CoChat

“Development of Advanced Noble Metal‐Alloy Electrocatalysts for Phosphoric Acid Fuel Cells (PAFC)”

Stonehart, Paul · 1990 · Berichte der Bunsengesellschaft für physikalische Chemie
Cited by 86

The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.

Abstract

In the preparation of highly dispersed noble metal electrocatalysts, the technology is such that crystallites now can be routinely prepared with small dimensions so that 50% of the atom content resides at the particle surface. The crystallite diameters are of the order of 12 Angstrøm (1.2 nanometers). Operation of these materials, when applied to phosphoric acid fuel cells as electrocatalysts is, of course, critical. What is important is the realization that due to the high surface energies of these crystallites, they have properties that are unlike the properties of the bulk metals. Although this manufacturing achievement is very great, more recently there has been increased emphasis on preparing alloys of metals with platinum in order to increase the kinetic rate of reaction for the oxygen reduction.—For oxygen reduction, binary alloys of platinum with refractory metals such as vanadium showed higher activity, but the vanadium was rapidly leached out. Alloys with chromium and subsequently with the addition of cobalt to form ternary alloys have now exhibited greater resistance to degradation. These alloys are hard and resistant to sintering, until the alloying element is leached out, then crystallite growth is obtained.—More recently, process modifications to produce ordered alloys have shown stability for over 9000 hours in the hot phosphoric acid fuel cell environment, as have alloys of platinum with cobalt and/or chromium containing gallium additions. It is one theory that there is no catalytic enhancement for oxygen reduction due to these alloying elements, but the increased reactivity is due solely to leaching out of the alloying elements from the alloy surface to produce a microroughness in the platinum crystallite.—In the case of hydrogen oxidation, especially in the presence of electrocatalyst poisons such as carbon monoxide and hydrogen sulphide, alloys of platinum with palladium show greater tolerance to poisoning and greater stability against crystallite growth. Other alloys are now under development to lower the catalyst cost and increase the electrocatalyst performance. This work is coupled with developments of advanced theoretical models that are amenable to computer solution for the operation of gas‐diffusion electrodes to maximize both the catalyst utilization within the electrode structure, and within the cell stack.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1002/bbpc.19900940907

Cites

2 of 2 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 2 references

Cited by

Metadata

Authors
Stonehart, P.
Venue
Berichte der Bunsengesellschaft für physikalische Chemie
Publisher
Wiley
Published
1990-09
Volume
94
Issue
9
Pages
913-921
ISSN
0005-9021 (ISSN-L)
OpenAlex
W2068327939
Cited by
86
References
2
FWCI
0.98
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.