The DOI matches its Crossref record; 24 of the 24 references it cites were found in a registry or an index.
Solutions able to reproduce in vivo surface‐structure changes in bioactive glass‐ceramic A‐W3
Abstract
High‐strength bioactive glass‐ceramic A‐W was soaked in various acellular aqueous solutions different in ion concentrations and pH. After soaking for 7 and 30 days, surface structural changes of the glassceramic were investigated by means of Fourier transform infrared reflection spectroscopy, thin‐film x‐ray diffraction, and scanning electronmicroscopic observation, in comparison with in vivo surface structural changes. So‐called Tris buffer solution, pure water buffered with trishydroxymethyl‐aminomethane, which had been used by various workers as a “simulated body fluid,” did not reproduce the in vivo surface structural changes, i.e., apatite formation on the surface. A solution, ion concentrations and pH of which are almost equal to those of the human blood plasma—i.e., Na+ 142.0, K+ 5.0, Mg 2+ 1.5, Ca 2+ 2.5, Cl− 148.8, HCO 3− 4.2 and PO 42− 1.0 mM and buffered at pH 7.25 with the trishydroxymethylaminomethane–most precisely reproduced in vivo surface structure change. This shows that careful selection of simulated body fluid is required for in vitro experiments. The results also support the concept that the apatite phase on the surface of glass‐ceramic A‐W is formed by a chemical reaction of the glass‐ceramic with the Ca 2+, HPO 42−, and OH− ions in the body fluid.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
THE CHEMICAL DYNAMICS OF BONE MINERAL
NEUMAN, W. F., & NEUMAN, M. W. (1959) · The American Journal Of The Medical Sciences · doi:10.1097/00000441-195912000-00030 · Cited by 1,032
Hench, L. L., & Wilson, J. (1984) · Science · doi:10.1126/science.6093253 · Cited by 982
Ca, P‐rich layer formed on high‐strength bioactive glass‐ceramic A‐W
Kokubo, T., Ito, S., Huang, Z. T., Hayashi, T., Sakka, S., Kitsugi, T., & Yamamuro, T. (1990) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820240306 · Cited by 859
Self-citationThe chemical dynamics of bone mineral.
Neuman, W. F., & Neuman, M. W. (1958) · Cited by 710
Chemical anatomy, physiology and pathology of extracellular fluid
Gamble, J. L. (1954) · University Microfilms International eBooks · Cited by 579
A new glass‐ceramic for bone replacement: Evaluation of its bonding to bone tissue
Nakamura, T., Yamamuro, T., Higashi, S., Kokubo, T., & Itoo, S. (1985) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820190608 · Cited by 441
Self-citationFormation of a high-strength bioactive glass-ceramic in the system MgO-CaO-SiO2-P2O5
Kokubo, T., Ito, S., Sakka, S., & Yamamuro, T. (1986) · Journal of Materials Science · doi:10.1007/bf01145520 · Cited by 351
Self-citationBioceramics: material characteristics versus in vivo behavior.
