The DOI matches its Crossref record; 56 of the 56 references it cites were found in a registry or an index.
Review on use of phase change materials in battery thermal management for electric and hybrid electric vehicles: Review on use of PCM in battery thermal management for EV and HEV
Abstract
The battery electric vehicle is evolving and has the potential to replace conventional internal combustion-based vehicles in the future. Batteries are the major power source of these vehicles. A thermal management system is required for a battery to attain effective operation and long life in all environmental conditions. Although several types of thermal management system are available, there remains a need to address various issues like high power consumption, narrow optimum temperature range and operation in varying climates. Phase change materials can assist in resolving these issues. In this paper, battery thermal management systems for electric and hybrid electric vehicles are reviewed, and challenges and opportunities for battery electric vehicles are discussed. Cooling strategies used in various thermal management systems are explained. Applications of and issues regarding the use of phase change materials in thermal management systems are also reviewed. Potential bottlenecks that need to be addressed in electric vehicle technology are explained, as are important achievement milestones and trends regarding the growth of the electric vehicle industry. It is shown that using graphite can increase thermal conductivity of PCMs by up to 70 W m- 1K- 1. Some commercially available passive thermal management systems for batteries use wax and graphite, which can increase the driving range of an electric scooter from 30 km to 55 km. Copyright © 2016 John Wiley & Sons, Ltd.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Helical microtubules of graphitic carbon
Iijima, S. (1991) · Nature · doi:10.1038/354056a0 · Cited by 43,098
Review on thermal energy storage with phase change materials and applications
Sharma, A., Tyagi, V. V., Chen, C. R., & Buddhi, D. (2009) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2007.10.005 · Cited by 5,936
Zalba, B., Marı́n, J. M., Cabeza, L. F., & Mehling, H. (2003) · Applied Thermal Engineering · doi:10.1016/s1359-4311(02)00192-8 · Cited by 4,738
A review on phase change energy storage: materials and applications
Farid, M. M., Khudhair, A. M., Razack, S. A. K., & Al-Hallaj, S. (2004) · Energy Conversion and Management · doi:10.1016/j.enconman.2003.09.015 · Cited by 3,097
Review on recent progress of nanostructured anode materials for Li-ion batteries
Goriparti, S., Miele, E., De Angelis, F., Di Fabrizio, E., Proietti Zaccaria, R., & Capiglia, C. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.11.103 · Cited by 2,092
Rapidly falling costs of battery packs for electric vehicles
Nykvist, B., & Nilsson, M. (2015) · Nature Climate Change · doi:10.1038/nclimate2564 · Cited by 1,819
Low temperature latent heat thermal energy storage: Heat storage materials
Abhat, A. (1983) · Solar Energy · doi:10.1016/0038-092x(83)90186-x · Cited by 1,711
Recent developments in cathode materials for lithium ion batteries
Fergus, J. W. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.08.089 · Cited by 1,561
A review of power battery thermal energy management
Rao, Z., & Wang, S. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2011.07.096 · Cited by 1,207
The rechargeable revolution: a better battery
Van Noorden, R. (2014) · Nature · doi:10.1038/507026a · Cited by 1,047
Development of a recycling process for Li-ion batteries
Georgi-Maschler, T., Friedrich, B., Weyhe, R., Heegn, H., & Rutz, M. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.01.152 · Cited by 836
Reciprocating air flow for Li-ion battery thermal management to improve temperature uniformity
Mahamud, R., & Park, C. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.02.076 · Cited by 787
Sabbah, R., Kizilel, R., Selman, J. R., & Al-Hallaj, S. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.03.082 · Cited by 680
Thermal conductivity enhancement of phase change materials using a graphite matrix
Mills, A., Farid, M., Selman, J. R., & Al-Hallaj, S. (2006) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2005.11.022 · Cited by 627
