The DOI matches its Crossref record; 30 of the 30 references it cites were found in a registry or an index.
Fabrication of Environmentally Biodegradable Lignin Nanoparticles
Open accessAbstract
We developed a method for the fabrication of novel biodegradable nanoparticles (NPs) from lignin which are apparently non‐toxic for microalgae and yeast. We compare two alternative methods for the synthesis of lignin NPs which result in particles of very different stability upon change of pH. The first method is based on precipitation of low‐sulfonated lignin from an ethylene glycol solution by using diluted acidic aqueous solutions, which yields lignin NPs that are stable over a wide range of pH. The second approach is based on the acidic precipitation of lignin from a high‐pH aqueous solution which produces NPs stable only at low pH. Our study reveals that lignin NPs from the ethylene glycol‐based precipitation contain densely packed lignin domains which explain the stability of the NPs even at high pH. We characterised the properties of the produced lignin NPs and determined their loading capacities with hydrophilic actives. The results suggest that these NPs are highly porous and consist of smaller lignin domains. Tests with microalgae like Chlamydomonas reinhardtii and yeast incubated in lignin NP dispersions indicated that these NPs lack measurable effect on the viability of these microorganisms. Such biodegradable and environmentally compatible NPs can find applications as drug delivery vehicles, stabilisers of cosmetic and pharmaceutical formulations, or in other areas where they may replace more expensive and potentially toxic nanomaterials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cellulose nanomaterials review: structure, properties and nanocomposites
Moon, R. J., Martini, A., Nairn, J., Simonsen, J., & Youngblood, J. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00108b · Cited by 6,756
Sondi, I., & Salopek-Sondi, B. (2004) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2004.02.012 · Cited by 5,986
The Path Forward for Biofuels and Biomaterials
Ragauskas, A. J., Williams, C. K., Davison, B. H., Britovsek, G., Cairney, J., Eckert, C. A., Frederick, W. J., Hallett, J. P., Leak, D. J., Liotta, C. L., et al. (2006) · Science · doi:10.1126/science.1114736 · Cited by 5,741
Particles as surfactants—similarities and differences
Binks, B. P. (2002) · Current Opinion in Colloid & Interface Science · doi:10.1016/s1359-0294(02)00008-0 · Cited by 3,691
Sharifi, S., Behzadi, S., Laurent, S., Laird Forrest, M., Stroeve, P., & Mahmoudi, M. (2012) · Chem. Soc. Rev. · doi:10.1039/c1cs15188f · Cited by 1,460
Jessop, P. G. (2011) · Green Chemistry · doi:10.1039/c0gc00797h · Cited by 1,060
Gurr, J.-R., Wang, A. S. S., Chen, C.-H., & Jan, K.-Y. (2005) · Toxicology · doi:10.1016/j.tox.2005.05.007 · Cited by 1,022
Hydrothermal degradation of polymers derived from plants
Bobleter, O. (1994) · Progress in Polymer Science · doi:10.1016/0079-6700(94)90033-7 · Cited by 889
Charging of Oil−Water Interfaces Due to Spontaneous Adsorption of Hydroxyl Ions
Marinova, K. G., Alargova, R. G., Denkov, N. D., Velev, O. D., Petsev, D. N., Ivanov, I. B., & Borwankar, R. P. (1996) · Langmuir · doi:10.1021/la950928i · Cited by 836
Self-citationAntibacterial Activity of Nanosilver Ions and Particles
Sotiriou, G. A., & Pratsinis, S. E. (2010) · Environmental Science & Technology · doi:10.1021/es101072s · Cited by 832
Cited by
Lignin utilization: A review of lignin depolymerization from various aspects
Chio, C., Sain, M., & Qin, W. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.03.008 · Cited by 1,209
Figueiredo, P., Lintinen, K., Hirvonen, J. T., Kostiainen, M. A., & Santos, H. A. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.12.001 · Cited by 956
Chemistry, Structures, and Advanced Applications of Nanocomposites from Biorenewable Resources
Ates, B., Koytepe, S., Ulu, A., Gurses, C., & Thakur, V. K. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00553 · Cited by 749
A review on lignin-based polymeric, micro- and nano-structured materials
Duval, A., & Lawoko, M. (2014) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2014.09.017 · Cited by 733
A simple process for lignin nanoparticle preparation
Lievonen, M., Valle-Delgado, J. J., Mattinen, M.-L., Hult, E.-L., Lintinen, K., Kostiainen, M. A., Paananen, A., Szilvay, G. R., Setälä, H., & Österberg, M. (2016) · Green Chemistry · doi:10.1039/c5gc01436k · Cited by 664
An environmentally benign antimicrobial nanoparticle based on a silver-infused lignin core
