The DOI matches its Crossref record.
Parametric optimization of intra‐ and inter‐layer strengths in parts produced by extrusion‐based additive manufacturing of poly(lactic acid)
Abstract
Parts produced by extrusion‐based additive manufacturing experience the disadvantage of consisting of many weld‐lines, which consequently downgrade their mechanical properties. This work aims at maximizing the strength of printed parts by considering and improving the intra‐ and inter‐layer cohesion between adjacent strands. Therefore, printed poly(lactic acid) specimens were characterized by means of a particular tensile test setup, and the inter‐layer cohesion of printed specimens was evaluated by means of the double cantilever beam test. A detailed parametric statistical evaluation, which included printing temperatures, layer thicknesses, and layer‐designs, was complemented by the material's viscosity data and the analysis of the specimens' fracture surfaces and cross‐sections. An optimal layer‐design was found to be a key parameter in the optimization of strength with regard to different loading directions. Additionally, the maximization of the cohesion leads to a tremendous improvement in the mechanical performance of the printed parts, resulting in strengths of roughly 90% of those of compression‐molded parts. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017, 134, 45401.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Khan, N., & Riccio, A. (2024) · Progress in Aerospace Sciences · doi:10.1016/j.paerosci.2024.101021 · Cited by 486
A review on voids of 3D printed parts by fused filament fabrication
Tao, Y., Kong, F., Li, Z., Zhang, J., Zhao, X., Yin, Q., Xing, D., & Li, P. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.10.108 · Cited by 443
Wu, Y., Fang, J., Wu, C., Li, C., Sun, G., & Li, Q. (2023) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2023.108102 · Cited by 440
Fused filament fabrication of polymer materials: A review of interlayer bond
Gao, X., Qi, S., Kuang, X., Su, Y., Li, J., & Wang, D. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2020.101658 · Cited by 418
Extrusion-based additive manufacturing technologies: State of the art and future perspectives
Altıparmak, S. C., Yardley, V. A., Shi, Z., & Lin, J. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.09.032 · Cited by 320
Spoerk, M., Holzer, C., & Gonzalez‐Gutierrez, J. (2020) · Journal of Applied Polymer Science · doi:10.1002/app.48545 · Cited by 317
Self-citationPerformance of biocompatible PEEK processed by fused deposition additive manufacturing
Arif, M. F., Kumar, S., Varadarajan, K. M., & Cantwell, W. J. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.03.015 · Cited by 296
3D‐Printed Anisotropic Polymer Materials for Functional Applications
Chen, J., Liu, X., Tian, Y., Zhu, W., Yan, C., Shi, Y., Kong, L. B., Qi, H. J., & Zhou, K. (2022) · Advanced Materials · doi:10.1002/adma.202102877 · Cited by 281
Ajinjeru, C., Kishore, V., Lindahl, J., Sudbury, Z., Hassen, A. A., Post, B., Love, L., Kunc, V., & Duty, C. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-018-2510-z · Cited by 70
Zhou, X., Hsieh, S.-J., & Wang, J.-C. (2019) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-019-03813-z · Cited by 13
Metadata
- Authors
- Spoerk, M., Arbeiter, F., Cajner, H., Sapkota, J., & Holzer, C.
- Venue
- Journal of Applied Polymer Science
- Publisher
- Wiley
- Published
- 2017-06-26
- Volume
- 134
- Issue
- 41
- ISSN
- 0021-8995 (ISSN-L)
- 1097-4628
- OpenAlex
- W2685024654
- Cited by
- 227
- References
- 0
- FWCI
- 13.11
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.