The DOI matches its Crossref record; 24 of the 24 references it cites were found in a registry or an index.
Solutions able to reproduce in vivo surface‐structure changes in bioactive glass‐ceramic A‐W3
Abstract
High‐strength bioactive glass‐ceramic A‐W was soaked in various acellular aqueous solutions different in ion concentrations and pH. After soaking for 7 and 30 days, surface structural changes of the glassceramic were investigated by means of Fourier transform infrared reflection spectroscopy, thin‐film x‐ray diffraction, and scanning electronmicroscopic observation, in comparison with in vivo surface structural changes. So‐called Tris buffer solution, pure water buffered with trishydroxymethyl‐aminomethane, which had been used by various workers as a “simulated body fluid,” did not reproduce the in vivo surface structural changes, i.e., apatite formation on the surface. A solution, ion concentrations and pH of which are almost equal to those of the human blood plasma—i.e., Na+ 142.0, K+ 5.0, Mg 2+ 1.5, Ca 2+ 2.5, Cl− 148.8, HCO 3− 4.2 and PO 42− 1.0 mM and buffered at pH 7.25 with the trishydroxymethylaminomethane–most precisely reproduced in vivo surface structure change. This shows that careful selection of simulated body fluid is required for in vitro experiments. The results also support the concept that the apatite phase on the surface of glass‐ceramic A‐W is formed by a chemical reaction of the glass‐ceramic with the Ca 2+, HPO 42−, and OH− ions in the body fluid.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
THE CHEMICAL DYNAMICS OF BONE MINERAL
NEUMAN, W. F., & NEUMAN, M. W. (1959) · The American Journal Of The Medical Sciences · doi:10.1097/00000441-195912000-00030 · Cited by 1,032
Hench, L. L., & Wilson, J. (1984) · Science · doi:10.1126/science.6093253 · Cited by 982
Ca, P‐rich layer formed on high‐strength bioactive glass‐ceramic A‐W
Kokubo, T., Ito, S., Huang, Z. T., Hayashi, T., Sakka, S., Kitsugi, T., & Yamamuro, T. (1990) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820240306 · Cited by 859
Self-citationThe chemical dynamics of bone mineral.
Neuman, W. F., & Neuman, M. W. (1958) · Cited by 710
Chemical anatomy, physiology and pathology of extracellular fluid
Gamble, J. L. (1954) · University Microfilms International eBooks · Cited by 579
A new glass‐ceramic for bone replacement: Evaluation of its bonding to bone tissue
Nakamura, T., Yamamuro, T., Higashi, S., Kokubo, T., & Itoo, S. (1985) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820190608 · Cited by 441
Self-citationFormation of a high-strength bioactive glass-ceramic in the system MgO-CaO-SiO2-P2O5
Kokubo, T., Ito, S., Sakka, S., & Yamamuro, T. (1986) · Journal of Materials Science · doi:10.1007/bf01145520 · Cited by 351
Self-citationBioceramics: material characteristics versus in vivo behavior.
Ducheyne, P. (1987) · PubMed · Cited by 323
Fundamental aspects of biocompatibility
Williams, D. F. (1981) · CRC Press eBooks · Cited by 301
Compositional dependence of the formation of calcium phosphate films on bioglass
Ogino, M., Ohuchi, F. S., & Hench, L. L. (1980) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820140107 · Cited by 281
Cited by
Items 701–800 of 1,000
Li, X., John, J. S., Coffer, J. L., Chen, Y., Pinizzotto, R. F., Newey, J., Reeves, C. L., & Canham, L. (2000) · Biomedical Microdevices · doi:10.1023/a:1009951121205 · Cited by 74
The fluorapatite–anorthite system in biomedicine
Agathopoulos, S., Tulyaganov, D. U., Marques, P. A. A. P., Ferro, M. C., Fernandes, M. H. V., & Correia, R. N. (2003) · Biomaterials · doi:10.1016/s0142-9612(02)00468-4 · Cited by 74
Significance of melt-fraction in HVOF sprayed hydroxyapatite particles, splats and coatings
