The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Open and continuous fermentation: Products, conditions and bioprocess economy
Abstract
Microbial fermentation is the key to industrial biotechnology. Most fermentation processes are sensitive to microbial contamination and require an energy intensive sterilization process. The majority of microbial fermentations can only be conducted over a short period of time in a batch or fed‐batch culture, further increasing energy consumption and process complexity, and these factors contribute to the high costs of bio‐products. In an effort to make bio‐products more economically competitive, increased attention has been paid to developing open (unsterile) and continuous processes. If well conducted, continuous fermentation processes will lead to the reduced cost of industrial bio‐products. To achieve cost‐efficient open and continuous fermentations, the feeding of raw materials and the removal of products must be conducted in a continuous manner without the risk of contamination, even under ‘open’ conditions. Factors such as the stability of the biological system as a whole during long cultivations, as well as the yield and productivity of the process, are also important. Microorganisms that grow under extreme conditions such as high or low pH, high osmotic pressure, and high or low temperature, as well as under conditions of mixed culturing, cell immobilization, and solid state cultivation, are of interest for developing open and continuous fermentation processes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Factors affecting the fermentative lactic acid production from renewable resources1
Hofvendahl, K., & Hahn–Hägerdal, B. (2000) · Enzyme and Microbial Technology · doi:10.1016/s0141-0229(99)00155-6 · Cited by 895
Biotechnological advantages of laboratory-scale solid-state fermentation with fungi
H�lker, U., H�fer, M., & Lenz, J. (2004) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-003-1504-3 · Cited by 757
Production of Polyhydroxyalkanoates by Mixed Microbial Cultures
Reis, M. A. M., Serafim, L. S., Lemos, P. C., Ramos, A. M., Aguiar, F. R., & Van Loosdrecht, M. C. M. (2003) · Bioprocess and Biosystems Engineering · doi:10.1007/s00449-003-0322-4 · Cited by 301
Fed-batch versus batch fermentation
Longobardi, G. P. (1994) · Bioprocess Engineering · doi:10.1007/bf00369529 · Cited by 25
Cited by
Next generation industrial biotechnology based on extremophilic bacteria
Chen, G.-Q., & Jiang, X.-R. (2018) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2017.11.016 · Cited by 422
Self-citationGrand Challenges for Industrializing Polyhydroxyalkanoates (PHAs)
Tan, D., Wang, Y., Tong, Y., & Chen, G.-Q. (2021) · Trends in Biotechnology · doi:10.1016/j.tibtech.2020.11.010 · Cited by 311
Self-citationSer, H.-L., Law, J. W.-F., Chaiyakunapruk, N., Jacob, S. A., Palanisamy, U. D., Chan, K.-G., Goh, B.-H., & Lee, L.-H. (2016) · Frontiers in Microbiology · doi:10.3389/fmicb.2016.00522 · Cited by 104
“The main difference between batch and fed-batch fermentation systems is that the latter is frequently monitored with the assistance of sophisticated technologies and allows precise control of the entire fermentation process (Longobardi, 1994; Li et al., 2014).”
BackgroundFermentative Production of Lactic Acid as a Sustainable Approach to Valorize Household Bio-Waste
Tsapekos, P., Alvarado-Morales, M., Baladi, S., Bosma, E. F., & Angelidaki, I. (2020) · Frontiers in Sustainability · doi:10.3389/frsus.2020.00004 · Cited by 42
Metadata
- Authors
- Li, T., Chen, X., Chen, J., Wu, Q., & Chen, G.
- Venue
- Biotechnology Journal
- Publisher
- Wiley
- Published
- 2014-12
- Volume
- 9
- Issue
- 12
- Pages
- 1503-1511
- ISSN
- 1860-6768 (ISSN-L)
- 1860-7314
- OpenAlex
- W2078111273
- Cited by
- 166
- References
- 4
- FWCI
- 3.16
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.