Ling, Z., Zhang, Z., Shi, G., Fang, X., Wang, L., Gao, X., Fang, Y., Xu, T., Wang, S., & Liu, X. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.12.017 · Cited by 558
An alternative cooling system to enhance the safety of Li-ion battery packs
Kizilel, R., Sabbah, R., Selman, J. R., & Al-Hallaj, S. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.06.074 · Cited by 513
Fan, L.-W., Fang, X., Wang, X., Zeng, Y., Xiao, Y.-Q., Yu, Z.-T., Xu, X., Hu, Y.-C., & Cen, K.-F. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.04.043 · Cited by 478
The future of automotive lithium-ion battery recycling: Charting a sustainable course
Gaines, L. (2014) · Sustainable Materials and Technologies · doi:10.1016/j.susmat.2014.10.001 · Cited by 473
Khateeb, S. A., Farid, M. M., Selman, J. R., & Al-Hallaj, S. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2003.09.070 · Cited by 405
Wang, J., Xie, H., Xin, Z., Li, Y., & Chen, L. (2010) · Solar Energy · doi:10.1016/j.solener.2009.12.004 · Cited by 395
Yuksel, T., & Michalek, J. J. (2015) · Environmental Science & Technology · doi:10.1021/es505621s · Cited by 380
Heat transfer and thermal management with PCMs in a Li-ion battery cell for electric vehicles
Javani, N., Dincer, I., Naterer, G. F., & Yilbas, B. S. (2014) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2013.12.076 · Cited by 370
Self-citationKaraipekli, A., Sarı, A., & Kaygusuz, K. (2007) · Renewable Energy · doi:10.1016/j.renene.2006.11.011 · Cited by 364
Performance of batteries for electric vehicles on short and longer term
Gerssen-Gondelach, S. J., & Faaij, A. P. C. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.03.085 · Cited by 359
Heat transfer in phase change materials for thermal management of electric vehicle battery modules
Duan, X., & Naterer, G. F. (2010) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2010.07.044 · Cited by 335
Al-Hallaj, S., & Selman, J. R. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00196-9 · Cited by 325
Cost and CO2 aspects of future vehicle options in Europe under new energy policy scenarios
Thiel, C., Perujo, A., & Mercier, A. (2010) · Energy Policy · doi:10.1016/j.enpol.2010.07.034 · Cited by 313
Realizing the electric-vehicle revolution
Tran, M., Banister, D., Bishop, J. D. K., & McCulloch, M. D. (2012) · Nature Climate Change · doi:10.1038/nclimate1429 · Cited by 312
Kizilel, R., Lateef, A., Sabbah, R., Farid, M. M., Selman, J. R., & Al-Hallaj, S. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.04.050 · Cited by 301
Economies of scale for future lithium-ion battery recycling infrastructure
Wang, X., Gaustad, G., Babbitt, C. W., & Richa, K. (2014) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2013.11.009 · Cited by 282
Thermal conductivity enhancement of Ag nanowires on an organic phase change material
Zeng, J. L., Cao, Z., Yang, D. W., Sun, L. X., & Zhang, L. (2010) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-009-0472-y · Cited by 281
Carbon nanoadditives to enhance latent energy storage of phase change materials
Shaikh, S., Lafdi, K., & Hallinan, K. (2008) · Journal of Applied Physics · doi:10.1063/1.2903538 · Cited by 256
Modeling of passive thermal management for electric vehicle battery packs with PCM between cells
Javani, N., Dincer, I., Naterer, G. F., & Rohrauer, G. L. (2014) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2014.07.037 · Cited by 249
Self-citationCosts of lithium-ion batteries for vehicles
Gaines, L., & Cuenca, R. (2000) · doi:10.2172/761281 · Cited by 247
Failure mechanism of Li-ion battery at overcharge conditions
Belov, D., & Yang, M.-H. (2008) · Journal of Solid State Electrochemistry · doi:10.1007/s10008-007-0449-3 · Cited by 243
Temperature Dependence of Electrical and Thermal Conduction in Single Silver Nanowire
Cheng, Z., Liu, L., Xu, S., Lu, M., & Wang, X. (2015) · Scientific Reports · doi:10.1038/srep10718 · Cited by 229
Cheng, W.-L., Rong-ming, Z., Xie, K., Liu, N., & Wang, J. (2010) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2010.05.020 · Cited by 227
Lithium titanate as anode material for lithium-ion cells: a review
Sandhya, C. P., John, B., & Gouri, C. (2014) · Ionics · doi:10.1007/s11581-014-1113-4 · Cited by 217