Khor, K. A., Li, H., & Cheang, P. (2003) · Biomaterials · doi:10.1016/j.biomaterials.2003.08.008 · Cited by 74
Miyazaki, T., Ohtsuki, C., Kyomoto, M., Tanihara, M., Mori, A., & KURAMOTO, K. (2003) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.20042 · Cited by 74
Catauro, M., Bollino, F., Veronesi, P., & Lamanna, G. (2014) · Materials Science and Engineering C · doi:10.1016/j.msec.2014.03.025 · Cited by 73
Mukherjee, S., Kundu, B., Sen, S., & Chanda, A. (2013) · Ceramics International · doi:10.1016/j.ceramint.2013.10.158 · Cited by 73
Bone response to biomimetic implants delivering BMP-2 and VEGF: An immunohistochemical study
Ramazanoğlu, M., Lutz, R., Rusche, P., Trabzon, L., Köse, G. T., Prechtl, C., & Schlegel, K. A. (2013) · Journal of Cranio-Maxillofacial Surgery · doi:10.1016/j.jcms.2013.01.037 · Cited by 73
Phase composition and in vitro bioactivity of porous implants made of bioactive glass S53P4
Fagerlund, S., Massera, J., Moritz, N., Hupa, L., & Hupa, M. M. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.03.011 · Cited by 73
Santillán, M. J., QUARANTA, N. E., & Boccaccini, A. R. (2010) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2010.10.001 · Cited by 73
Bioactive composites for bone tissue engineering
Tanner, K. E. (2010) · Proceedings of the Institution of Mechanical Engineers Part H Journal of Engineering in Medicine · doi:10.1243/09544119jeim823 · Cited by 73
Formation of bone-like apatite on poly(L-lactic acid) fibers by a biomimetic process
Yuan, X., Mak, A. F. T., & Li, J. (2001) · Journal of Biomedical Materials Research · doi:10.1002/1097-4636(200110)57:1<140::aid-jbm1153>3.0.co;2-g · Cited by 73
Yu, Y., & Edén, M. (2016) · RSC Advances · doi:10.1039/c6ra15275a · Cited by 73
Clupper, D. C., Gough, J. E., Embanga, P., Notingher, I., Hench, L. L., & Hall, M. M. (2004) · Journal of Materials Science Materials in Medicine · doi:10.1023/b:jmsm.0000032821.32577.fc · Cited by 73
Acceleration of apatite nucleation on microrough bioactive titanium for bone‐replacing implants
Aparicio, C., Manero, J. M., Conde, F., Pegueroles, M., Planell, J. A., Vallet‐Regí, M., & Gil, F. J. (2007) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31164 · Cited by 73
Tensile bond between bone and titanium: A reappraisal of osseointegration
Skripitz, R., & Aspenberg, P. (1998) · Acta Orthopaedica Scandinavica · doi:10.3109/17453679809000938 · Cited by 73
Bioactive Bone Cement Based on CaO─SiO 2 ─P 2 O 5 Glass
Kokubo, T., Yoshihara, S., Nishimura, N., Yamamuro, T., & Nakamura, T. (1991) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1991.tb07176.x · Cited by 73
Self-citationSynthesis and characterization of MCM-41 spheres inside bioactive glass–ceramic scaffold
Mortera, R., Onida, B., Fiorilli, S., Cauda, V., Vitale‐Brovarone, C., Baino, F., Verné, E., & Garrone, E. (2007) · Chemical Engineering Journal · doi:10.1016/j.cej.2007.07.094 · Cited by 72
Microstructure and biological properties of micro‐arc oxidation coatings on ZK60 magnesium alloy
Pan, Y., Chen, C., Wang, D. G., & Yu, X. (2012) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.32726 · Cited by 72
Pappas, G. S., Liatsi, P., Kartsonakis, I. Α., Danilidis, I., & Kordas, G. C. (2007) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2007.09.007 · Cited by 72
Setting Behavior and in Vitro Bioactivity of Hydroxyapatite/Calcium Sulfate Cements
Cabañas, M. V., Rodríguez-Lorenzo, L. M., & Vallet‐Regí, M. (2002) · Chemistry of Materials · doi:10.1021/cm021121w · Cited by 72
Lu, X., Wang, Y., Yang, X., Zhang, Q., Zhao, Z., Weng, L., & Leng, Y. (2007) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31471 · Cited by 72
