Thermomechanical film properties and aging of blends of poly(lactic acid) and malonate oligomers
The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Abstract
Malonate oligomers were synthesized as plasticizers for poly(lactic acid) (PLA). Esterification reactions were performed between diethyl bishydroxymethyl malonate (DBM) and either adipoyl dichloride or succinyl dichloride. Two molar masses were obtained within each series. Blending was carried out with PLA and the four oligomers as well as the monomeric unit from the syntheses (DBM). Dynamic mechanical analysis and differential scanning calorimetry were used to investigate the viscoelastic mechanical and thermal film properties of the blends. All the investigated plasticizers reduced the glass‐transition temperature of PLA, and the plasticization effect was better for the plasticizers of low molar mass. However, the amorphous domains of PLA became saturated with plasticizer at a certain concentration, and phase separation occurred. A higher molar mass of the plasticizer caused this saturation to occur at lower plasticizer concentrations. Subsequently, the aging of the blends at the ambient temperature for 4 months induced phase separation in the blends containing DBM, whereas those with an oligomeric plasticizer were stable and remained compatible with PLA within the aging period. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 2140–2149, 2004
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Ljungberg, N., & Wesslén, B. (2003) · Polymer · doi:10.1016/j.polymer.2003.09.055 · Cited by 278
Self-citationAging of poly(lactide)/poly(ethylene glycol) blends. Part 1. Poly(lactide) with low stereoregularity
Hu, Y., Rogunova, M., Topolkaraev, V., Hiltner, A., & Baer, E. (2003) · Polymer · doi:10.1016/s0032-3861(03)00614-1 · Cited by 261
Hu, Y., Hu, Y. S., Topolkaraev, V., Hiltner, A., & Baer, E. (2003) · Polymer · doi:10.1016/s0032-3861(03)00615-3 · Cited by 258
Modification of poly(L‐lactides) by blending: mechanical and hydrolytic behavior
Hiljanen‐Vainio, M., Varpomaa, P., Seppälä, J., & Törmälä, P. (1996) · Macromolecular Chemistry and Physics · doi:10.1002/macp.1996.021970427 · Cited by 249
Hu, Y., Hu, Y. S., Topolkaraev, V., Hiltner, A., & Baer, E. (2003) · Polymer · doi:10.1016/s0032-3861(03)00609-8 · Cited by 238
Yang, J.-M., Chen, H.-L., You, J.-W., & Hwang, J. C. (1997) · Polymer Journal · doi:10.1295/polymj.29.657 · Cited by 163
Focarete, M. L., Scandola, M., Dobrzynski, P., & Kowalczuk, M. (2002) · Macromolecules · doi:10.1021/ma020940z · Cited by 119
Maglio, G., Migliozzi, A., & Palumbo, R. (2003) · Polymer · doi:10.1016/s0032-3861(02)00764-4 · Cited by 111
Cited by
Poly(lactic acid) modifications
Rasal, R. M., Janorkar, A. V., & Hirt, D. E. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.12.003 · Cited by 2,204
Poly(lactic acid) crystallization
Saeidlou, S., Huneault, M. A., Li, H., & Park, C. B. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.07.005 · Cited by 1,606
Research progress in toughening modification of poly(lactic acid)
Liu, H., & Zhang, J. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22283 · Cited by 767
Petro‐based and bio‐based plasticizers: Chemical structures to plasticizing properties
Bocqué, M., Voirin, C., Lapinte, V., Caillol, S., & Robin, J. (2016) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.27917 · Cited by 469
Preparation and Properties of Plasticized Poly(lactic acid) Films
Ljungberg, N., & Wesslén, B. (2005) · Biomacromolecules · doi:10.1021/bm050098f · Cited by 331
Self-citation
Metadata
- Authors
- Ljungberg, N., & Wesslén, B.
- Venue
- Journal of Applied Polymer Science
- Publisher
- Wiley
- Published
- 2004-10
- Volume
- 94
- Issue
- 5
- Pages
- 2140-2149
- ISSN
- 0021-8995 (ISSN-L)
- 1097-4628
- OpenAlex
- W1998875749
- Cited by
- 43
- References
- 8
- FWCI
- 0.36
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.