Ducheyne, P. (1987) · PubMed · Cited by 323
Fundamental aspects of biocompatibility
Williams, D. F. (1981) · CRC Press eBooks · Cited by 301
Compositional dependence of the formation of calcium phosphate films on bioglass
Ogino, M., Ohuchi, F. S., & Hench, L. L. (1980) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820140107 · Cited by 281
Cited by
Items 401–500 of 1,000
Kim, H.-M., Kishimoto, K., Miyaji, F., Kokubo, T., Yao, T., Suetsugu, Y., Tanaka, J., & Nakamura, T. (2000) · Journal of Materials Science Materials in Medicine · doi:10.1023/a:1008935924847 · Cited by 116
Self-citationCui, W., Beniash, E., Gawalt, E. S., Xu, Z., & Sfeir, C. S. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.06.031 · Cited by 115
Ma, J., Chen, C. Z., Wang, D. G., Jiao, Y., & Shi, J. Z. (2010) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2010.06.022 · Cited by 115
Xiong, J., Li, Y., Wang, X., Hodgson, P. D., & Wen, C. (2008) · Acta Biomaterialia · doi:10.1016/j.actbio.2008.04.022 · Cited by 115
On the bioactivity of silicate glass
Andersson, Ö., & Karlsson, K. H. (1991) · Journal of Non-Crystalline Solids · doi:10.1016/0022-3093(91)90090-s · Cited by 115
Ballarre, J., Manjubala, I., Schreiner, W. H., Orellano, J. C., Fratzl, P., & Ceré, S. (2009) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.10.015 · Cited by 114
Development of bioactive materials based on surface chemistry
Kokubo, T., Matsushita, T., Takadama, H., & Kizuki, T. (2008) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2008.08.004 · Cited by 114
Self-citationLinati, L., Lusvardi, G., Malavasi, G., Menabue, L., Menziani, M. C., Mustarelli, P., & Segre, U. (2005) · The Journal of Physical Chemistry B · doi:10.1021/jp046631n · Cited by 114
Cauda, V., Mühlstein, L., Onida, B., & Bein, T. (2008) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2008.09.022 · Cited by 114
Luminescence Functionalization of SBA-15 by YVO4:Eu3+ as a Novel Drug Delivery System
Yang, P., Huang, S., Kong, D., Lin, J., & Fu, H. (2007) · Inorganic Chemistry · doi:10.1021/ic0622959 · Cited by 113
The preparation, cytocompatibility, and in vitro biodegradation study of pure β-TCP on magnesium
Geng, F., Tan, L., Jin, X., Yang, J., & Yang, K. (2009) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-008-3669-x · Cited by 113
Biomimetic deposition of apatite coating on surface-modified NiTi alloy
Gu, Y., Tay, B. Y., Lim, C. S., & Yong, M. S. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.04.051 · Cited by 113
Chen, F., Lam, W. M., Lin, C., Qiu, G., Wu, Z., Luk, K., & Lu, W. W. (2006) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.30720 · Cited by 113
Bioactive Ceramics: Challenges and Perspectives.
Kim, H. (2001) · Journal of the Ceramic Society of Japan · doi:10.2109/jcersj.109.1268_s49 · Cited by 113
Bone-like apatite formation on HA/316L stainless steel composite surface in simulated body fluid
Xin, F. A. N., Jian, C. H. E. N., Zou, J., Qian, W. A. N., Zhou, Z.-C., & Ruan, J. (2009) · Transactions of Nonferrous Metals Society of China · doi:10.1016/s1003-6326(08)60276-9 · Cited by 112
The processing, mechanical properties and bioactivity of zinc based glass ionomer cements
Boyd, D., & Towler, M. R. (2005) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-005-3578-1 · Cited by 112
Gao, Y., Yerokhin, A. L., Парфенов, Е. В., & Matthews, A. (2014) · Electrochimica Acta · doi:10.1016/j.electacta.2014.10.063 · Cited by 112
Macroporous bioactive glass-ceramic scaffolds for tissue engineering
