The DOI matches its Crossref record; 32 of the 32 references it cites were found in a registry or an index.
Fabrication of porous biodegradable polymer scaffolds using a solvent merging/particulate leaching method
Abstract
This study developed a solvent merging/par‐ ticulate leaching method for preparing three‐dimensional porous scaffolds. Poly(L‐lactic‐co‐glycolic acid) (PLGA) and sodium chloride particles were dry‐mixed and cast into a special mold, through which a liquid could pass due to a pressure difference. An organic solvent was then poured into the mold to dissolve and merge the PLGA particles under negative pressure. A nonsolvent was conducted into the PLGA/salt composite to solidify and precipitate the merged PLGA matrix. Finally, a large amount of water was passed through the mold to leach out the salt particles so as to create a porous structure. The results revealed that a highly porous three‐dimensional scaffold (>85 vol %) with a well interconnected porous structure could be achieved by this process. Porosity and the pore size of the scaffold were controlled using the ratio and the particle size of the added salt particles. A larger‐volume scaffold was produced using a larger mold. This work provides a continuous and simple procedure for fabricating a bulk three‐dimensional porous scaffold for tissue engineering. © 2001 Wiley Periodicals, Inc. J Biomed Mater Res 59: 676–681, 2002
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Langer, R., & Vacanti, J. P. (1993) · Science · doi:10.1126/science.8493529 · Cited by 9,893
Scaffolds in tissue engineering bone and cartilage
Hutmacher, D. W. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00121-6 · Cited by 4,994
Calcium Phosphate Ceramics as Hard Tissue Prosthetics
JARCHO, M. (1981) · Clinical Orthopaedics and Related Research · doi:10.1097/00003086-198106000-00037 · Cited by 2,014
Principles of Tissue Engineering
(2014) · Elsevier eBooks · doi:10.1016/c2011-0-07193-4 · Cited by 1,906
Athanasiou, K. A., Niederauer, G. G., & Agrawal, C. M. (1996) · Biomaterials · doi:10.1016/0142-9612(96)85754-1 · Cited by 1,497
Preparation and characterization of poly(l-lactic acid) foams
Mikos, A. G., Thorsen, A. J., Czerwonka, L. A., Bao, Y., Langer, R., Winslow, D. N., & Vacanti, J. P. (1994) · Polymer · doi:10.1016/0032-3861(94)90953-9 · Cited by 1,187
Mooney, D. J., Baldwin, D. F., Suh, N. P., Vacanti, J. P., & Langer, R. (1996) · Biomaterials · doi:10.1016/0142-9612(96)87284-x · Cited by 1,085
Neocartilage formation in vitro and in vivo using cells cultured on synthetic biodegradable polymers
Freed, L. E., Marquis, J. C., Nohria, A., Emmanual, J., Mikos, A. G., & Langer, R. (1993) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820270104 · Cited by 952
Biocompatibility of clinical implant materials
Williams, D. F. (1981) · CRC Press eBooks · Cited by 773
Laminated three-dimensional biodegradable foams for use in tissue engineering
Mikos, A. G., Sarakinos, G., Leite, S. M., Vacant, J. P., & Langer, R. (1993) · Biomaterials · doi:10.1016/0142-9612(93)90049-8 · Cited by 666
Porous biodegradable polymeric scaffolds prepared by thermally induced phase separation
Nam, Y. S., & Park, T. G. (1999) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(199910)47:1<8::aid-jbm2>3.0.co;2-l · Cited by 650
A novel method to fabricate bioabsorbable scaffolds
Whang, K., Thomas, C. H., Healy, K. E., & Nuber, G. (1995) · Polymer · doi:10.1016/0032-3861(95)93115-3 · Cited by 639
Application of porous ceramics for the attachment of load bearing internal orthopedic applications
Klawitter, J. J., & Hulbert, S. F. (1971) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820050613 · Cited by 634
Preparation of poly(glycolic acid) bonded fiber structures for cell attachment and transplantation
Mikos, A. G., Bao, Y., Cima, L. G., Ingber, D. E., Vacanti, J. P., & Langer, R. (1993) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820270207 · Cited by 606
Nam, Y. S., Yoon, J. J., & Park, T. G. (2000) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(2000)53:1<1::aid-jbm1>3.0.co;2-r · Cited by 577
Three-dimensional culture of rat calvarial osteoblasts in porous biodegradable polymers
