMPORTAMENTO MECÂNICO E TÉRMICO DA POLIAMIDA 11, POLIURETANO E POLIETILENO EMPREGADOS EM MANGUEIRAS DE UMBILICAIS TERMOPLÁSTICOS ANTES E APÓS ENVELHECIMENTO UV E EM AMBIENTE SALINO
Menezes, K. C. M. (2023) · doi:10.17771/pucrio.acad.63338
Development of Non-metallic Structural Materials for Defence Systems
Srivastava, S., Yadav, J., Srivastava, J. N., Kole, A., & Namburi, E. P. (2024) · Indian Institute of Metals series · doi:10.1007/978-981-99-9795-4_5
Preparation and performance study of polyurethane/ kaolinite nanocomposite insulation materials
Dai, J., Tang, P., Wu, Z., & Chen, B. (2024) · Journal of Physics Conference Series · doi:10.1088/1742-6596/2783/1/012006
Facile passivation method using liquid plaster for achieving high-performance indium–gallium–zinc oxide thin-film transistors
Kim, Y. W., Kim, M. S., Ahn, J. H., Lee, S., Hwang, Y.-H., & Kim, H. J. (2025) · Surfaces and Interfaces · doi:10.1016/j.surfin.2025.106810
Structure-property relationships and microstructural origins of elasticity in Poly(ethylene brassylate)-block-poly(tetramethylene oxide) multiblock copolymers and their fibers
You, M., Ma, J., Zhang, X., Tu, Y., & Yang, X. (2025) · Polymer · doi:10.1016/j.polymer.2025.129354
Sustainable composites based on post-consumer soybean oil and sugarcane bagasse: morphology, mechanical properties, and thermal degradation mechanism
Luna, C. B. B., Barreto, J. V. M., Bezerra, E. B., Soares, N. P., Silva, I. D. D. S., Araújo, A. M., Araújo, E. M., & Wellen, R. M. R. (2025) · Polymer Bulletin · doi:10.1007/s00289-025-06153-z
Effect of HNT Content and 3D Printing Parameters on Mechanical and Thermal Properties of PU/HNT Nanocomposites
Nugroho, W. T., Dong, Y., & Pramanik, A. (2026) · Engineering materials · doi:10.1007/978-981-95-0541-8_9
Nano-structuration sous contraintes de polyuréthanes segmentés thermoplastiques
Mourier, E. (2009) · theses.fr (ABES) · doi:10.70675/2884e8fcz9d57z492cza816z32b1176cc9ee
Development of functional biopolymers with controlled architecture
Shen, H. (2013) · theses.fr (ABES) · doi:10.70675/0de8f946zf4e3z4640z977czf927caf18159
Développement d'une élastomère thermoplastique constitutif d'assemblages composites hates performances
Gaston, A. (2016) · theses.fr (ABES) · doi:10.70675/bf875c90z8d23z46cez9ae3z8f969165f0a0
Développement de réseaux polyuréthane à base d’oligocarbonates dihydroxytéléchéliques partiellement biosourcés
Chrait, I. B. (2018) · doi:10.70675/d2190d8azf10fz4b04zb6edz15e6f1488a4f
Mechanochemical Conversion of Flexible PU Foam into Functional Additives for Circularity
Clifton, C., & Nulwala, H. (2026) · REMADE Circular Economy Technology Summit & Conference · doi:10.65569/hbrj8940
Sustainable polymers and additives from waste plastics using a hybrid “chem-biotech” approach
Mouren, A. (2023) · theses.fr (ABES) · doi:10.70675/39f705a7zbf24z4d60za254z29f3ec2151cb
Characterization of morphological, mechanical, and thermal response of highly-filled thermoplastic polyurethane hybrid nanocomposites reinforced with graphene and single-walled carbon nanotube
Pain, P., & Datta, D. (2026) · Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications · doi:10.1177/14644207261453466
Thermoplastic Polyurethanes with Controlled Microphase Separation and Properties Mediated by Structures of Chain Extenders and Hard Segment PrepolymersPreprint
Zhang, Y., Liu, B. C., Cao, H., Wang, X., Chen, D., Wang, G., Ma, Y., & Yang, W. (2026) · SSRN Electronic Journal · doi:10.2139/ssrn.6899741
Polyurethane nanocomposites with 2D layered hectorite clay and polysaccharide biopolymer as hybrid nanofillers
Sachdev, D., Ansari, G., Kim, J. Y., & Verma, G. (2026) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2026.110372
Влияние тетрабутилааммониевых солей полигидроксозамещенных производных клозо-додекаборатного аниона на термоокислительное старение полиуретановых эластомеров
Senichev, V. Y., Стрельников, В. Н., Кубасов, А. С., Popovich, S. Z., Simonenko, N. P., Перепада, М. В., Ерышканов, С. В., Макарова, М. А., Погорельцев, Э. В., Жижин, К. Ю., et al. (2026) · Perm Scientific Center Journal · doi:10.7242/2658-705x/2026.2.9
Substituent-regulated spiropyran/polyurethane fibers with rapid photochromic response and high durability
Li, J., Liu, K., Feng, Y., Zong, H., Zeng, J., Liao, X., Yang, M., Wang, Z., Chen, Z., Yi, C., et al. (2026) · Chemical Engineering Journal · doi:10.1016/j.cej.2026.180591
Thermal degradation, pyrolysis kinetics, and thermodynamic analysis of recycled polypropylene/date palm fiber composites
Alwaan, I. M., & Moslam, I. I. (2026) · Reaction Kinetics Mechanisms and Catalysis · doi:10.1007/s11144-026-03268-w
Thermal oxidative decomposition behavior and kinetics of wood fiber–graphite carbon powder composite foam
Xie, Q., Li, H., Wei, T., Zhang, E., Liu, L., Wang, S., Li, H., Han, T., 孔二华, Feng, X., et al. (2026) · Reaction Kinetics Mechanisms and Catalysis · doi:10.1007/s11144-026-03265-z