Vitale‐Brovarone, C., Verné, E., & Appendino, P. M. (2006) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-006-0533-8 · Cited by 112
Use of sol–gel‐derived titania coating for direct soft tissue attachment
Areva, S., Paldan, H., Peltola, T., Närhi, T. O., Jokinen, M., & Lindén, M. (2004) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.20120 · Cited by 112
Araujo, J. V., Martins, A. M., Leonor, I. B., Pinho, E. D., Reis, R. L., & Neves, N. M. (2008) · Journal of Biomaterials Science Polymer Edition · doi:10.1163/156856208786052335 · Cited by 111
Design, characterization and preliminary biological evaluation of new lignin-PLA biocomposites
Spiridon, I., & Tanase, C. E. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.03.140 · Cited by 111
Ballarre, J., Aydemir, T., Liverani, L., Roether, J. A., Goldmann, W. H., & Boccaccini, A. R. (2019) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2019.125138 · Cited by 111
Hydrothermal preparation of fibrous apatite and apatite sheet
Ioku, K. (2002) · Solid State Ionics · doi:10.1016/s0167-2738(02)00593-3 · Cited by 111
Bio‐Inspired Synthesis of Minerals for Energy, Environment, and Medicinal Applications
Kim, S., & Park, C. B. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201201994 · Cited by 111
Influence of SrO substitution for CaO on the properties of bioactive glass S53P4
Massera, J., & Hupa, L. (2013) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-013-5120-1 · Cited by 111
Characterization and in vitro Bioactivity of Zinc-containing Bioactive Glass and Glass-ceramics
Du, R. L., Chang, J., Ni, S. Y., Zhai, W. Y., & Wang, J. Y. (2006) · Journal of Biomaterials Applications · doi:10.1177/0885328206054535 · Cited by 111
A self-setting TTCP-DCPD apatite cement for release of vancomycin
Hamanishi, C., Kitamoto, K., Tanaka, S., Otsuka, M., Doi, Y., & Kitahashi, T. (1996) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(199623)33:3<139::aid-jbm3>3.0.co;2-r · Cited by 111
Knabe, C., Driessens, F. C. M., Planell, J. A., Gildenhaar, R., Berger, G., Reif, D., Fitzner, R., Radlanski, R. J., & Gross, U. (2000) · Journal of Biomedical Materials Research · doi:10.1002/1097-4636(20001205)52:3<498::aid-jbm8>3.0.co;2-p · Cited by 110
Porous polymer/bioactive glass composites for soft‐to‐hard tissue interfaces
Zhang, K., Ma, Y., & Francis, L. F. (2002) · Journal of Biomedical Materials Research · doi:10.1002/jbm.10227 · Cited by 110
Moghanian, A., Sedghi, A., Ghorbanoghli, A., & Salari, E. (2018) · Ceramics International · doi:10.1016/j.ceramint.2018.02.159 · Cited by 109
Washio, A., Morotomi, T., Yoshii, S., & Kitamura, C. (2019) · Materials · doi:10.3390/ma12233967 · Cited by 109
Formation of a bioactive graded surface structure on Ti–15Mo–5Zr–3Al alloy by chemical treatment
Kim, H.-M., Takadama, H., Kokubo, T., Nishiguchi, S., & Nakamura, T. (2000) · Biomaterials · doi:10.1016/s0142-9612(99)00190-8 · Cited by 109
Self-citationOliveira, A. L., Mano, J. F., & Reis, R. L. (2003) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2003.10.009 · Cited by 109
Hydroxyapatite nanopowders: Synthesis, densification and cell–materials interaction
Banerjee, A., Bandyopadhyay, A. K., & Bose, S. (2006) · Materials Science and Engineering C · doi:10.1016/j.msec.2006.07.010 · Cited by 108
Calcium phosphate composite layers for surface-mediated gene transfer
Oyane, A., Wang, X., Sogo, Y., Ito, A., & Tsurushima, H. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.02.003 · Cited by 108
