The DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index.
The effect of morphology and chemical characteristics of cellulose reinforcements on the crystallinity of polylactic acid
Open accessAbstract
The aim of this work has been to study the crystallization behavior of composites based on polylactic acid (PLA) and three different types of cellulose reinforcements, viz., microcrystalline cellulose (MCC), cellulose fibers (CFs), and wood flour (WF). The primary interest was to determine how the size, chemical composition, and the surface topography of cellulosic materials affect the crystallization of PLA. The studied composite materials were compounded using a twin‐screw extruder and injection‐molded to test samples. The content of cellulose reinforcements were 25% by weight. The MCC and WF were shown to have a better nucleating ability than CFs based on differential scanning calorimetry and optical microscopy studies. It is difficult to visualize that transcrystallization will occur during melting process and this process is influenced by the morphological and chemical characteristics of the reinforcement. Bulk crystallization seems to be mainly dependent on the processing temperature. The cold crystallization process was shown to improve the thermal stability and storage modulus of the composites. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 300–310, 2006
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Natural fibres as reinforcement in polylactic acid (PLA) composites
Oksman, K., Skrifvars, M., & Selin, J.-F. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00103-9 · Cited by 1,565
Self-citationThermal characterization of polymeric materials
Turi, E. A. (1981) · Cited by 1,263
Review: Current international research into cellulosic fibres and composites
Eichhorn, S. J., Baillie, C. A., Zafeiropoulos, N., Mwaikambo, L. Y., Ansell, M. P., Dufresne, A., Entwistle, K. M., Herrera-Franco, P. J., Escamilla, G. C., Groom, L., et al. (2001) · Journal of Materials Science · doi:10.1023/a:1017512029696 · Cited by 943
Properties and modification methods for vegetable fibers for natural fiber composites
Bledzki, A. K., Reihmane, S., & Gassan, J. (1996) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19960222)59:8<1329::aid-app17>3.0.co;2-0 · Cited by 906
Mathew, A. P., Oksman, K., & Sain, M. (2005) · Journal of Applied Polymer Science · doi:10.1002/app.21779 · Cited by 851
Self-citationPlasticized starch/tunicin whiskers nanocomposites. 1. Structural analysis
Anglès, M. N., & Dufresne, A. (2000) · Macromolecules · doi:10.1021/ma0008701 · Cited by 667
Thermal characterization of polymeric materials
(1997) · Choice Reviews Online · doi:10.5860/choice.35-0290 · Cited by 657
Crystallization Behavior and Morphology of Biodegradable Polylactide/Layered Silicate Nanocomposite
Nam, J. Y., Sinha Ray, S., & Okamoto, M. (2003) · Macromolecules · doi:10.1021/ma034623j · Cited by 429
Crystallization kinetics of poly(l-lactic acid)
Vasanthakumari, R., & Pennings, A. J. (1983) · Polymer · doi:10.1016/0032-3861(83)90129-5 · Cited by 406
Morphology and mechanical properties of unidirectional sisal– epoxy composites
Oksman, K., Wallström, L., Berglund, L. A., & Filho, R. D. T. (2002) · Journal of Applied Polymer Science · doi:10.1002/app.10475 · Cited by 251
Self-citation
Cited by
Farah, S., Anderson, D. G., & Langer, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.012 · Cited by 3,443
Processing technologies for poly(lactic acid)
Lim, L.-T., Auras, R., & Rubino, M. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.05.004 · Cited by 2,766
Suryanegara, L., Nakagaito, A. N., & Yano, H. (2009) · Composites Science and Technology · doi:10.1016/j.compscitech.2009.02.022 · Cited by 617
Graupner, N., Herrmann, A. S., & Müssig, J. (2009) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2009.04.003 · Cited by 608
Pei, A., Zhou, Q., & Berglund, L. A. (2010) · Composites Science and Technology · doi:10.1016/j.compscitech.2010.01.018 · Cited by 524
Recent Advances in the Application of Natural Fiber Based Composites
Pandey, J. K., Ahn, S. H., Lee, C. S., Mohanty, A. K., & Misra, M. (2010) · Macromolecular Materials and Engineering · doi:10.1002/mame.201000095 · Cited by 436
Isolation and characterization of microcrystalline cellulose from oil palm biomass residue
Mohamad Haafiz, M. K., Eichhorn, S. J., Hassan, A., & Jawaid, M. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.01.035 · Cited by 434
Mechanical properties of PLA composites with man-made cellulose and abaca fibres
Bledzki, A. K., Jaszkiewicz, A., & Scherzer, D. (2009) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2009.01.002 · Cited by 400
Comparison of injection moulded, natural fibre-reinforced composites with PP and PLA as matrices
Mofokeng, J. P., Luyt, A. S., Tábi, T., & Kovács, J. (2012) · Journal of Thermoplastic Composite Materials · doi:10.1177/0892705711423291 · Cited by 391
Development and Application of Wood Flour-Filled Polylactic Acid Composite Filament for 3D Printing
Tao, Y., Wang, H., Li, Z., Li, P., & Shi, S. Q. (2017) · Materials · doi:10.3390/ma10040339 · Cited by 360
Sanchez-Garcia, M. D., Gimenez, E., & Lagaron, J. M. (2008) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2007.05.041 · Cited by 333
Tingaut, P., Zimmermann, T., & Lopez-Suevos, F. (2010) · Biomacromolecules · doi:10.1021/bm901186u · Cited by 323
Haafiz, M. K. M., Hassan, A., Zakaria, Z., & Inuwa, I. M. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.11.055 · Cited by 321
Nakagaito, A. N., Fujimura, A., Sakai, T., Hama, Y., & Yano, H. (2009) · Composites Science and Technology · doi:10.1016/j.compscitech.2009.03.004 · Cited by 280
Advantages and Disadvantages of Bioplastics Production from Starch and Lignocellulosic Components
Abe, M. M., Martins, J. R., Sanvezzo, P. B., Macedo, J. V., Branciforti, M. C., Halley, P., Botaro, V. R., & Brienzo, M. (2021) · Polymers · doi:10.3390/polym13152484 · Cited by 269
Improvement of mechanical performance of industrial hemp fibre reinforced polylactide biocomposites
Sawpan, M. A., Pickering, K. L., & Fernyhough, A. (2011) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.12.004 · Cited by 261
Ahmad, N. D., Kusmono, Wildan, M. W., & Herianto (2023) · Results in Engineering · doi:10.1016/j.rineng.2022.100842 · Cited by 103
CNT Induced β-Phase in Polylactide: Unique Crystallization, Biodegradation, and Biocompatibility
Singh, N. K., Singh, S. K., Dash, D., Gonugunta, P., Misra, M., & Maiti, P. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp4009042 · Cited by 68
Trivedi, A. K., & Gupta, M. K. (2024) · Scientific Reports · doi:10.1038/s41598-024-71619-5 · Cited by 49
Characterization of tanalith E treated wood flour filled polylactic acid composites
Dalu, M., Temiz, A., Altuntaş, E., Demirel, G. K., & Aslan, M. (2019) · Polymer Testing · doi:10.1016/j.polymertesting.2019.03.037 · Cited by 30
Metadata
- Authors
- Mathew, A. P., Oksman, K., & Sain, M.
- Venue
- Journal of Applied Polymer Science
- Publisher
- Wiley
- Published
- 2006-04-25
- Volume
- 101
- Issue
- 1
- Pages
- 300-310
- ISSN
- 0021-8995 (ISSN-L)
- 1097-4628
- OpenAlex
- W2085268570
- Cited by
- 363
- References
- 13
- FWCI
- 11.09
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.