The influence of novel bioactive glasses on in vitro osteoblast behavior
Foppiano, S., Marshall, S. J., Marshall, G. W., Saiz, E., & Tomsia, A. P. (2004) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30159 · Cited by 72
Low Temperature Sintering of Innovative Bioactive Glasses
Bellucci, D., Sola, A., & Cannillo, V. (2012) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2012.05100.x · Cited by 72
Gao, Y., Yerokhin, A. L., & Matthews, A. (2015) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2015.01.030 · Cited by 72
Kobayashi, K., Anada, T., Handa, T., Kanda, N., Yoshinari, M., Takahashi, T., & Suzuki, O. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am5067139 · Cited by 72
Velasco‐Ortega, E., Monsalve-Guil, L., Jiménez-Guerra, Á., Ortíz, I. A., Moreno-Muñoz, J., Núñez-Márquez, E., Pegueroles, M., Pérez, R. A., & Gil, F. J. (2016) · Journal of Oral Implantology · doi:10.1563/aaid-joi-d-16-00088 · Cited by 72
Nakagawa, M., Zhang, L., Udoh, K., Matsuya, S., & Ishikawa, K. (2005) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-005-4753-0 · Cited by 72
Bioactivity of ceramic–polymer composites with varied composition and surface topography
Rea, S. M., Best, S. M., & Bonfield, W. (2004) · Journal of Materials Science Materials in Medicine · doi:10.1023/b:jmsm.0000042685.63383.86 · Cited by 72
Chemical and physical properties of carbonated hydroxyapatite affect breast cancer cell behavior
Choi, S., Coonrod, S. A., Estroff, L. A., & Fischbach, C. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.06.001 · Cited by 71
Roach, M. D., Williamson, S., Blakely, I. P., & Didier, L. M. (2015) · Materials Science and Engineering C · doi:10.1016/j.msec.2015.08.028 · Cited by 71
Effect of Heat Treatments on HVOF Hydroxyapatite Coatings
Fernández, J., Gaona, M., & Guilemany, J. M. (2007) · Journal of Thermal Spray Technology · doi:10.1007/s11666-007-9034-7 · Cited by 71
Sadiasa, A., Sarkar, S. K., Franco, R. A., Min, Y. K., & Lee, B. (2013) · Journal of Biomaterials Applications · doi:10.1177/0885328213478256 · Cited by 71
Control of Surface Topography in Biomimetic Calcium Phosphate Coatings
Costa, D. O., Allo, B. A., Klassen, R. D., Hutter, J. L., Dixon, S. J., & Rizkalla, A. S. (2012) · Langmuir · doi:10.1021/la203224a · Cited by 71
Cruz, M. A. E., Ruiz, G. C. M., de Faria, A. N., Zancanela, D. C., Pereira, L. S., Ciancaglini, P., & Ramos, A. P. (2016) · Applied Surface Science · doi:10.1016/j.apsusc.2015.12.250 · Cited by 71
Catauro, M., Bollino, F., Papale, F., Ferrara, C., & Mustarelli, P. (2015) · Materials Science and Engineering C · doi:10.1016/j.msec.2015.05.016 · Cited by 71
Bioactive glass-polymer materials for controlled release of ibuprofen
de Guevara-Fern, S. L. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00279-5 · Cited by 70
Huang, S., Kang, X., Cheng, Z., Ma, P., Jia, Y., & Lin, J. (2012) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2012.08.004 · Cited by 70
Toworfe, G. K., Bhattacharyya, S., Composto, R. J., Adams, C. S., Shapiro, I. M., & Ducheyne, P. (2008) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.131 · Cited by 70
A novel covalently crosslinked gel of alginate and silane with the ability to form bone‐like apatite
Hosoya, K., Ohtsuki, C., Kawai, T., Kamitakahara, M., Ogata, S., Miyazaki, T., & Tanihara, M. (2004) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30189 · Cited by 70
Incorporation of Ca and P on anodized titanium surface: Effect of high current density
Laurindo, C. A. H., Torres, R. D., Mali, S. A., Gilbert, J. L., & Junior, P. C. S. (2014) · Materials Science and Engineering C · doi:10.1016/j.msec.2014.01.006 · Cited by 70
