The DOI matches its Crossref record; 24 of the 24 references it cites were found in a registry or an index.
Solutions able to reproduce in vivo surface‐structure changes in bioactive glass‐ceramic A‐W3
Abstract
High‐strength bioactive glass‐ceramic A‐W was soaked in various acellular aqueous solutions different in ion concentrations and pH. After soaking for 7 and 30 days, surface structural changes of the glassceramic were investigated by means of Fourier transform infrared reflection spectroscopy, thin‐film x‐ray diffraction, and scanning electronmicroscopic observation, in comparison with in vivo surface structural changes. So‐called Tris buffer solution, pure water buffered with trishydroxymethyl‐aminomethane, which had been used by various workers as a “simulated body fluid,” did not reproduce the in vivo surface structural changes, i.e., apatite formation on the surface. A solution, ion concentrations and pH of which are almost equal to those of the human blood plasma—i.e., Na+ 142.0, K+ 5.0, Mg 2+ 1.5, Ca 2+ 2.5, Cl− 148.8, HCO 3− 4.2 and PO 42− 1.0 mM and buffered at pH 7.25 with the trishydroxymethylaminomethane–most precisely reproduced in vivo surface structure change. This shows that careful selection of simulated body fluid is required for in vitro experiments. The results also support the concept that the apatite phase on the surface of glass‐ceramic A‐W is formed by a chemical reaction of the glass‐ceramic with the Ca 2+, HPO 42−, and OH− ions in the body fluid.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
THE CHEMICAL DYNAMICS OF BONE MINERAL
NEUMAN, W. F., & NEUMAN, M. W. (1959) · The American Journal Of The Medical Sciences · doi:10.1097/00000441-195912000-00030 · Cited by 1,032
Hench, L. L., & Wilson, J. (1984) · Science · doi:10.1126/science.6093253 · Cited by 982
Ca, P‐rich layer formed on high‐strength bioactive glass‐ceramic A‐W
Kokubo, T., Ito, S., Huang, Z. T., Hayashi, T., Sakka, S., Kitsugi, T., & Yamamuro, T. (1990) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820240306 · Cited by 859
Self-citationThe chemical dynamics of bone mineral.
Neuman, W. F., & Neuman, M. W. (1958) · Cited by 710
Chemical anatomy, physiology and pathology of extracellular fluid
Gamble, J. L. (1954) · University Microfilms International eBooks · Cited by 579
A new glass‐ceramic for bone replacement: Evaluation of its bonding to bone tissue
Nakamura, T., Yamamuro, T., Higashi, S., Kokubo, T., & Itoo, S. (1985) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820190608 · Cited by 441
Self-citationFormation of a high-strength bioactive glass-ceramic in the system MgO-CaO-SiO2-P2O5
Kokubo, T., Ito, S., Sakka, S., & Yamamuro, T. (1986) · Journal of Materials Science · doi:10.1007/bf01145520 · Cited by 351
Self-citationBioceramics: material characteristics versus in vivo behavior.
Ducheyne, P. (1987) · PubMed · Cited by 323
Fundamental aspects of biocompatibility
Williams, D. F. (1981) · CRC Press eBooks · Cited by 301
Compositional dependence of the formation of calcium phosphate films on bioglass
Ogino, M., Ohuchi, F. S., & Hench, L. L. (1980) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820140107 · Cited by 281
Cited by
Items 901–1,000 of 1,000
Bellucci, D., Sola, A., Cacciotti, I., Bartoli, C., Gazzarri, M., Bianco, A., Chiellini, E., & Cannillo, V. (2014) · Materials Science and Engineering C · doi:10.1016/j.msec.2014.05.047 · Cited by 59
Influence of sodium content on the properties of bioactive glasses for use in air abrasion
Farooq, I. S., Tylkowski, M., Müller, S., Janicki, T., Brauer, D. S., & Hill, R. G. (2013) · Biomedical Materials · doi:10.1088/1748-6041/8/6/065008 · Cited by 59
