Robotic Extrusion of Algae‐Laden Hydrogels for Large‐Scale Applications
Open accessThe DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
A bioprinting technique for large‐scale, custom‐printed immobilization of microalgae is developed for potential applications within architecture and the built environment. Alginate‐based hydrogels with various rheology modifying polymers and varying water percentages are characterized to establish a window of operation suitable for layer‐by‐layer deposition on a large scale. Hydrogels formulated with methylcellulose and carrageenan, with water percentages ranging from 80% to 92.5%, demonstrate a dominant viscoelastic solid–like property with G′ > G″ and a low phase angle, making them the most suitable for extrusion‐based printing. A custom multimaterial pneumatic extrusion system is developed to be attached on the end effector of an industrial multiaxis robot arm, allowing precision‐based numerically controlled layered deposition of the viscous hydrogel. The relationship between the various printing parameters, namely air pressure, material viscosity, viscoelasticity, feed rate, printing distance, nozzle diameter, and the speed of printing, are characterized to achieve the desired resolution of the component. Printed prototypes are postcured in CaCl 2 via crosslinking. Biocompatibility tests show that cells can survive for 21 days after printing the constructs. To demonstrate the methodology for scale‐up, a 1000 × 500 mm fibrous hydrogel panel is additively deposited with 3 different hydrogels with varying water percentages.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hydrogel: Preparation, characterization, and applications: A review
Ahmed, E. M. (2015) · Journal of Advanced Research · doi:10.1016/j.jare.2013.07.006 · Cited by 5,800
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
de-Bashan, L. E., Bashan, Y., Moreno, M., Lebsky, V. K., & Bustillos, J. J. (2002) · Canadian Journal of Microbiology · doi:10.1139/w02-051 · Cited by 222
Cited by
El-Sheekh, M. M., El-Kassas, H. Y., & Ali, S. S. (2025) · Microbial Cell Factories · doi:10.1186/s12934-024-02638-0 · Cited by 86
“The findings of this study have significant implications for various industrial applications, particularly in the areas of microalgal bioremediation, bioenergy, and bioremediation, as it presents a commercially feasible method [138].”
New Trends in Biotechnological Applications of Photosynthetic Microorganisms
Dawiec-Liśniewska, A., Podstawczyk, D., Bastrzyk, A., Czuba, K., Pacyna-Iwanicka, K., Okoro, O. V., & Shavandi, A. (2022) · Biotechnology Advances · doi:10.1016/j.biotechadv.2022.107988 · Cited by 66
Photosynthetic Microorganisms for the Oxygenation of Advanced 3D Bioprinted Tissues
Ortega, J. S., Corrales-Orovio, R., Ralph, P., Egaña, J. T., & Gentile, C. (2023) · Acta Biomaterialia · doi:10.1016/j.actbio.2022.05.009 · Cited by 47
Microalgae-based 3D bioprinting: recent advances, applications and perspectives
Tang, J., Sun, J., Cui, J., Yuan, X., Luan, G., & Lu, X. (2025) · Marine Drugs · doi:10.3390/md23090342 · Cited by 8
“Hydrogel systems constitute the principal matrix platform for microalgae-based 3D bioprinting, with alginate, starch, and carrageenan emerging as predominant choices due to the structural adaptability and biological compatibility [39].”
Rasheed, A. S., Thajuddin, F., Elumalai, A., Thajuddin, S. F., Nooruddin, T., & Dharumadurai, D. (2026) · Biotechnology and Bioprocess Engineering · doi:10.1007/s12257-026-00285-3
Metadata
- Authors
- Malik, S., Hagopian, J., Mohite, S., Lintong, C., Stoffels, L., Giannakopoulos, S., Beckett, R., Leung, C., Ruiz, J., Cruz, M., & Parker, B.
- Venue
- Global Challenges
- Publisher
- Wiley
- Published
- 2019-11-11
- Volume
- 4
- Issue
- 1
- Pages
- 1900064-1900064
- ISSN
- 2056-6646 (ISSN-L)
- OpenAlex
- W2982721676
- Cited by
- 73
- References
- 3
- FWCI
- 2.40
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Robotic Extrusion of Algae‐Laden Hydrogels for Large‐Scale Applications. https://app.cochat.ai/papers/10.1002/gch2.201900064
- The paper
- Malik, S., Hagopian, J., Mohite, S., Lintong, C., Stoffels, L., Giannakopoulos, S., Beckett, R., Leung, C., Ruiz, J., Cruz, M., & Parker, B. (2020). Robotic Extrusion of Algae‐Laden Hydrogels for Large‐Scale Applications. Global Challenges. https://doi.org/10.1002/gch2.201900064
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.