The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Review: Durability and Degradation Issues of PEM Fuel Cell Components
Abstract
Besides cost reduction, durability is the most important issue to be solved before commercialisation of PEM Fuel Cells can be successful. For a fuel cell operating under constant load conditions, at a relative humidity close to 100% and at a temperature of maximum 75 °C, using optimal stack and flow design, the voltage degradation can be as low as 1–2 μV·h. However, the degradation rates can increase by orders of magnitude when conditions include some of the following, i.e. load cycling, start–stop cycles, low humidification or humidification cycling, temperatures of 90 °C or higher and fuel starvation. This review paper aims at assessing the degradation mechanisms of membranes, electrodes, bipolar plates and seals. By collecting long‐term experiments as well, the relative importance of these degradation mechanisms and the operating conditions become apparent.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Gasteiger, H. A., Kocha, S. S., Sompalli, B., & Wagner, F. T. (2005) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2004.06.021 · Cited by 4,876
Advanced materials for improved PEMFC performance and life
Curtin, D. E., Lousenberg, R. D., Henry, T. J., Tangeman, P. C., & Tisack, M. E. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2004.01.023 · Cited by 786
Degradation of sealings for PEFC test cells during fuel cell operation
Schulze, M., Knöri, T., Schneider, A., & Gülzow, E. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2003.09.017 · Cited by 121
Zhang, L., Ma, C., & Mukerjee, S. (2003) · Electrochimica Acta · doi:10.1016/s0013-4686(03)00257-3 · Cited by 102
Ascarelli, P., Contini, V., & Giorgi, R. (2002) · Journal of Applied Physics · doi:10.1063/1.1453495 · Cited by 63
Cited by
Recent Advances in Electrocatalytic Hydrogen Evolution Using Nanoparticles
Zhu, J., Hu, L., Zhao, P., Lee, L. Y. S., & Wong, K.-Y. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00248 · Cited by 3,133
New roads and challenges for fuel cells in heavy-duty transportation
Cullen, D. A., Neyerlin, K. C., Ahluwalia, R. K., Mukundan, R., More, K. L., Borup, R. L., Weber, A. Z., Myers, D. J., & Kusoglu, A. (2021) · Nature Energy · doi:10.1038/s41560-021-00775-z · Cited by 1,277
Ren, P., Pei, P., Li, Y., Wu, Z., Chen, D., & Huang, S. (2020) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2020.100859 · Cited by 737
Truncated Octahedral Pt3Ni Oxygen Reduction Reaction Electrocatalysts
Wu, J., Zhang, J., Peng, Z., Yang, S., Wagner, F. T., & Yang, H. (2010) · Journal of the American Chemical Society · doi:10.1021/ja100571h · Cited by 520
Zhang, H., Jin, M., & Xia, Y. (2012) · Chemical Society Reviews · doi:10.1039/c2cs35173k · Cited by 519
Metadata
- Authors
- de Bruijn, F. A., Dam, V. A. T., & Janssen, G. J. M.
- Venue
- Fuel Cells
- Publisher
- Wiley
- Published
- 2008-02
- Volume
- 8
- Issue
- 1
- Pages
- 3-22
- ISSN
- 1615-6846 (ISSN-L)
- 1615-6854
- OpenAlex
- W2163973332
- Cited by
- 1,001
- References
- 5
- FWCI
- 39.45
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