Biocompatible silk/calcium silicate/sodium alginate composite scaffolds for bone tissue engineering
Zheng, A., Cao, L., Liu, Y., Wu, J., Zeng, D., Hu, L., Zhang, X., & Jiang, X. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.06.093 · Cited by 108
Suzuki, O., Shiwaku, Y., & Hamai, R. (2020) · Dental Materials Journal · doi:10.4012/dmj.2020-001 · Cited by 107
Bioactive Glass Nanoparticles for Tissue Regeneration
Pajares‐Chamorro, N., & Chatzistavrou, X. (2020) · ACS Omega · doi:10.1021/acsomega.0c00180 · Cited by 107
Bioactivity in ordered mesoporous materials
Horcajada, P., Ramila, A., Boulahya, K., González-Calbet, J. M., & Vallet‐Regí, M. (2004) · Solid State Sciences · doi:10.1016/j.solidstatesciences.2004.07.026 · Cited by 107
Dip coated silicon-substituted hydroxyapatite films
Hijón, N., Cabañas, M. V., Peña, J., & Vallet‐Regí, M. (2006) · Acta Biomaterialia · doi:10.1016/j.actbio.2006.05.004 · Cited by 107
Nano-biosupercapacitors enable autarkic sensor operation in blood
Lee, Y., Bandari, V. K., Li, Z. Y., Medina‐Sánchez, M., Maitz, M. F., Karnaushenko, D., Tsurkan, M. V., Karnaushenko, D. D., & Schmidt, O. G. (2021) · Nature Communications · doi:10.1038/s41467-021-24863-6 · Cited by 106
Yusoff, M. F. M., Kadir, M. R. A., Iqbal, N., Hassan, M. A., & Hussain, R. (2014) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2014.02.048 · Cited by 106
Ceramic bioactivity: progresses, challenges and perspectives
Lee, K.-Y., Park, M., Kim, H.-M., Lim, Y., Chun, H.-J., Kim, H., & Moon, S.-H. (2006) · Biomedical Materials · doi:10.1088/1748-6041/1/2/r01 · Cited by 106
Shangguan, Y.-Y., Wang, Y.-W., Wu, Q., & Chen, G. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.11.024 · Cited by 106
In vitro bioactivity and degradation of polycaprolactone composites containing silicate fillers
Chouzouri, G., & Xanthos, M. (2007) · Acta Biomaterialia · doi:10.1016/j.actbio.2007.01.005 · Cited by 106
Following bioactive glass behavior beyond melting temperature by thermal and optical methods
Chatzistavrou, X., Zorba, T., Kontonasaki, E., Chrissafis, K., Koidis, P. T., & Paraskevopoulos, K. (2004) · physica status solidi (a) · doi:10.1002/pssa.200306776 · Cited by 106
García, A., Cicuéndez, M., Izquierdo‐Barba, I., Arcos, D., & Vallet‐Regí, M. (2009) · Chemistry of Materials · doi:10.1021/cm9022776 · Cited by 106
Sroka‐Bartnicka, A., Borkowski, L., Ginalska, G., Slosarczyk, A., & Kazarian, S. G. (2016) · Spectrochimica Acta Part A Molecular and Biomolecular Spectroscopy · doi:10.1016/j.saa.2016.07.051 · Cited by 106
Carbon Nanotubes and Graphene as Nanoreinforcements in Metallic Biomaterials: a Review
Munir, K. S., Wen, C., & Li, Y. (2019) · Advanced Biosystems · doi:10.1002/adbi.201800212 · Cited by 106
Biological control of apatite growth in simulated body fluid and human blood serum
Juhasz, J. A., Best, S. M., Auffret, A. D., & Bonfield, W. (2007) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-007-3344-7 · Cited by 105
Fujibayashi, S., Takemoto, M., Neo, M., Matsushita, T., Kokubo, T., Doi, K., Ito, T., Shimizu, A., & Nakamura, T. (2011) · European Spine Journal · doi:10.1007/s00586-011-1728-3 · Cited by 105
Self-citationFunctionalizing Mesoporous Bioglasses for Long‐Term Anti‐Osteoporotic Drug Delivery
López‐Noriega, A., Arcos, D., & Vallet‐Regí, M. (2010) · Chemistry - A European Journal · doi:10.1002/chem.201000137 · Cited by 105
Sol–gel coatings for protection and bioactivation of metals used in orthopaedic devices
