The DOI matches its Crossref record; 23 of the 23 references it cites were found in a registry or an index.
Durability Studies of PBI‐based High Temperature PEMFCs
Abstract
Long‐term durability testing of polybenzimidazole (PBI)‐based polymer electrolyte membrane (PEM) fuel cells was performed using test protocols designed to simulate fuel cell operational situations which may be found in real applications. The fuel cell voltages and phosphoric acid (PA) loss were carefully monitored over thousands of hours and hundreds of cycles. In the typical operating range for high temperature PEM fuel cells (160 °C), the fuel cell voltage degradation rate was 4.9 μV h–1 for steady‐state operation. The PA loss rates were generally low and indicated that long‐term operation (>10,000 h) was possible without significant performance degradation due to PA loss from the membrane. Dynamic durability tests also showed that the PA loss rate from the membrane electrode assemblies (MEAs) depended on cell operating temperature and load conditions. Under all conditions, the PA loss was a relatively small amount of the total PA in the membrane.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Instability of Pt∕C Electrocatalysts in Proton Exchange Membrane Fuel Cells
Ferreira, P. J., la O’, G. J., Shao-Horn, Y., Morgan, D., Makharia, R., Kocha, S., & Gasteiger, H. A. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.2050347 · Cited by 1,491
Kinetic Model of Platinum Dissolution in PEMFCs
Darling, R. M., & Meyers, J. P. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1613669 · Cited by 688
Electrocatalytic Corrosion of Carbon Support in PEMFC Cathodes
Roen, L. M., Paik, C. H., & Jarvi, T. D. (2004) · Electrochemical and Solid-State Letters · doi:10.1149/1.1630412 · Cited by 658
Li, Q., He, R., Jensen, J. O., & Bjerrum, N. J. (2004) · Fuel Cells · doi:10.1002/fuce.200400020 · Cited by 637
Characterization of Vulcan Electrochemically Oxidized under Simulated PEM Fuel Cell Conditions
Kangasniemi, K. H., Condit, D. A., & Jarvi, T. D. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1649756 · Cited by 599
High-Temperature Polybenzimidazole Fuel Cell Membranes via a Sol−Gel Process
Xiao, L., Zhang, H., Scanlon, E., Ramanathan, L. S., Choe, E., Rogers, D., Apple, T. M., & Benicewicz, B. C. (2005) · Chemistry of Materials · doi:10.1021/cm050831+ · Cited by 579
Self-citationPEM fuel cell cathode carbon corrosion due to the formation of air/fuel boundary at the anode
Tang, H., Qi, Z., Ramani, M., & Elter, J. F. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.10.059 · Cited by 488
A fuel cell using acid doped polybenzimidazole as polymer electrolyte
Wang, J.-T., Savinell, R. F., Wainright, J., Litt, M., & Yu, H. (1996) · Electrochimica Acta · doi:10.1016/0013-4686(95)00313-4 · Cited by 474
Aspects of the Chemical Degradation of PFSA Ionomers used in PEM Fuel Cells
Healy, J., Hayden, C., Xie, T., Olson, K., Waldo, R., Brundage, M., Gasteiger, H., & Abbott, J. (2005) · Fuel Cells · doi:10.1002/fuce.200400050 · Cited by 384
Xie, J., Wood, D. L., More, K. L., Atanassov, P., & Borup, R. L. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.1873492 · Cited by 370
Cited by
Recent Development of Polymer Electrolyte Membranes for Fuel Cells
Zhang, H., & Shen, P. K. (2012) · Chemical Reviews · doi:10.1021/cr200035s · Cited by 1,361
High temperature proton exchange membranes based on polybenzimidazoles for fuel cells
Li, Q., Jensen, J. O., Savinell, R. F., & Bjerrum, N. J. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.12.003 · Cited by 1,323
High temperature (HT) polymer electrolyte membrane fuel cells (PEMFC) – A review
Chandan, A., Hattenberger, M., El-kharouf, A., Du, S., Dhir, A., Self, V., Pollet, B. G., Ingram, A., & Bujalski, W. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.11.126 · Cited by 926
Haider, R., Wen, Y., Ma, Z.-F., Wilkinson, D. P., Zhang, L., Yuan, X., Song, S., & Zhang, J. (2021) · Chemical Society Reviews · doi:10.1039/d0cs00296h · Cited by 785
Asensio, J. A., Sánchez, E. M., & Gómez-Romero, P. (2010) · Chemical Society Reviews · doi:10.1039/b922650h · Cited by 746
A comprehensive review of PBI-based high temperature PEM fuel cells
Araya, S. S., Zhou, F., Liso, V., Sahlin, S. L., Vang, J. R., Thomas, S., Gao, X., Jeppesen, C., & Kær, S. K. (2016) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2016.09.024 · Cited by 463
Tang, H., Geng, K., Wu, L., Liu, J., Chen, Z., You, W., Yan, F., Guiver, M. D., & Li, N. (2022) · Nature Energy · doi:10.1038/s41560-021-00956-w · Cited by 335
Metadata
- Authors
- Yu, S., Xiao, L., & Benicewicz, B. C.
- Venue
- Fuel Cells
- Publisher
- Wiley
- Published
- 2008-07
- Volume
- 8
- Issue
- 3-4
- Pages
- 165-174
- ISSN
- 1615-6846 (ISSN-L)
- 1615-6854
- OpenAlex
- W2100979925
- Cited by
- 310
- References
- 23
- FWCI
- 14.64
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.