A Quantitative Metric for the Design of Selective Supercritical CO2 Extraction of Lithium from Geothermal Brine
The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
As demand grows for lithium, its recovery from geothermal brines provides an attractive alternative to slow mining. One promising extraction method uses crown ethers as extractants in supercritical carbon dioxide with cation exchangers to facilitate extraction from brine. Molecular dynamics modeling is used to understand the mechanism of binding between lithium (or sodium) and combinations of 14‐crown‐4 ethers and cation exchangers, and the predictive capability of computational modeling to test lithium selectivity is established for four combinations of crown ethers [methylene‐14‐crown‐4 (M14C4) and a fluorinated 14‐crown‐4 (F14C4)] and cation exchangers [di(2‐ethyl‐hexyl)phosphoric acid (HDEHP) and tetraethylammonium perfluoro‐1‐octanesulfonate (TPFOS)]. Binding free energies (given in kcal mol−1) of lithium and sodium, respectively, to crown ether–cation exchangers are 85 and 71 for M14C4–HDEHP, 90 and 71 for F14C4–HDEHP, 93 and 80 for M14C4–TPFOS, and 104 and 93 for F14C4–TPFOS. Good agreement is found between computational predictions and supercritical carbon dioxide extraction experiments at 60 °C and 250 bar. Binding free energy gives a suitable metric to describe extraction efficiency. Differences in the binding free energies of sodium and lithium to crown ethers determine the extraction selectivity. Fluorine groups are found to exert a positive influence to optimize extraction efficiency. Of the systems studied, F14C4 with TPFOS offers the most selective and efficient extraction system.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The development and future of lithium ion batteries
Blomgren, G. E. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0251701jes · Cited by 1,940
Grosjean, C., Miranda, P. H., Perrin, M., & Poggi, P. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2011.11.023 · Cited by 847
Global Lithium Availability: A Constraint for Electric Vehicles?
Gruber, P. W., Medina, P. A., Keoleian, G. A., Kesler, S. E., Everson, M. P., & Wallington, T. J. (2011) · Journal of Industrial Ecology · doi:10.1111/j.1530-9290.2011.00359.x · Cited by 620
Green solvents for green technologies
Cvjetko Bubalo, M., Vidović, S., Radojčić Redovniković, I., & Jokić, S. (2015) · Journal of Chemical Technology & Biotechnology · doi:10.1002/jctb.4668 · Cited by 453
Cited by
Technology for the Recovery of Lithium from Geothermal Brines
Stringfellow, W. T., & Dobson, P. F. (2021) · Energies · doi:10.3390/en14206805 · Cited by 293
“Crown ethers have been used with supercritical carbon dioxide (CO2) as a diluent [187,189,190].”
BackgroundMethodResultInfluentialThe recovery and separation of lithium by using solvent extraction methods
Kanagasundaram, T., Murphy, O., Haji, M. N., & Wilson, J. J. (2024) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2024.215727 · Cited by 263
Direct lithium extraction: A new paradigm for lithium production and resource utilization
Farahbakhsh, J., Arshadi, F., Mofidi, Z., Mohseni-Dargah, M., Kök, C., Assefi, M., Soozanipour, A., Zargar, M., Asadnia, M., Boroumand, Y., et al. (2024) · Desalination · doi:10.1016/j.desal.2023.117249 · Cited by 260
Nikkhah, H., Ipekçi, D., Xiang, W., Stoll, Z., Xu, P., Li, B., McCutcheon, J. R., & Beykal, B. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.155349 · Cited by 154
Lithium carbonate recovery from brines using membrane electrolysis
Torres, W. R., Díaz Nieto, C. H., Prévoteau, A., Rabaey, K., & Flexer, V. (2020) · Journal of Membrane Science · doi:10.1016/j.memsci.2020.118416 · Cited by 57
Chandrasekharam, D., Şener, M. F., Recepoğlu, Y. K., Isık, T., Demir, M. M., & Baba, A. (2024) · Geothermics · doi:10.1016/j.geothermics.2024.102959 · Cited by 45
Metadata
- Authors
- Ruttinger, A. W., Pálsdóttir, A., Tester, J. W., & Clancy, P.
- Venue
- ChemSusChem
- Publisher
- Wiley
- Published
- 2019-07-16
- Volume
- 12
- Issue
- 15
- Pages
- 3532-3540
- ISSN
- 1864-5631 (ISSN-L)
- 1864-564X
- OpenAlex
- W2955353186
- Cited by
- 20
- References
- 4
- FWCI
- 0.84
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.