CoChat

Outdoor helical tubular photobioreactors for microalgal production: Modeling of fluid‐dynamics and mass transfer and assessment of biomass productivity

Hall, David O., Acién Fernández, F. G., Guerrero, E. Cañizares, Rao, K. Krishna, Grima, E. Molina · 2003 · Biotechnology and Bioengineering
Cited by 156

The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.

Abstract

The production of the microalga Phaeodactylum tricornutum in an outdoor helical reactor was analyzed. First, fluid dynamics, mass‐transfer capability, and mixing of the reactor was evaluated at different superficial gas velocities. Performance of the reactor was controlled by power input per culture volume. A maximum liquid velocity of 0.32 m s−1 and mass transfer coefficient of 0.006 s−1 were measured at 3200 W m−3. A model of the influence of superficial gas velocity on the following reactor parameters was proposed: gas hold‐up, induced liquid velocity, and mass transfer coefficient, with the accuracy of the model being demonstrated. Second, the influence of superficial gas velocity on the yield of the culture was evaluated in discontinuous and continuous cultures. Mean daily values of culture parameters, including dissolved oxygen, biomass concentration, chlorophyll fluorescence (F v/F m ratio), growth rate, biomass productivity, and photosynthetic efficiency, were determined. Different growth curves were measured when the superficial gas velocity was modified—the higher the superficial gas velocity, the higher the yield of the system. In continuous mode, biomass productivity increased by 35%, from 1.02 to 1.38 g L−1 d−1, when the superficial gas velocity increased from 0.27 to 0.41 m s−1. Maximal growth rates of 0.068 h−1, biomass productivities up to 1.4 g L−1 d−1, and photosynthetic efficiency of up to 15% were obtained at the higher superficial gas velocity of 0.41 m s−1. The fluorescence parameter, F v/F m, which reflects the maximal efficiency of PSII photochemistry, showed that the cultures were stressed at average irradiances within the culture higher than 280 μE m−2 s−1 at every superficial gas velocity. For nonstressed cultures, the yield of the system was a function of average irradiance inside the culture, with the superficial gas velocity determining this relationship. When superficial gas velocity was increased, higher growth rates, biomass productivities, and photosynthetic efficiencies were obtained for similar average irradiance values. The higher the superficial gas velocity, the higher the liquid velocity, with this increase enhancing the movement of the cells inside the culture. In this way the efficiency of the cells increased and higher biomass concentrations and productivities were reached for the same solar irradiance. © 2003 Wiley Periodicals, Inc. Biotechnol Bioeng 82: 62–73, 2003.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1002/bit.10543

Cites

4 of 4 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 4 references

Cited by

Metadata

Authors
Hall, D. O., Acién Fernández, F. G., Guerrero, E. C., Rao, K. K., & Grima, E. M.
Venue
Biotechnology and Bioengineering
Publisher
Wiley
Published
2003-01-30
Volume
82
Issue
1
Pages
62-73
ISSN
  • 0006-3592 (ISSN-L)
  • 1097-0290
OpenAlex
W2105878322
Cited by
156
References
4
FWCI
1.41
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.