Hierarchical ZSM‐5 Zeolites in Shape‐Selective Xylene Isomerization: Role of Mesoporosity and Acid Site Speciation
The DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index.
Abstract
The isomerization of o‐xylene, a prototypical example of shape‐selective catalysis by zeolites, was investigated on hierarchical porous ZSM‐5. Extensive intracrystalline mesoporosity in ZSM‐5 was introduced by controlled silicon leaching with NaOH. In addition to the development of secondary porosity, the treatment also induced substantial aluminum redistribution, increasing the density of Lewis acid sites located at the external surface of the crystals. However, the strength of the remaining Brønsted sites was not changed. The mesoporous zeolite displayed a higher o‐xylene conversion than its parent, owing to the reduced diffusion limitations. However, the selectivity to p‐xylene decreased, and fast deactivation due to coking occurred. This is mainly due to the deleterious effect of acidity at the substantially increased external surface and near the pore mouths. A consecutive mild HCl washing of the hierarchical zeolite proved effective to increase the p‐xylene selectivity and reduce the deactivation rate. The HCl‐washed hierarchical ZSM‐5 displayed an approximately twofold increase in p‐xylene yield compared to the purely microporous zeolite. The reaction was followed by operando infrared spectroscopy to simultaneously monitor the catalytic performance and the buildup of carbonaceous deposits on the surface. Our results show that the interplay between activity, selectivity, and stability in modified zeolites can be optimized by relatively simple post‐synthesis treatments, such as base leaching (introduction of mesoporosity) and acid washing (surface acidity modification).
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Adsorption of Gases in Multimolecular Layers
Brunauer, S., Emmett, P. H., & Teller, E. (1938) · Journal of the American Chemical Society · doi:10.1021/ja01269a023 · Cited by 28,156
Barrett, E. P., Joyner, L. G., & Halenda, P. P. (1951) · Journal of the American Chemical Society · doi:10.1021/ja01145a126 · Cited by 13,172
Atlas of Zeolite Framework Types
(2007) · Elsevier eBooks · doi:10.1016/b978-0-444-53064-6.x5186-x · Cited by 2,493
Studies on pore systems in catalysts V. The t method
LIPPENS, B. (1965) · Journal of Catalysis · doi:10.1016/0021-9517(65)90307-6 · Cited by 2,274
Noda, I. (1993) · Applied Spectroscopy · doi:10.1366/0003702934067694 · Cited by 1,983
Pérez-Ramírez, J., Christensen, C. H., Egeblad, K., Christensen, C. H., & Groen, J. C. (2008) · Chemical Society Reviews · doi:10.1039/b809030k · Cited by 1,836
Self-citationCrystal structure and structure-related properties of ZSM-5
Olson, D. H., Kokotailo, G. T., Lawton, S. L., & Meier, W. M. (1981) · The Journal of Physical Chemistry · doi:10.1021/j150615a020 · Cited by 1,167
Impact of Zeolites on the Petroleum and Petrochemical Industry
Vermeiren, W., & Gilson, J.-P. (2009) · Topics in Catalysis · doi:10.1007/s11244-009-9271-8 · Cited by 994
Self-citationGeneration, Characterization, and Impact of Mesopores in Zeolite Catalysts
van Donk, S., Janssen, A. H., Bitter, J. H., & de Jong, K. P. (2003) · Catalysis Reviews · doi:10.1081/cr-120023908 · Cited by 852
Desilication: on the controlled generation of mesoporosity in MFI zeolites
Groen, J. C., Moulijn, J. A., & Pérez-Ramírez, J. (2006) · J. Mater. Chem. · doi:10.1039/b517510k · Cited by 587
Self-citation
Cited by
Recent advances in the textural characterization of hierarchically structured nanoporous materials
Cychosz, K. A., Guillet-Nicolas, R., García-Martínez, J., & Thommes, M. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00391e · Cited by 1,060