Durán, A., Conde, A., Coedo, A. G., Dorado, T., García, C., & Ceré, S. (2004) · Journal of Materials Chemistry · doi:10.1039/b401370k · Cited by 105
Kitsugi, T., Nakamura, T., Oka, M., Yan, W., Goto, T., Shibuya, T., Kokubo, T., & Miyaji, S. (1996) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(199610)32:2<149::aid-jbm1>3.0.co;2-t · Cited by 105
Self-citationYang, X., Zhang, L., Chen, X., Sun, X., Yang, G., Guo, X., Yang, H., Gao, C., & Gou, Z. (2012) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2012.02.005 · Cited by 104
Bioactive Glasses in Dentistry: A Review
Za, A., Bahrololoom, M. E., Shariat, M. H., Bagheri, R., & Bagheri, R. (2015) · DOAJ (DOAJ: Directory of Open Access Journals) · Cited by 104
In situ pH within particle beds of bioactive glasses
Zhang, D., Hupa, M. M., & Hupa, L. (2008) · Acta Biomaterialia · doi:10.1016/j.actbio.2008.04.007 · Cited by 104
Elomaa, L., Kokkari, A. K., Närhi, T. O., & Seppälä, J. V. (2012) · Composites Science and Technology · doi:10.1016/j.compscitech.2012.10.014 · Cited by 104
Electrically polarized HAp-coated Ti: In vitro bone cell–material interactions
Bodhak, S., Bose, S., & Bandyopadhyay, A. K. (2009) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.08.008 · Cited by 103
Bioactivity of CaO·SiO2 glasses added with various ions
Ohura, K., Nakamura, T., Yamamuro, T., Ebisawa, Y., Kokubo, T., Kotoura, Y., & Oka, M. (1992) · Journal of Materials Science Materials in Medicine · doi:10.1007/bf00705275 · Cited by 103
Self-citationRhee, S. (2003) · Biomaterials · doi:10.1016/j.biomaterials.2003.08.004 · Cited by 102
Novel sol gel coating of Nb2O5 on magnesium alloy for biomedical applications
Amaravathy, P., Sampath, S., Sathyanarayanan, S., & Rajendran, N. (2014) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2014.01.050 · Cited by 102
Gu, L.-S., Kim, Y. K., Liu, Y., Takahashi, K., Arun, S. N., Wimmer, C. E., Osorio, R., Ling, J.-Q., Looney, S. W., Pashley, D. H., et al. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.07.036 · Cited by 102
Biological evaluation of an apatite–mullite glass-ceramic produced via selective laser sintering
Goodridge, R., Wood, D. J., Ohtsuki, C., & Dalgarno, K. W. (2007) · Acta Biomaterialia · doi:10.1016/j.actbio.2006.10.005 · Cited by 102
Antimicrobial particulate silver coatings on stainless steel implants for fracture management
DeVasConCellos, P. D., Bose, S., Beyenal, H., Bandyopadhyay, A. K., & Zirkle, L. G. (2012) · Materials Science and Engineering C · doi:10.1016/j.msec.2012.02.020 · Cited by 102
Analysis of surface layers on bioactive glasses
Rehman, I. U., Hench, L. L., Bonfield, W., & Smith, R. (1994) · Biomaterials · doi:10.1016/0142-9612(94)90044-2 · Cited by 102
Early stage reactivity and in vitro behavior of silica-based bioactive glasses and glass-ceramics
Verné, E., Bretcanu, O., Balagna, C., Bianchi, C. L., Cannas, M. F., Gatti, S., & Vitale‐Brovarone, C. (2008) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-008-3537-8 · Cited by 101
Hydroxyapatite ceramic bodies with tailored mechanical properties for different applications
Rodríguez-Lorenzo, L. M., Vallet‐Regí, M., Ferreira, J. M. F., Ginebra, M., Aparicio, C., & Planell, J. A. (2002) · Journal of Biomedical Materials Research · doi:10.1002/jbm.1286 · Cited by 101
Mohn, D., Zehnder, M., Imfeld, T. N., & Stark, W. J. (2010) · International Endodontic Journal · doi:10.1111/j.1365-2591.2009.01660.x · Cited by 101