Influence of P2O5 content on the structure of SiO2-Na2O-CaO-P2O5 bioglasses by 29Si and 31P MAS-NMR
Mercier, C., Follet-Houttemane, C., Pardini, A., & Revel, B. (2011) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2011.07.042 · Cited by 70
Bueno, C. Z., & Moraes, Â. M. (2011) · Journal of Applied Polymer Science · doi:10.1002/app.34192 · Cited by 70
Araujo, J. V., Davidenko, N., Danner, M., Cameron, R. E., & Best, S. M. (2014) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.35128 · Cited by 70
Antibacterial polylactic acid/chitosan nanofibers decorated with bioactive glass
Goh, Y.-F., Akram, M., Alshemary, A. Z., & Hussain, R. (2016) · Applied Surface Science · doi:10.1016/j.apsusc.2016.06.054 · Cited by 70
Liu, X., Wei, D., Zhong, J. Q., Ma, M., Zhou, J., Peng, X., Ye, Y., Sun, G., & He, D. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b04868 · Cited by 70
Cotruț, C. M., Vlădescu, A., Dinu, M., & Vrânceanu, D. M. (2017) · Ceramics International · doi:10.1016/j.ceramint.2017.09.227 · Cited by 70
Covarrubias, C., Cádiz, M., Maureira, M., Celhay, I., Cuadra, F., & Marttens, A. V. (2018) · Journal of Biomaterials Applications · doi:10.1177/0885328218759042 · Cited by 70
Ezekiel, I., Kasim, S. R., Ismail, Y. M. B., & Noor, A. F. M. (2018) · Ceramics International · doi:10.1016/j.ceramint.2018.04.128 · Cited by 70
Priyadarshini, B., & Vijayalakshmi, U. (2018) · Advanced Powder Technology · doi:10.1016/j.apt.2018.07.028 · Cited by 70
Particle release from implantoplasty of dental implants and impact on cells
Barrak, F., Li, S., Muntane, A. M., & Jones, J. R. (2020) · International Journal of Implant Dentistry · doi:10.1186/s40729-020-00247-1 · Cited by 70
Kamitakahara, M., Kawashita, M., Kokubo, T., & Nakamura, T. (2001) · Biomaterials · doi:10.1016/s0142-9612(01)00071-0 · Cited by 70
Self-citationCalcining influence on the powder properties of hydroxyapatite
Patel, N., Gibson, I. R., Ke, S., Best, S. M., & Bonfield, W. (2001) · Journal of Materials Science Materials in Medicine · doi:10.1023/a:1008986430940 · Cited by 70
Huang, J., Silvio, L. D., Wang, M., Rehman, I. U., Ohtsuki, C., & Bonfield, W. (1997) · Journal of Materials Science Materials in Medicine · doi:10.1023/a:1018581100400 · Cited by 70
Zhang, X., Li, X., Li, J., & Sun, X. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am404574t · Cited by 69
Andrade, G. F., Soares, D. C. F., dos Santos, R. G., & de Sousa, E. M. B. (2012) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2012.09.034 · Cited by 69
Shahrabi, S. S., Hesaraki, S., Moemeni, S., & Khorami, M. (2011) · Ceramics International · doi:10.1016/j.ceramint.2011.04.025 · Cited by 69
Saber-Samandari, S., Saber‐Samandari, S., Kiyazar, S., Mohandesi, J. A., & Sadeghi, A. (2016) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2016.01.102 · Cited by 69
Hydroxyapatite Formation on Sol–Gel Derived Poly(ε-Caprolactone)/Bioactive Glass Hybrid Biomaterials
Allo, B. A., Rizkalla, A. S., & Mequanint, K. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am300487c · Cited by 69
Khan, P. K., Mahato, A., Kundu, B., Nandi, S. K., Mukherjee, P., Datta, S., Sarkar, S., Mukherjee, J., Nath, S., Balla, V. K., et al. (2016) · Scientific Reports · doi:10.1038/srep32964 · Cited by 69
Synthesis and in vitro studies of sol-gel derived lithium substituted 58S bioactive glass
Moghanian, A., Firoozi, S., & Tahriri, M. (2017) · Ceramics International · doi:10.1016/j.ceramint.2017.06.174 · Cited by 69
Tripathi, H. S., Rath, C., Kumar, A. S., Manna, P. P., & Singh, S. P. (2018) · Materials Science and Engineering C · doi:10.1016/j.msec.2018.09.041 · Cited by 69
Effect of the continuous solution exchange on the in vitro reactivity of a CaO-SiO2 sol-gel glass