Synthesis strategies in the search for hierarchical zeolites
Serrano, D. P., Escola, J. M., & Pizarro, P. (2013) · Chem. Soc. Rev. · doi:10.1039/c2cs35330j · Cited by 792
Hierarchically Structured Zeolites: From Design to Application
Chen, L.-H., Sun, M.-H., Wang, Z., Yang, W., Xie, Z., & Su, B.-L. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00016 · Cited by 724
Design of hierarchical zeolite catalysts by desilication
Verboekend, D., & Pérez-Ramírez, J. (2011) · Catalysis Science & Technology · doi:10.1039/c1cy00150g · Cited by 712
Self-citationDownstream processing of lignin derived feedstock into end products
Wong, S. S., Shu, R., Zhang, J., Liu, H., & Yan, N. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00134a · Cited by 528
Probing the surfaces of heterogeneous catalysts by in situ IR spectroscopy
Lamberti, C., Zecchina, A., Groppo, E., & Bordiga, S. (2010) · Chemical Society Reviews · doi:10.1039/c0cs00117a · Cited by 491
Probing zeolites by vibrational spectroscopies
Bordiga, S., Lamberti, C., Bonino, F., Travert, A., & Thibault-Starzyk, F. (2015) · Chemical Society Reviews · doi:10.1039/c5cs00396b · Cited by 460
Optimizing the aromatic yield and distribution from catalytic fast pyrolysis of biomass over ZSM-5
Foster, A. J., Jae, J., Cheng, Y.-T., Huber, G. W., & Lobo, R. F. (2012) · Applied Catalysis A: General · doi:10.1016/j.apcata.2012.02.030 · Cited by 415
Zeolitic Materials with Hierarchical Porous Structures
Lopez‐Orozco, S., Inayat, A., Schwab, A., Selvam, T., & Schwieger, W. (2011) · Advanced Materials · doi:10.1002/adma.201100462 · Cited by 389
Hierarchical Y and USY Zeolites Designed by Post‐Synthetic Strategies
Verboekend, D., Vilé, G., & Pérez‐Ramírez, J. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201102411 · Cited by 364
Self-citationCatalysis with hierarchical zeolites
Holm, M. S., Taarning, E., Egeblad, K., & Christensen, C. H. (2011) · Catalysis Today · doi:10.1016/j.cattod.2011.01.007 · Cited by 361
Challenges on molecular aspects of dealumination and desilication of zeolites
Silaghi, M.-C., Chizallet, C., & Raybaud, P. (2014) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2014.02.040 · Cited by 325
From 3D to 2D zeolite catalytic materials
Přech, J., Pizarro, P., Serrano, D. P., & Čejka, J. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00370j · Cited by 313
Čejka, J., Centi, G., Perez-Pariente, J., & Roth, W. J. (2012) · Catalysis Today · doi:10.1016/j.cattod.2011.10.006 · Cited by 312
Li, J., Li, X., Zhou, G., Wang, W., Wang, C., Komarneni, S., & Wang, Y. (2014) · Applied Catalysis A: General · doi:10.1016/j.apcata.2013.10.040 · Cited by 309
Verboekend, D., & Pérez‐Ramírez, J. (2011) · Chemistry – A European Journal · doi:10.1002/chem.201002589 · Cited by 281
Self-citationFull Compositional Flexibility in the Preparation of Mesoporous MFI Zeolites by Desilication
Verboekend, D., Mitchell, S., Milina, M., Groen, J. C., & Pérez-Ramírez, J. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp201671s · Cited by 280
Self-citationTang, S., Zhang, C., Xue, X., Pan, Z., Wang, D., & Zhang, R. (2019) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2018.11.013 · Cited by 89
Metadata
- Authors
- Fernandez, C., Stan, I., Gilson, J., Thomas, K., Vicente, A., Bonilla, A., & Pérez‐Ramírez, J.
- Venue
- Chemistry – A European Journal
- Publisher
- Wiley
- Published
- 2010-05-25
- Volume
- 16
- Issue
- 21
- Pages
- 6224-6233
- ISSN
- 0947-6539 (ISSN-L)
- 1521-3765
- OpenAlex
- W2123716945
- Cited by
- 277
- References
- 34
- FWCI
- 10.68
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.