Ishaug-Riley, S. L., Crane-Kruger, G. M., Yaszemski, M. J., & Mikos, A. G. (1998) · Biomaterials · doi:10.1016/s0142-9612(98)00021-0 · Cited by 496
Biomaterials : an interfacial approach
Hench, L. L., & Ethridge, E. C. (1982) · Academic Press eBooks · Cited by 487
Formation of highly porous biodegradable scaffolds for tissue engineering
Mikos, A. G., & Temenoff, J. S. (2000) · Electronic Journal of Biotechnology · doi:10.2225/vol3-issue2-fulltext-5 · Cited by 426
Hydroxyapatite fiber reinforced poly(α-hydroxy ester) foams for bone regeneration
Thomson, R. C., Yaszemski, M. J., Powers, J. M., & Mikos, A. G. (1998) · Biomaterials · doi:10.1016/s0142-9612(98)00097-0 · Cited by 409
Ceramic microstructures : property control by processing
Lee, W. E., & Rainforth, W. M. (1994) · Chapman & Hall eBooks · Cited by 361
Park, A., Wu, B., & Griffith, L. G. (1998) · Journal of Biomaterials Science, Polymer Edition · doi:10.1163/156856298x00451 · Cited by 322
Schugens, C., Maquet, V., Grandfils, C., Jerome, R., & Teyssie, P. (1996) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(199604)30:4<449::aid-jbm3>3.0.co;2-p · Cited by 316
Pore Morphology Effects on the Fibrovascular Tissue Growth in Porous Polymer Substrates
Wake, M. C., Patrick, C. W., & Mikos, A. G. (1994) · Cell Transplantation · doi:10.1177/096368979400300411 · Cited by 315
Ishaug-Riley, S. L., Crane, G. M., Gurlek, A., Miller, M. J., Yasko, A. W., Yaszemski, M. J., & Mikos, A. G. (1997) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(199707)36:1<1::aid-jbm1>3.0.co;2-p · Cited by 257
Macroporous polymer foams by hydrocarbon templating
Shastri, V. P., Martin, I., & Langer, R. (2000) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.97.5.1970 · Cited by 215
Poly(L-lactic acid) foams with cell seeding and controlled-release capacity
Lo, H., Kadiyala, S., Guggino, S. E., & Leong, K. W. (1996) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(199604)30:4<475::aid-jbm5>3.0.co;2-m · Cited by 177
Goldstein, A. S., Zhu, G. G., Morris, G. E., Meszlenyi, R. K., & Mikos, A. G. (1999) · Tissue Engineering · doi:10.1089/ten.1999.5.421 · Cited by 140
Synthesis and Properties of Biodegradable Polymers Used as Synthetic Matrices for Tissue Engineering
Wong, W. H., & Mooney, D. J. (1997) · Birkhäuser Boston eBooks · doi:10.1007/978-1-4612-4154-6_4 · Cited by 123
van de Witte, P., Esselbrugge, H., Dijkstra, P. J., van den Berg, J. W. A., & Feijén, J. (1996) · Journal of Membrane Science · doi:10.1016/0376-7388(95)00068-2 · Cited by 69
Zoppi, R. A., Contant, S., Duek, E. A. D. R., Marques, F. R., Wada, M. L. F., & Nunes, S. P. (1999) · Polymer · doi:10.1016/s0032-3861(98)00562-x · Cited by 65
van de Witte, P., Esselbrugge, H., Dijkstra, P. J., van den Berg, J. W. A., & Feijén, J. (1996) · Journal of Polymer Science Part B Polymer Physics · Cited by 44
(1999) · doi:10.1002/(sici)1097-4636(1999)48:5<602::aid-jbm3>3.0.co;2-6
Cited by
Bone Tissue Engineering: State of the Art and Future Trends
Salgado, A. J., Coutinho, O. P., & Reis, R. L. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200400026 · Cited by 1,681
Polymeric Scaffolds for Bone Tissue Engineering
Liu, X., & Ma, P. X. (2004) · Annals of Biomedical Engineering · doi:10.1023/b:abme.0000017544.36001.8e · Cited by 1,345
3D bioactive composite scaffolds for bone tissue engineering
Turnbull, G., Clarke, J., Picard, F., Riches, P., Jia, L., Han, F., Li, B., & Shu, W. (2018) · Bioactive Materials · doi:10.1016/j.bioactmat.2017.10.001 · Cited by 1,332
Three-dimensional aqueous-derived biomaterial scaffolds from silk fibroin
Kim, U.-J., Park, J., Joo Kim, H., Wada, M., & Kaplan, D. L. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.07.044 · Cited by 979
Taboas, J. M., Maddox, R. D., Krebsbach, P. H., & Hollister, S. J. (2003) · Biomaterials · doi:10.1016/s0142-9612(02)00276-4 · Cited by 691
Metadata
- Authors
- Liao, C., Chen, C., Chen, J., Chiang, S., Lin, Y., & Chang, K.
- Venue
- Journal of Biomedical Materials Research
- Publisher
- Wiley
- Published
- 2001-12-12
- Volume
- 59
- Issue
- 4
- Pages
- 676-681
- ISSN
- 0021-9304 (ISSN-L)
- 1097-4636
- OpenAlex
- W2143035084
- Cited by
- 283
- References
- 32
- FWCI
- 3.70
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.