Izquierdo‐Barba, I., Salinas, A. J., & Vallet‐Regí, M. (2000) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(200008)51:2<191::aid-jbm7>3.0.co;2-t · Cited by 69
Boccaccini, A. R., Blaker, J. J., Maquet, V., Chung, W., Jérôme, R., & Nazhat, S. N. (2006) · Journal of Materials Science · doi:10.1007/s10853-006-7575-7 · Cited by 69
Jiang, L., Li, Y., Li, Z., & Jianguo, L. (2007) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-007-3208-1 · Cited by 69
Bolelli, G., Bellucci, D., Cannillo, V., Gadow, R., Killinger, A., Lusvarghi, L., Müller, P., & Sola, A. (2015) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2015.08.039 · Cited by 68
Photoexcited formation of bone apatite‐like coatings on micro‐arc oxidized titanium
Han, Y., & Xu, K. (2004) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30177 · Cited by 68
Effect of bicarbonate on biodegradation behaviour of pure magnesium in a simulated body fluid
Li, Z., Song, G., & Song, S. (2013) · Electrochimica Acta · doi:10.1016/j.electacta.2013.10.131 · Cited by 68
Li, Z., & Chang, J. (2004) · Journal of Materials Science Materials in Medicine · doi:10.1023/b:jmsm.0000026103.44687.d0 · Cited by 68
Eqtesadi, S., Motealleh, A., Pajares, A., & Miranda, P. (2014) · Ceramics International · doi:10.1016/j.ceramint.2014.09.071 · Cited by 68
Shams, M., Karimi, M., Ghollasi, M., Nezafati, N., Shahrousvand, M., Kamali, M., & Salimi, A. (2017) · Materials Science and Engineering C · doi:10.1016/j.msec.2017.02.165 · Cited by 68
Barberi, J., Baino, F., Fiume, E., Örlygsson, G., Nommeots‐Nomm, A., Massera, J., & Verné, E. (2019) · Materials · doi:10.3390/ma12172691 · Cited by 68
Multiscale porosity in mesoporous bioglass 3D-printed scaffolds for bone regeneration
Gómez‐Cerezo, N., Peña, J., Ivanovski, S., Arcos, D., Vallet‐Regí, M., & Vaquette, C. (2020) · Materials Science and Engineering C · doi:10.1016/j.msec.2020.111706 · Cited by 68
Bioactivity in in situ hydroxyapatite–polycaprolactone composites
Verma, D. K., Katti, K. S., & Katti, D. R. (2006) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30774 · Cited by 68
In vitro studies of novel CaO–SiO2–MgO system composite bioceramics
Ni, S., Chang, J., & Chou, L. L. (2007) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-007-3186-3 · Cited by 68
Preparation of a Bioactive Poly(methyl methacrylate)/Silica Nanocomposite
Rhee, S., & Choi, J. (2002) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.2002.tb00269.x · Cited by 68
Anjaneyulu, U., Priyadarshini, B., Nirmala Grace, A., & Vijayalakshmi, U. (2017) · Journal of Sol-Gel Science and Technology · doi:10.1007/s10971-016-4243-5 · Cited by 67
Osseointegration and Bioscience of Implant Surfaces - Current Concepts at Bone-Implant Interface
Ramazanoğlu, M., & Oshi, Y. (2011) · InTech eBooks · doi:10.5772/16936 · Cited by 67
Sambudi, N. S., Sathyamurthy, M., Lee, G. M., & Park, S. B. (2014) · Composites Science and Technology · doi:10.1016/j.compscitech.2014.11.003 · Cited by 67
The mechanical properties and bioactivity of poly(methyl methacrylate)/SiO2–CaO nanocomposite
Lee, K., & Rhee, S. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.03.002 · Cited by 67
Wu, V., & Uskoković, V. (2016) · Biochimica et Biophysica Acta (BBA) - General Subjects · doi:10.1016/j.bbagen.2016.05.022 · Cited by 67
Jugowiec, D., Łukaszczyk, A., Cieniek, Ł., Kowalski, K., Rumian, Ł., Pietryga, K., Marcin, K. O. T., Pamuła, E., & Moskalewicz, T. (2017) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2017.05.056 · Cited by 67
Stability of simulated body fluids such as blood plasma, artificial urine and artificial saliva
Zielińska, M., & Voelkel, A. (2017) · Microchemical Journal · doi:10.1016/j.microc.2017.06.004 · Cited by 67
