Resorbable defect analog PLGA scaffolds using CO2 as solvent: Structural characterization
The DOI matches its Crossref record.
Abstract
After tooth extraction, the immediate wound treatment by implanting an exact copy of the root could prevent alveolar bone atrophy. The implant should have an interconnected porosity in order to promote tissue in‐growth. This communication reports a novel method to realize such net‐shaped porous scaffolds fabricated within a few minutes. Porosity and micro‐architecture are evaluated by Hg‐porosimetry and by image analysis of electron and light microscopy as well as by computed micro‐tomography. The total porosity of the scaffold corresponds to (63 ± 3)%, mainly related to open interconnected porosity. Micro‐tomography, as a noninvasive 3D method, is best suited to uncover pores of about 100 μm, a diameter especially important for tissue in‐growth. The differentiation between open and closed porosity, however, depends on the method chosen. This effect is attributed to the spherical pores with an orifice only detected in the 3D analysis. Consequently, the closed porosity is overestimated by 8% evaluating 2D images. Finally, the mean pore diameter is found to be 106 and 100 μm for 2D and 3D analysis, respectively. Although the porosity of the scaffold needs to be further optimized for clinical applications, the procedure proposed is a promising route in manufacturing open porous implants without the use of any organic solvent. © 2002 Wiley Periodicals, Inc. J Biomed Mater Res 62: 89–98, 2002
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Porosity of 3D biomaterial scaffolds and osteogenesis
Karageorgiou, V., & Kaplan, D. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.02.002 · Cited by 6,622
Three-Dimensional Scaffolds for Tissue Engineering Applications: Role of Porosity and Pore Size
Loh, Q. L., & Choong, C. (2013) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2012.0437 · Cited by 2,668
Recent Developments in Ring Opening Polymerization of Lactones for Biomedical Applications
Albertsson, A.-C., & Varma, I. K. (2003) · Biomacromolecules · doi:10.1021/bm034247a · Cited by 1,582
Karande, T. S., Ong, J. L., & Agrawal, C. M. (2004) · Annals of Biomedical Engineering · doi:10.1007/s10439-004-7825-2 · Cited by 457
Design of artificial extracellular matrices for tissue engineering
Kim, B.-S., Park, I.-K., Hoshiba, T., Jiang, H.-L., Choi, Y.-J., Akaike, T., & Cho, C.-S. (2011) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.10.001 · Cited by 296
Cui, C., Wang, X., Yi, Z., Yang, B., Wang, X., Chen, X., Liu, J., & Yang, C. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b17585 · Cited by 134
Processing of Materials for Regenerative Medicine Using Supercritical Fluid Technology
García-González, C. A., Concheiro, A., & Alvarez-Lorenzo, C. (2015) · Bioconjugate Chemistry · doi:10.1021/bc5005922 · Cited by 112
Metadata
- Authors
- Maspero, F. A., Ruffieux, K., Müller, B., & Wintermantel, E.
- Venue
- Journal of Biomedical Materials Research
- Publisher
- Wiley
- Published
- 2002-06-20
- Volume
- 62
- Issue
- 1
- Pages
- 89-98
- ISSN
- 0021-9304 (ISSN-L)
- 1097-4636
- OpenAlex
- W2061551016
- Cited by
- 77
- References
- 0
- FWCI
- 2.59
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.