The role of strontium and potassium on crystallization and bioactivity of Na2O–CaO–P2O5–SiO2 glasses
Salman, S. M., Salama, S. N., & Abo-Mosallam, H. A. (2011) · Ceramics International · doi:10.1016/j.ceramint.2011.06.037 · Cited by 59
Catauro, M., Bollino, F., & Papale, F. (2013) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34721 · Cited by 59
A Review Paper on Biomimetic Calcium Phosphate Coatings
Lin, X., de Groot, K., Wang, D., Hu, Q., Wismeijer, D., & Liu, Y. (2015) · The Open Biomedical Engineering Journal · doi:10.2174/1874120701509010056 · Cited by 59
Vathyam, R., Wondimu, E. B., Das, S., Zhang, C., Hayes, S. E., Tao, Z., & Asefa, T. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp1108587 · Cited by 59
Balestriere, M. A., Schuhladen, K., Seitz, K. H., Boccaccini, A. R., Ceré, S., & Ballarre, J. (2020) · Journal of Electroanalytical Chemistry · doi:10.1016/j.jelechem.2020.114735 · Cited by 59
Areva, S., Peltola, T., Säilynoja, E., Laajalehto, K., Lindén, M., & Rosenholm, J. B. (2002) · Chemistry of Materials · doi:10.1021/cm0107272 · Cited by 59
Glass–glass ceramic thermoseeds for hyperthermic treatment of bone tumors
Ruiz‐Hernández, E., Serrano, M. C., Arcos, D., & Vallet‐Regí, M. (2006) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30889 · Cited by 59
Sheikh, F. A., Barakat, N. A. M., Kanjwal, M. A., Park, S., Park, D. K., & Kim, H. Y. (2010) · Macromolecular Research · doi:10.1007/s13233-009-0111-2 · Cited by 58
Gellan Gum-Based Hydrogel Bilayered Scaffolds for Osteochondral Tissue Engineering
Pereira, D. R., Canadas, R. F., Silva‐Correia, J., Marques, A. P., Reis, R. L., & Oliveira, J. M. (2013) · Key engineering materials · doi:10.4028/www.scientific.net/kem.587.255 · Cited by 58
Fritea, L., Bănică, F., Costea, T. O., Moldovan, L., Iovan, C., & Cavalu, S. D. (2018) · Journal of Electroanalytical Chemistry · doi:10.1016/j.jelechem.2018.10.015 · Cited by 58
Zhang, Y., Hao, L., Savalani, M. M., Harris, R. A., & Tanner, K. E. (2007) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31622 · Cited by 58
Novel hybrid PET/DFA–TiO2 nanocomposites by in situ polycondensation
Fray, M. E., & Boccaccini, A. R. (2005) · Materials Letters · doi:10.1016/j.matlet.2005.03.008 · Cited by 58
Initial events at the bioactive glass surface in contact with protein-containing solutions
Kaufmann, E. E., Ducheyne, P., Radin, S., Bonnell, D. A., & Composto, R. J. (2000) · Journal of Biomedical Materials Research · doi:10.1002/1097-4636(20001215)52:4<825::aid-jbm28>3.0.co;2-m · Cited by 58
Effect of spatial design and thermal oxidation on apatite formation on Ti–15Zr–4Ta–4Nb alloy
Sugino, A., Ohtsuki, C., Tsuru, K., Hayakawa, S., Nakano, T., Okazaki, Y., & Osaka, A. (2008) · Acta Biomaterialia · doi:10.1016/j.actbio.2008.07.014 · Cited by 58
Vitale‐Brovarone, C., Verné, E., Bosetti, M., Appendino, P. M., & Cannas, M. F. (2005) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-005-4425-0 · Cited by 58
In vitro evaluation of bone bioactivity
Takadama, H., & Kokubo, T. (2008) · Elsevier eBooks · doi:10.1533/9781845694227.1.165 · Cited by 58
Self-citationEvaluation of bioactive bone cement in canine total hip arthroplasty
Fujita, H., Ido, K., Matsuda, Y., Iida, H., Oka, M., Kitamura, Y., & Nakamura, T. (2000) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(200002)49:2<273::aid-jbm17>3.0.co;2-y · Cited by 58
Effect of thermal treatment on apatite-forming ability of NaOH-treated tantalum metal
Miyazaki, T., Kim, H.-M., Kokubo, T., Miyaji, F., Kato, H., & Nakamura, T. (2001) · Journal of Materials Science Materials in Medicine · doi:10.1023/a:1011260224120 · Cited by 57