Hurley, K. R., Ring, H. L., Etheridge, M. L., Zhang, J., Gao, Z., Shao, Q., Klein, N. D., Szlag, V. M., Chung, C. M., Reineke, T. M., et al. (2016) · Molecular Pharmaceutics · doi:10.1021/acs.molpharmaceut.5b00866 · Cited by 101
Chen, Q., Miyata, N., Kokubo, T., & Nakamura, T. (2000) · Journal of Biomedical Materials Research · doi:10.1002/1097-4636(20000915)51:4<605::aid-jbm8>3.0.co;2-u · Cited by 101
Self-citationSurface and Chemical Study of SiO2·P2O5·CaO·(MgO) Bioactive Glasses
Pérez‐Pariente, J., Balas, F., & Vallet‐Regí, M. (2000) · Chemistry of Materials · doi:10.1021/cm9911114 · Cited by 101
El‐Ghannam, A., Hamazawy, E., & Yehia, A. (2001) · Journal of Biomedical Materials Research · doi:10.1002/1097-4636(20010605)55:3<387::aid-jbm1027>3.0.co;2-v · Cited by 100
Biocompatible glass–ceramic materials for bone substitution
Vitale‐Brovarone, C., Verné, E., Robiglio, L., Martinasso, G., Canuto, R. A., & Muzio, G. (2007) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-006-0111-0 · Cited by 100
In vitro stability of SBA-15 under physiological conditions
Izquierdo‐Barba, I., Colilla, M., Manzano, M., & Vallet‐Regí, M. (2010) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2010.03.025 · Cited by 100
Ma, J., Chen, C. Z., Wang, D. G., & Hu, J. (2011) · Ceramics International · doi:10.1016/j.ceramint.2011.01.043 · Cited by 100
Strontium‐substituted apatite coating grown on Ti6Al4V substrate through biomimetic synthesis
Oliveira, A. L., Reis, R. L., & Li, P. (2007) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.30791 · Cited by 100
Behavior in simulated body fluid of calcium phosphate coatings obtained by laser ablation
Clèries, L., Fernández-Pradas, J. M., & Morenza, J. L. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00060-0 · Cited by 100
Cho, S.-B., Nakanishi, K., Kokubo, T., Soga, N., Ohtsuki, C., & Nakamura, T. (1996) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(199623)33:3<145::aid-jbm4>3.0.co;2-q · Cited by 100
Self-citationYagüe, C., Moros, M., Grazú, V., Arruebo, M., & Santamaría, J. (2007) · Chemical Engineering Journal · doi:10.1016/j.cej.2007.07.088 · Cited by 99
Physico-chemical and in vitro biological evaluation of strontium/calcium silicophosphate glass
Hesaraki, S., Alizadeh, M., Nazarian, H., & Sharifi, D. (2009) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-009-3920-0 · Cited by 99
Edén, M. (2021) · Materialia · doi:10.1016/j.mtla.2021.101107 · Cited by 98
Synthesis of bioactive class II poly(γ-glutamic acid)/silica hybrids for bone regeneration
Poologasundarampillai, G., Ionescu, C., Tsigkou, O., Murugesan, M., Hill, R. G., Stevens, M. M., Hanna, J. V., Smith, M. E., & Jones, J. R. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm00930j · Cited by 98
Lin, F., Hsu, Y.-S., Lin, S., & Sun, J. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00154-0 · Cited by 98
Apatite-forming ability of CaO-containing titania
Wei, M., Uchida, M., Kim, H., Kokubo, T., & Nakamura, T. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00092-8 · Cited by 98
Self-citationIn vitro bioactivity and biocompatibility of lithium substituted 45S5 bioglass
Khorami, M., Hesaraki, S., Behnamghader, A., Nazarian, H., & Shahrabi, S. S. (2011) · Materials Science and Engineering C · doi:10.1016/j.msec.2011.07.011 · Cited by 98
Sakai, S., Anada, T., Tsuchiya, K., Yamazaki, H., Margolis, H. C., & Suzuki, O. (2016) · Dental Materials Journal · doi:10.4012/dmj.2015-255 · Cited by 98
Apatite-Forming Ability of Niobium Oxide Gels in a Simulated Body Fluid.