Status and development of electric vehicle integrated thermal management from BTM to HVAC
Zhang, T., Gao, C., Gao, Q., Wang, G., Liu, M., Guo, Y., Xiao, C., & Yan, Y. Y. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.02.001 · Cited by 189
Choi, D. H., Lee, J., Hong, H., & Kang, Y. T. (2014) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2014.02.004 · Cited by 187
Weiss, M., Patel, M. K., Junginger, M., Perujo, A., Bonnel, P., & van Grootveld, G. (2012) · Energy Policy · doi:10.1016/j.enpol.2012.05.038 · Cited by 175
Kumaresan, V., Velraj, R., & Das, S. K. (2012) · Heat and Mass Transfer · doi:10.1007/s00231-012-0980-3 · Cited by 170
Vadivel Murugan, A., Muraliganth, T., & Manthiram, A. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3028304 · Cited by 168
Going electric: Expert survey on the future of battery technologies for electric vehicles
Catenacci, M., Verdolini, E., Bosetti, V., & Fiorese, G. (2013) · Energy Policy · doi:10.1016/j.enpol.2013.06.078 · Cited by 143
Experimental research on heat transfer mechanism of heat sink with composite phase change materials
Yin, H., Gao, X., Ding, J., & Zhang, Z. (2008) · Energy Conversion and Management · doi:10.1016/j.enconman.2007.10.022 · Cited by 129
Battery and battery management for hybrid electric vehicles: a review
Conte, F. V. (2006) · e+i Elektrotechnik und Informationstechnik · doi:10.1007/s00502-006-0383-6 · Cited by 127
Liu, Y., Li, X., Guo, H., Zhixing, W., Hu, Q., Peng, W., & Yong, Y. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.08.044 · Cited by 125
Investigation of the kinetic mechanism in overcharge process for Li-ion battery
Belov, D. G., & Yang, M. (2008) · Solid State Ionics · doi:10.1016/j.ssi.2008.04.031 · Cited by 114
Thermal and electrochemical behaviour of C/LixCoO2 cell during safety test
Doh, C., Kim, D.-H., Kim, H.-S., Shin, H.-M., Jeong, Y., Moon, S., Jin, B., Eom, S.-W., Kim, H., Kim, K.-W., et al. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.09.102 · Cited by 104
The EV paradox – A multilevel study of why Stockholm is not a leader in electric vehicles
Nykvist, B., & Nilsson, M. (2014) · Environmental Innovation and Societal Transitions · doi:10.1016/j.eist.2014.06.003 · Cited by 83
Life-Cycle Analysis of Production and Recycling of Lithium Ion Batteries
Gaines, L. L., Sullivan, J. L., Burnham, A., & Belharouak, I. (2011) · Transportation Research Record Journal of the Transportation Research Board · doi:10.3141/2252-08 · Cited by 83
Advanced Batteries for Electric Vehicles: An Assessment of Performance, Cost, and Availability
Anderman, M., Kalhammer, F. R., & MacArthur, D. K. (2000) · Cited by 61
Yan, Q., Chen, L., & Lin, Z. (2008) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.07.002 · Cited by 55
Zhang, G. H., & Zhao, C. (2013) · Renewable Energy · doi:10.1016/j.renene.2013.05.041 · Cited by 42
New latent heat storage system with nanoparticles for thermal management of electric vehicles
Javani, N., Dinçer, İ., & Naterer, G. F. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.06.107 · Cited by 39
Kannappan, S., Karthikeyan, K., Manian, R. K., et al. (2013) · arXiv (Cornell University) · doi:10.48550/arxiv.1311.1548 · Cited by 34
Cited by
Recent advances of thermal safety of lithium ion battery for energy storage
Lyu, P., Liu, X., Qu, J., Zhao, J., Huo, Y., Qu, Z., & Rao, Z. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2020.06.042 · Cited by 624
Phase-change materials (PCM) for automotive applications: a review
Jaguemont, J., Omar, N., Van den Bossche, P., & Mierlo, J. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.12.097 · Cited by 451
Electric vehicles batteries thermal management systems employing phase change materials
Ianniciello, L., Biwolé, P. H., & Achard, P. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.12.071 · Cited by 426
Metadata
- Authors
- Malik, M., Dincer, I., & Rosen, M. A.
- Venue
- International Journal of Energy Research
- Publisher
- Hindawi Limited
- Published
- 2016-02-02
- Volume
- 40
- Issue
- 8
- Pages
- 1011-1031
- ISSN
- 0363-907X (ISSN-L)
- OpenAlex
- W2295269567
- Cited by
- 257
- References
- 56
- FWCI
- 19.65
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.