Self-citationMassera, J., Petit, L. C., Cardinal, T., Videau, J. J., Hupa, M. M., & Hupa, L. (2013) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-013-4910-9 · Cited by 57
Costa, P. F., Vaquette, C., Baldwin, J., Chhaya, M. P., Gomes, M. E., Reis, R. L., Theodoropoulos, C., & Hutmacher, D. W. (2014) · Biofabrication · doi:10.1088/1758-5082/6/3/035006 · Cited by 57
Zhou, P., Cheng, X., Xia, Y. Q., Wang, P., Zou, K., Xu, S., & Du, J. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am505493j · Cited by 57
Permyakova, E. S., Kiryukhantsev–Korneev, P. V., Kotyakova, K. Y., Сергеевич, К. А., Polčák, J., Zhitnyak, I. Y., Gloushankova, N. A., Shtansky, D. V., & Manakhov, A. M. (2019) · Nanomaterials · doi:10.3390/nano9121769 · Cited by 57
Morphological variation of hydroxyapatite grown in aqueous solution based on simulated body fluid
Kobayashi, T., Ono, S., Hirakura, S., Oaki, Y., & Imai, H. (2011) · CrystEngComm · doi:10.1039/c1ce06114c · Cited by 57
SBA-15-collagen hybrid material for drug delivery applications
Fagundes, L. B., Sousa, T., Andrada, A. D. S., Silva, V. V., & de Sousa, E. M. B. (2006) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2006.03.111 · Cited by 57
Concept and Development of Vector Ceramics for Bio-interface Engineering
Yamashita, K., & Nakamura, S. (2005) · Journal of the Ceramic Society of Japan · doi:10.2109/jcersj.113.1 · Cited by 57
Dissolution Kinetics of a Bioactive Glass by Continuous Measurement
Fagerlund, S., Ek, P., Hupa, L., & Hupa, M. M. (2012) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2012.05374.x · Cited by 57
Letaief, N., Lucas‐Girot, A., Oudadesse, H., Dorbez-Sridi, R., & Boullay, P. (2014) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2014.03.035 · Cited by 57
Manzano, M., Arcos, D., Delgado, M. R., Ruiz, E., Gil, F. J., & Vallet‐Regí, M. (2006) · Chemistry of Materials · doi:10.1021/cm0615370 · Cited by 57
Microwave processing of starch‐based porous structures for tissue engineering scaffolds
Torres, F. G., Boccaccini, A. R., & Troncoso, O. P. (2006) · Journal of Applied Polymer Science · doi:10.1002/app.25345 · Cited by 57
Nezafati, N., Moztarzadeh, F., & Hesaraki, S. (2012) · Biotechnology and Bioprocess Engineering · doi:10.1007/s12257-012-0046-x · Cited by 57
Hu, Y., Zhu, Y., Zhou, X., Ruan, C., Pan, H., & Catchmark, J. M. (2016) · Journal of Materials Chemistry B · doi:10.1039/c5tb02091c · Cited by 56
Guarino, V., Taddei, P., Foggia, M. D., Fagnano, C., Ciapetti, G., & Ambrosio, L. (2009) · Tissue Engineering Part A · doi:10.1089/ten.tea.2008.0543 · Cited by 56
Iwatsubo, T., Kishi, R., Miura, T., Ohzono, T., & Yamaguchi, T. (2015) · The Journal of Physical Chemistry B · doi:10.1021/acs.jpcb.5b03181 · Cited by 56
Shah, F. A., Brauer, D. S., Wilson, R. M., Hill, R. G., & Hing, K. A. (2013) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34724 · Cited by 56
Deliormanlı, A. M. (2015) · Ceramics International · doi:10.1016/j.ceramint.2015.09.016 · Cited by 56
Abo-Naf, S. M., Khalil, E., El-Sayed, E.-S. M., Zayed, H. A., & Youness, R. A. (2015) · Spectrochimica Acta Part A Molecular and Biomolecular Spectroscopy · doi:10.1016/j.saa.2015.02.076 · Cited by 56
Osseous integration in porous tantalum implants
Paganias, C. G., Tsakotos, G. A., Koutsostathis, S. D., & Macheras, G. A. (2012) · Indian Journal of Orthopaedics · doi:10.4103/0019-5413.101032 · Cited by 56
Coating of bone-like apatite for development of bioactive materials for bone reconstruction
Kamitakahara, M., Ohtsuki, C., & Miyazaki, T. (2007) · Biomedical Materials · doi:10.1088/1748-6041/2/4/r01 · Cited by 56
