CoChat

Poly(ethylenimine)‐Functionalized Monolithic Alumina Honeycomb Adsorbents for CO2 Capture from Air

Sakwa‐Novak, Miles A., Yoo, Chun‐Jae, Tan, Shuai, Rashidi, Fereshteh, Jones, Christopher W. · 2016 · ChemSusChem
Cited by 113

The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.

Abstract

The development of practical and effective gas–solid contactors is an important area in the development of CO 2 capture technologies. Target CO 2 capture applications, such as postcombustion carbon capture and sequestration (CCS) from power plant flue gases or CO 2 extraction directly from ambient air (DAC), require high flow rates of gas to be processed at low cost. Extruded monolithic honeycomb structures, such as those employed in the catalytic converters of automobiles, have excellent potential as structured contactors for CO 2 adsorption applications because of the low pressure drop imposed on fluid moving through the straight channels of such structures. Here, we report the impregnation of poly(ethylenimine) (PEI), an effective aminopolymer reported commonly for CO 2 separation, into extruded monolithic alumina to form structured CO 2 sorbents. These structured sorbents are first prepared on a small scale, characterized thoroughly, and compared with powder sorbents with a similar composition. Despite consistent differences observed in the filling of mesopores with PEI between the monolithic and powder sorbents, their performance in CO 2 adsorption is similar across a range of PEI contents. A larger monolithic cylinder (1 inch diameter, 4 inch length) is evaluated under conditions closer to those that might be used in large‐scale applications and shows a similar performance to the smaller monoliths and powders tested initially. This larger structure is evaluated over five cycles of CO 2 adsorption and steam desorption and demonstrates a volumetric capacity of 350 mol and an equilibration time of 350 min under a 0.4 m s−1 linear flow velocity through the monolith channels using 400 ppm CO 2 in N 2 as the adsorption gas at 30 °C. This volumetric capacity surpasses that of a similar technology considered previously, which suggested that CO 2 could be removed from air at an operating cost as low as $100 per ton.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1002/cssc.201600404

Cites

10 of 10 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 10 references

Cited by

Metadata

Authors
Sakwa‐Novak, M. A., Yoo, C., Tan, S., Rashidi, F., & Jones, C. W.
Venue
ChemSusChem
Publisher
Wiley
Published
2016-06-15
Volume
9
Issue
14
Pages
1859-1868
ISSN
  • 1864-5631 (ISSN-L)
  • 1864-564X
OpenAlex
W2422489405
Cited by
113
References
10
FWCI
7.67
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.