The role played by modified bioinspired surfaces in interfacial properties of biomaterials
Paterlini, T. T., Nogueira, L. F. B., Tovani, C. B., Cruz, M. A. E., Derradi, R., & Ramos, A. P. (2017) · Biophysical Reviews · doi:10.1007/s12551-017-0306-2 · Cited by 67
Furkó, M., Havasi, V., Kónya, Z., Grünewald, A., Detsch, R., Boccaccini, A. R., & Balázsi, C. (2017) · Boletín de la Sociedad Española de Cerámica y Vidrio · doi:10.1016/j.bsecv.2017.09.003 · Cited by 67
XPS study of bioactive graded layer in Ti–In–Nb–Ta alloy prepared by alkali and heat treatments
Lee, B.-H., Kim, Y. D., & Lee, K. H. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00034-6 · Cited by 67
Bioactivity and mechanical properties of SiO 2 –CaO–P 2 O 5 glass-ceramics
Vallet‐Regí, M., Román, J., Padilla, S., Doadrio, A. L., & Gil, F. J. (2005) · Journal of Materials Chemistry · doi:10.1039/b415134h · Cited by 67
Miyata, N., Fuke, K.-I., Chen, Q., Kawashita, M., Kokubo, T., & Nakamura, T. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00065-0 · Cited by 67
Self-citationGhosh, S., Viana, J. C., Reis, R. L., & Mano, J. F. (2007) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-006-0680-y · Cited by 66
Li, H., Zhao, X., Cao, S., Li, K., Chen, M., Xu, Z., Lu, J., & Zhang, L. (2012) · Applied Surface Science · doi:10.1016/j.apsusc.2012.09.022 · Cited by 66
Sadeghpour, S., Amirjani, A., Hafezi, M., & Zamanian, A. (2014) · Ceramics International · doi:10.1016/j.ceramint.2014.07.039 · Cited by 66
González, B., Colilla, M., Laorden, C. L. D., & Vallet‐Regí, M. (2009) · Journal of Materials Chemistry · doi:10.1039/b915331d · Cited by 66
Cell viability in a wet silica gel
Nieto, A., Areva, S., Wilson, T. M., Viitala, R., & Vallet‐Regí, M. (2009) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.05.033 · Cited by 66
Lebecq, I., Désanglois, F., Leriche, A., & Follet-Houttemane, C. (2007) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31228 · Cited by 66
In vitro osteogenetic activity of pearl
Shen, Y., Zhu, J., Zhang, H., & Zhao, F. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.05.088 · Cited by 66
Zhao, Y., Wu, G., Lu, Q., Wu, J. Y., Xu, R., Yeung, K., & Chu, P. K.-H. (2012) · Thin Solid Films · doi:10.1016/j.tsf.2012.05.046 · Cited by 66
Properties of Zinc Releasing Surfaces for Clinical Applications
Lusvardi, G., Malavasi, G., Menabue, L., Menziani, M. C., Pedone, A., Segre, U., Aina, V., Perardi, A., Morterra, C., Boccafoschi, F., et al. (2007) · Journal of Biomaterials Applications · doi:10.1177/0885328207079731 · Cited by 66
Tranquillo, E., Barrino, F., Poggetto, G. D., & Blanco, I. (2019) · Materials · doi:10.3390/ma12010155 · Cited by 66
Pouroutzidou, G. K., Liverani, L., Theocharidou, A., Tsamesidis, I., Lazaridou, M., Christodoulou, E., Beketova, A., Pappa, C. P., Triantafyllidis, K. S., Anastasiou, A. D., et al. (2021) · International Journal of Molecular Sciences · doi:10.3390/ijms22020577 · Cited by 66
In vitro study of nano-sized zinc doped bioactive glass
Goh, Y.-F., Alshemary, A. Z., Akram, M. A., Kadir, M. R. A., & Hussain, R. (2012) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2012.11.022 · Cited by 66
Lehtonen, T. J., Tuominen, J. U., & Hiekkanen, E. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.08.052 · Cited by 66
Metadata
- Authors
- Kokubo, T., Kushitani, H., Sakka, S., Kitsugi, T., & Yamamuro, T.
- Venue
- Journal of Biomedical Materials Research
- Publisher
- Wiley
- Published
- 1990-06
- Volume
- 24
- Issue
- 6
- Pages
- 721-734
- ISSN
- 0021-9304 (ISSN-L)
- 1097-4636
- OpenAlex
- W2099108227
- Cited by
- 3,836
- References
- 24
- FWCI
- 11.60
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.