Analysis of Mineral Trioxide Aggregate Surface when Set in the Presence of Fetal Bovine Serum
Tingey, M. C., Bush, P. J., & Levine, M. S. (2007) · Journal of Endodontics · doi:10.1016/j.joen.2007.09.013 · Cited by 56
Boonkaew, B., Barber, P. M., Rengpipat, S., Supaphol, P., Kempf, M., He, J., John, V. T., & Cuttle, L. (2014) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.24095 · Cited by 56
An alternative technique to shape scaffolds with hierarchical porosity at physiological temperature
Peña, J., Román, J., Cabañas, M. V., & Vallet‐Regí, M. (2009) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.10.049 · Cited by 56
Alvarez, E., Márquez, A. G., Devic, T., Steunou, N., Serre, C., Bonhomme, C., Gervais, C., Izquierdo‐Barba, I., Vallet‐Regí, M., Laurencin, D., et al. (2013) · CrystEngComm · doi:10.1039/c3ce41346b · Cited by 56
Bioactive and Biomimetic Restorative Materials: A Comprehensive Review. Part II
Jefferies, S. R. (2013) · Journal of Esthetic and Restorative Dentistry · doi:10.1111/jerd.12066 · Cited by 56
Biomimetic coating on bioactive glass‐derived scaffolds mimicking bone tissue
Bellucci, D., Sola, A., Gentile, P., Ciardelli, G., & Cannillo, V. (2012) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34271 · Cited by 56
Effect of ZrO2 on the bioactive properties of B2O3–SiO2–P2O5–Na2O–CaO glass system
Krishnamacharyulu, N., Mohini, G. J., Baskaran, G. S., Kumar, V. R., & Veeraiah, N. (2016) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2016.07.044 · Cited by 56
Inzunza, D., Covarrubias, C., Marttens, A. V., Leighton, Y., Carvajal, J. C., Valenzuela, F. J., Díaz‐Dosque, M., Méndez, N., Martínez, C., Pino, A. M., et al. (2013) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34673 · Cited by 56
ElBatal, H. A., Khalil, E., & Hamdy, Y. M. (2008) · Ceramics International · doi:10.1016/j.ceramint.2008.06.004 · Cited by 56
Sohrabi, M., Hesaraki, S., Kazemzadeh, A., & Alizadeh, M. (2013) · Materials Science and Engineering C · doi:10.1016/j.msec.2013.05.005 · Cited by 56
Munirathinam, B., & Neelakantan, L. (2015) · Materials Science and Engineering C · doi:10.1016/j.msec.2015.01.045 · Cited by 56
Bioactivity of Fe2O3-containing CaO-SiO2 glasses: in vitro evaluation
Ebisawa, Y., Kokubo, T., Ohura, K., & Yamamuro, T. (1993) · Journal of Materials Science Materials in Medicine · doi:10.1007/bf00122273 · Cited by 56
Self-citationOral Factors Affecting Titanium Elution and Corrosion: An In Vitro Study Using Simulated Body Fluid
Suito, H., Iwawaki, Y., Goto, T., Tomotake, Y., & Ichikawa, T. (2013) · PLoS ONE · doi:10.1371/journal.pone.0066052 · Cited by 56
Ultrastructural Study of Bone Formation on Synthetic Hydroxyapatite in Osteoblast Cultures
Sautier, J., Nefussi, J.-R., & Forest, N. (1991) · Cells and materials · Cited by 56
Biocompatibility evaluation of sputtered zirconium-based thin film metallic glass-coated steels
Subramanian, B., Sundaram, M., & Rajan, S. T. (2015) · International Journal of Nanomedicine · doi:10.2147/ijn.s79977 · Cited by 55
D’Elía, N. L., Gravina, A. N., Ruso, J. M., Laiuppa, J. A., Santillán, G. E., & Messina, P. V. (2013) · Biochimica et Biophysica Acta (BBA) - General Subjects · doi:10.1016/j.bbagen.2013.07.020 · Cited by 55
Micropush‐out dentine bond strength of a new gutta‐percha and niobium phosphate glass composite
Carvalho, C. N., Martinelli, J. R., Bauer, J. R. D. O., Haapasalo, M., Shen, Y., Bradaschia-Corrêa, V., Manso, A. P., & Gavini, G. (2014) · International Endodontic Journal · doi:10.1111/iej.12334 · Cited by 55
Biocompatibility and levofloxacin delivery of mesoporous materials
Cicuéndez, M., Izquierdo‐Barba, I., Portolés, M. T., & Vallet‐Regí, M. (2012) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2012.11.029 · Cited by 55