Authors: Petrović, Z. S., Zavargo, Z., Flyn, J. H., & Macknight, W. J.
Affiliations: University of Novi Sad (RS)
National Institute of Standards and Technology (US)
University of Massachusetts Amherst (US)
Venue: Journal of Applied Polymer Science
Publisher: Wiley
Published: 1994-02-07
Volume: 51
Issue: 6
Pages: 1087-1095
ISSN: 0021-8995 (ISSN-L)
1097-4628
DOI: 10.1002/app.1994.070510615
OpenAlex: W1973937445
Cited by: 404
References: 18
Citations by year: 2026: 14 · 2025: 14 · 2024: 24 · 2023: 17 · 2022: 19 · 2021: 12 · 2020: 12 · 2019: 22 · 2018: 21 · 2017: 19 · 2016: 25 · 2015: 19 · 2014: 21 · 2013: 17 · 2012: 16
FWCI: 2.35
Type: journal article
Language: en
Open access: green
works.bepress.com
Licence: onlinelibrary.wiley.com/termsAndConditions#vor (vor, 3318 d)
Locations: Journal of Applied Polymer Science (publishedVersion)
ScholarWorks@UMassAmherst (University of Massachusetts Amherst) (submittedVersion)
Topics: Physical Sciences › Materials Science › Materials Chemistry › Thermal and Kinetic Analysis
Physical Sciences › Materials Science › Polymers and Plastics › Polymer Science and PVC
Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
Keywords: segmented polyurethanes, thermal degradation, activation energy, soft segment length, degradation kinetics, structure-stability relationship, weight loss

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Thermal degradation of segmented polyurethanes

Abstract

Overview

Integrity signals

Verification

Claims the paper makes

Claims other papers make about this one

Self-check

Citations

Cites

Cited by

Related

Metadata

Record

About these checks