Richter, A. P., Brown, J. S., Bharti, B., Wang, A., Gangwal, S., Houck, K., Cohen Hubal, E. A., Paunov, V. N., Stoyanov, S. D., & Velev, O. D. (2015) · Nature Nanotechnology · doi:10.1038/nnano.2015.141 · Cited by 604
Self-citationNatural biodegradable polymers based nano-formulations for drug delivery: A review
George, A., Shah, P. A., & Shrivastav, P. S. (2019) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2019.03.011 · Cited by 548
Lignin: Recent advances and emerging applications
Norgren, M., & Edlund, H. (2014) · Current Opinion in Colloid & Interface Science · doi:10.1016/j.cocis.2014.08.004 · Cited by 518
Collins, M. N., Nechifor, M., Tanasă, F., Zănoagă, M., McLoughlin, A., Stróżyk, M. A., Culebras, M., & Teacă, C.-A. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.03.069 · Cited by 486
Spherical lignin particles: a review on their sustainability and applications
Österberg, M., Sipponen, M. H., Mattos, B. D., & Rojas, O. J. (2020) · Green Chemistry · doi:10.1039/d0gc00096e · Cited by 454
Greener synthesis of lignin nanoparticles and their applications
Iravani, S., & Varma, R. S. (2020) · Green Chemistry · doi:10.1039/c9gc02835h · Cited by 447
Hossain, M. K., Arnab, A. A., Das, R. C., Hossain, K. M., Rubel, M. H. K., Rahman, M. F., Bencherif, H., Emetere, M. E., Mohammed, M. K. A., & Pandey, R. (2022) · RSC Advances · doi:10.1039/d2ra06734j · Cited by 431
Figueiredo, P., Lintinen, K., Kiriazis, A., Hynninen, V., Liu, Z., Bauleth-Ramos, T., Rahikkala, A., Correia, A., Kohout, T., Sarmento, B., et al. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2016.12.034 · Cited by 398
Rapid and near-complete dissolution of wood lignin at ≤80°C by a recyclable acid hydrotrope
Chen, L., Dou, J., Ma, Q., Li, N., Wu, R., Bian, H., Yelle, D. J., Vuorinen, T., Fu, S., Pan, X., et al. (2017) · Science Advances · doi:10.1126/sciadv.1701735 · Cited by 397
Lignin as a potential source of high-added value compounds: A review
Zevallos Torres, L. A., Lorenci Woiciechowski, A., de Andrade Tanobe, V. O., Karp, S. G., Guimarães Lorenci, L. C., Faulds, C., & Soccol, C. R. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.121499 · Cited by 389
Yang, W., Fortunati, E., Gao, D., Balestra, G. M., Giovanale, G., He, X., Torre, L., Kenny, J. M., & Puglia, D. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b03782 · Cited by 368
Synthesis and Characterization of Biodegradable Lignin Nanoparticles with Tunable Surface Properties
Richter, A. P., Bharti, B., Armstrong, H. B., Brown, J. S., Plemmons, D., Paunov, V. N., Stoyanov, S. D., & Velev, O. D. (2016) · Langmuir · doi:10.1021/acs.langmuir.6b01088 · Cited by 319
Self-citationMultifunctional lignin-based nanocomposites and nanohybrids
Lizundia, E., Sipponen, M. H., Greca, L. G., Balakshin, M., Tardy, B. L., Rojas, O. J., & Puglia, D. (2021) · Green Chemistry · doi:10.1039/d1gc01684a · Cited by 293
Review on lignin modifications toward natural UV protection ingredient for lignin-based sunscreens
Tran, M. H., Phan, D.-P., & Lee, E. Y. (2021) · Green Chemistry · doi:10.1039/d1gc01139a · Cited by 292
Tardy, B. L., Mattos, B. D., Otoni, C. G., Beaumont, M., Majoinen, J., Kämäräinen, T., & Rojas, O. J. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01333 · Cited by 267
Preparation and formation mechanism of size-controlled lignin nanospheres by self-assembly
Xiong, F., Han, Y., Wang, S., Li, G., Qin, T., Chen, Y., & Chu, F. (2017) · Industrial Crops and Products · doi:10.1016/j.indcrop.2017.02.025 · Cited by 259
Effect of Biomass as Nucleating Agents on Crystallization Behavior of Polylactic Acid
Shi, K., Liu, G., Sun, H., Yang, B., & Weng, Y. (2022) · Polymers · doi:10.3390/polym14204305 · Cited by 85
pH-Responsive Lignin-Based Nanomicelles for Oral Drug Delivery
Cheng, L., Deng, B., Luo, W., Nie, S., Liu, X., Yin, Y., Liu, S., Wu, Z., Zhan, P., Zhang, L., et al. (2020) · Journal of Agricultural and Food Chemistry · doi:10.1021/acs.jafc.9b08171 · Cited by 77
Strong, UV-blocking, and hydrophobic PVA composite films containing tunable lignin nanoparticles
Tian, R., Liu, Y., Wang, C., Jiang, W., Janaswamy, S., Yang, G., Ji, X., & Lyu, G. (2024) · Industrial Crops and Products · doi:10.1016/j.indcrop.2023.117842 · Cited by 42
Metadata
- Authors
- Frangville, C., Rutkevičius, M., Richter, A. P., Velev, O. D., Stoyanov, S. D., & Paunov, V. N.
- Venue
- ChemPhysChem
- Publisher
- Wiley
- Published
- 2012-10-09
- Volume
- 13
- Issue
- 18
- Pages
- 4235-4243
- ISSN
- 1439-4235 (ISSN-L)
- 1439-7641
- OpenAlex
- W2163744558
- Cited by
- 466
- References
- 30
- FWCI
- 2.62
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.