The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Production of L(+)‐lactic acid from glucose and starch by immobilized cells of Rhizopus oryzae in a rotating fibrous bed bioreactor
Abstract
A rotating fibrous‐bed bioreactor (RFB) was developed for fermentation to produce L(+)‐lactic acid from glucose and cornstarch by Rhizopus oryzae. Fungal mycelia were immobilized on cotton cloth in the RFB for a prolonged period to study the fermentation kinetics and process stability. The pH and dissolved oxygen concentration (DO) were found to have significant effects on lactic acid productivity and yield, with pH 6 and 90% DO being the optimal conditions. A high lactic acid yield of 90% (w/w) and productivity of 2.5 g/L·h (467 g/h·m 2) was obtained from glucose in fed‐batch fermentation. When cornstarch was used as the substrate, the lactic acid yield was close to 100% (w/w) and the productivity was 1.65 g/L·h (300 g/h·m 2). The highest concentration of lactic acid achieved in these fed‐batch fermentations was 127 g/L. The immobilized‐cells fermentation in the RFB gave a virtually cell‐free fermentation broth and provided many advantages over conventional fermentation processes, especially those with freely suspended fungal cells. Without immobilization with the cotton cloth, mycelia grew everywhere in the fermentor and caused serious problems in reactor control and operation and consequently the fermentation was poor in lactic acid production. Oxygen transfer in the RFB was also studied and the volumetric oxygen transfer coefficients under various aeration and agitation conditions were determined and then used to estimate the oxygen transfer rate and uptake rate during the fermentation. The results showed that the oxygen uptake rate increased with increasing DO, indicating that oxygen transfer was limited by the diffusion inside the mycelial layer. © 2002 Wiley Periodicals, Inc. Biotechnol Bioeng 80: 1–12, 2002.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Factors affecting the fermentative lactic acid production from renewable resources1
Hofvendahl, K., & Hahn–Hägerdal, B. (2000) · Enzyme and Microbial Technology · doi:10.1016/s0141-0229(99)00155-6 · Cited by 895
Cited by
Recent advances in lactic acid production by microbial fermentation processes
Abdel-Rahman, M. A., Tashiro, Y., & Sonomoto, K. (2013) · Biotechnology Advances · doi:10.1016/j.biotechadv.2013.04.002 · Cited by 1,022
Nguyen, P. Q., Courchesne, N. D., Duraj‐Thatte, A., Praveschotinunt, P., & Joshi, N. S. (2018) · Advanced Materials · doi:10.1002/adma.201704847 · Cited by 566
Sustainability assessments of bio-based polymers
Hottle, T. A., Bilec, M. M., & Landis, A. E. (2013) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2013.06.016 · Cited by 525
Lactic acid production – producing microorganisms and substrates sources-state of art
Abedi, E., & Hashemi, S. M. B. (2020) · Heliyon · doi:10.1016/j.heliyon.2020.e04974 · Cited by 499
Qureshi, N., Annous, B. A., Ezeji, T. C., Karcher, P., & Maddox, I. S. (2005) · Microbial Cell Factories · doi:10.1186/1475-2859-4-24 · Cited by 410
Metadata
- Authors
- Tay, A., & Yang, S.
- Venue
- Biotechnology and Bioengineering
- Publisher
- Wiley
- Published
- 2002-08-09
- Volume
- 80
- Issue
- 1
- Pages
- 1-12
- ISSN
- 0006-3592 (ISSN-L)
- 1097-0290
- OpenAlex
- W2098670746
- Cited by
- 170
- References
- 1
- FWCI
- 4.60
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.