The Stability Challenge on the Pathway to Low and Ultra‐Low Platinum Loading for Oxygen Reduction in Fuel Cells
Open accessThe DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
We report the influence of catalyst loading on rates of platinum degradation in acidic electrolyte at room temperature. A piezoelectric printer is used to deposit spotted arrays of a commercially available catalyst comprised of Pt nanoparticles on a porous carbon support. The kinetically controlled oxygen reduction reaction (ORR) activity at different loadings is measured using an electrochemical scanning flow cell (SFC), and found to be quite stable over the range of loadings studied. This behaviour, however, contrasts sharply with rates of both transient and quasi‐steady‐state platinum dissolution. These are shown using downstream inductively coupled plasma mass spectrometry (ICP‐MS) analytics, to increase as loading becomes lower. This dichotomy between activity and stability has direct implications for the development of improved catalyst materials, as well as for the achievement of current targets for reduced loadings of noble metals for fuel cells and other energy storage devices.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Lattice-strain control of the activity in dealloyed core–shell fuel cell catalysts
Strasser, P., Koh, S., Anniyev, T., Greeley, J., More, K., Yu, C., Liu, Z., Kaya, S., Nordlund, D., Ogasawara, H., et al. (2010) · Nature Chemistry · doi:10.1038/nchem.623 · Cited by 2,984
Characterization of High‐Surface‐Area Electrocatalysts Using a Rotating Disk Electrode Configuration
Schmidt, T. J., Gasteiger, H. A., Stäb, G. D., Urban, P. M., Kolb, D. M., & Behm, R. J. (1998) · Journal of The Electrochemical Society · doi:10.1149/1.1838642 · Cited by 1,131
Cited by
Precious Metal Free Hydrogen Evolution Catalyst Design and Application
Feidenhans’l, A. A., Regmi, Y. N., Wei, C., Xia, D., Kibsgaard, J., & King, L. A. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00712 · Cited by 499
Durability of platinum-based fuel cell electrocatalysts: Dissolution of bulk and nanoscale platinum
Cherevko, S., Kulyk, N., & Mayrhofer, K. J. J. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.03.005 · Cited by 377
Self-citationStability limits of tin-based electrocatalyst supports
Geiger, S., Kasian, O., Mingers, A. M., Mayrhofer, K. J. J., & Cherevko, S. (2017) · Scientific Reports · doi:10.1038/s41598-017-04079-9 · Cited by 182
Self-citationCherevko, S. (2018) · Current Opinion in Electrochemistry · doi:10.1016/j.coelec.2018.03.034 · Cited by 145
Self-citationSandbeck, D. J. S., Secher, N. M., Speck, F. D., Sørensen, J. E., Kibsgaard, J., Chorkendorff, I., & Cherevko, S. (2020) · ACS Catalysis · doi:10.1021/acscatal.0c00779 · Cited by 121
Self-citation
Metadata
- Authors
- Keeley, G. P., Cherevko, S., & Mayrhofer, K. J. J.
- Venue
- ChemElectroChem
- Publisher
- Wiley
- Published
- 2015-10-16
- Volume
- 3
- Issue
- 1
- Pages
- 51-54
- ISSN
- 2196-0216 (ISSN-L)
- OpenAlex
- W1851194680
- Cited by
- 73
- References
- 2
- FWCI
- 2.64
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The Stability Challenge on the Pathway to Low and Ultra‐Low Platinum Loading for Oxygen Reduction in Fuel Cells. https://app.cochat.ai/papers/10.1002/celc.201500425
- The paper
- Keeley, G. P., Cherevko, S., & Mayrhofer, K. J. J. (2016). The Stability Challenge on the Pathway to Low and Ultra‐Low Platinum Loading for Oxygen Reduction in Fuel Cells. ChemElectroChem. https://doi.org/10.1002/celc.201500425
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.