Miyazaki, T., Kim, H., Kokubo, T., Ohtsuki, C., & Nakamura, T. (2001) · Journal of the Ceramic Society of Japan · doi:10.2109/jcersj.109.1275_929 · Cited by 98
Self-citationKaur, G., Pickrell, G., Kimsawatde, G. C., Homa, D., Allbee, H. A., & Sriranganathan, N. (2014) · Scientific Reports · doi:10.1038/srep04392 · Cited by 97
Enhanced osteoconductivity of sodium‐substituted hydroxyapatite by system instability
Cho, J. S., Um, S., Yoo, D. S., Chung, Y., Chung, S. H., Lee, J.-C., & Rhee, S. (2013) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.33087 · Cited by 97
Azami, M., Jalili‐Firoozinezhad, S., Mozafari, M., & Rabiee, M. (2011) · Ceramics International · doi:10.1016/j.ceramint.2011.02.025 · Cited by 97
Thian, E. S., Huang, J., Best, S. M., Barber, Z. H., & Bonfield, W. (2005) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.30368 · Cited by 97
Kundu, B., Soundrapandian, C., Nandi, S. K., Mukherjee, P., Dandapat, N., Roy, S., Datta, B. K., Mandal, T. K., Basu, D., & Bhattacharya, R. (2010) · Pharmaceutical Research · doi:10.1007/s11095-010-0166-y · Cited by 97
Mathew, R., Gunawidjaja, P. N., Izquierdo‐Barba, I., Jansson, K., García, A., Arcos, D., Vallet‐Regí, M., & Edén, M. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp206237n · Cited by 97
Huang, S., Yang, P., Cheng, Z., Li, C., Fan, Y., Kong, D., & Lin, J. (2008) · The Journal of Physical Chemistry C · doi:10.1021/jp800363s · Cited by 97
Bioactive and Biomimetic Restorative Materials: A Comprehensive Review. Part I
Jefferies, S. R. (2013) · Journal of Esthetic and Restorative Dentistry · doi:10.1111/jerd.12069 · Cited by 96
Structural, optical and bioactive properties of calcium borosilicate glasses
Singh, K., Bala, I., & Kumar, V. R. (2009) · Ceramics International · doi:10.1016/j.ceramint.2009.06.006 · Cited by 96
Controlled Delivery of Gentamicin Using Poly(3-hydroxybutyrate) Microspheres
Francis, L., Meng, D., Knowles, J. C., Keshavarz, T., Boccaccini, A. R., & Roy, I. (2011) · International Journal of Molecular Sciences · doi:10.3390/ijms12074294 · Cited by 96
Oliveira, J. M., Silva, S. S., Malafaya, P. B., Rodrigues, M. T., Kotobuki, N., Hirose, M., Gomes, M. E., Mano, J. F., Ohgushi, H., & Reis, R. L. (2008) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32213 · Cited by 96
Yugeswaran, S., Yoganand, C. P., Kobayashi, A., Paraskevopoulos, K., & Subramanian, B. (2011) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2011.11.002 · Cited by 96
Metadata
- Authors
- Kokubo, T., Kushitani, H., Sakka, S., Kitsugi, T., & Yamamuro, T.
- Venue
- Journal of Biomedical Materials Research
- Publisher
- Wiley
- Published
- 1990-06
- Volume
- 24
- Issue
- 6
- Pages
- 721-734
- ISSN
- 0021-9304 (ISSN-L)
- 1097-4636
- OpenAlex
- W2099108227
- Cited by
- 3,836
- References
- 24
- FWCI
- 11.60
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.