Silver release from hydroxyapatite self-assembling calcium–phosphate glasses
Simon, V., Albon, C., & Simon, S. (2007) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2007.08.063 · Cited by 55
Compositional dependence of in-vitro bioactivity in sodium calcium borate glasses
Manupriya, Thind, K. S., Singh, K., Kumar, V., Sharma, G. D., Singh, D. P., & Singh, D. P. (2009) · Journal of Physics and Chemistry of Solids · doi:10.1016/j.jpcs.2009.05.025 · Cited by 55
Direct Writing of Polycaprolactone Polymer for Potential Biomedical Engineering Applications
Rasekh, M., Ahmad, Z., Day, R. M., Wickam, A., & Edirisinghe, M. J. (2011) · Advanced Engineering Materials · doi:10.1002/adem.201080126 · Cited by 55
Toskas, G., Cherif, C., Hund, R., Laourine, E., Fahmi, A., & Mahltig, B. (2011) · ACS Applied Materials & Interfaces · doi:10.1021/am200858s · Cited by 55
Pereira, D., Canadas, R. F., Silva‐Correia, J., Morais, A. D. S., Oliveira, M. B., Dias, I. R., Mano, J. F., Marques, A. P., Reis, R. L., & Oliveira, J. M. (2018) · Applied Materials Today · doi:10.1016/j.apmt.2018.06.005 · Cited by 55
Pillai, M. M., Janarthanan, G., Kumar, R. S., Kumar, G., Shanthakumari, S., Sahanand, K. S., Bhattacharyya, A., & Selvakumar, R. (2018) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.36372 · Cited by 55
Kumar, P., Saini, M., Dehiya, B. S., Umar, A., Sindhu, A., Mohammed, H., Al‐Hadeethi, Y., & Guo, Z. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.01.035 · Cited by 55
Mohn, D., Bruhin, C., Luechinger, N. A., Stark, W. J., Imfeld, T. N., & Zehnder, M. (2010) · International Endodontic Journal · doi:10.1111/j.1365-2591.2010.01772.x · Cited by 55
Polycaprolactone Scaffolds for Bone Tissue Engineering
Choong, C. S. N., Triffitt, J. T., & Cui, Z. (2004) · Food and Bioproducts Processing · doi:10.1205/0960308041614864 · Cited by 55
Promoted hydroxyapatite nucleation on titanium ion-implanted with sodium
Pham, M. T., Maitz, M. F., Matz, W., Reuther, H., Richter, E., & Steiner, G. R. (2000) · Thin Solid Films · doi:10.1016/s0040-6090(00)01553-4 · Cited by 55
Preparation and in vitro characterization of electrospun 45S5 bioactive glass nanofibers
Deliormanlı, A. M. (2014) · Ceramics International · doi:10.1016/j.ceramint.2014.08.086 · Cited by 55
Design and functionalization of chitin-based microsphere scaffolds
Silva, S. S., Duarte, A. R. C., Mano, J. F., & Reis, R. L. (2013) · Green Chemistry · doi:10.1039/c3gc41060a · Cited by 55
Mesoporous titanium dioxide coating for metallic implants
Xia, W., Grandfield, K., Hoess, A., Ballo, A. M., Cai, Y., & Engqvist, H. (2011) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.31925 · Cited by 55
Mesoporous bioactive glasses: Mechanical reinforcement by means of a biomimetic process
Arcos, D., Vila, M., López‐Noriega, A., Rossignol, F., Champion, É., Oliveira, F. J., & Vallet‐Regí, M. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.02.012 · Cited by 55
Boccaccini, A. R., Gerhardt, L. ‐., Rebeling, S., & Blaker, J. J. (2004) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2004.11.002 · Cited by 55
In Vitro Measurement of Silicone Bleed From Breast Implants
Yu, L. T., LaTorre, G. P., Marotta, J. S., Batich, C. D., & Hardt, N. S. (1996) · Plastic & Reconstructive Surgery · doi:10.1097/00006534-199604000-00011 · Cited by 55
Development of bioactive PMMA-based cement by modification with alkoxysilane and calcium salt
Ohtsuki, C., Miyazaki, T., Kyomoto, M., Tanihara, M., & Osaka, A. (2001) · Journal of Materials Science Materials in Medicine · doi:10.1023/a:1012876108210 · Cited by 55
Al‐Kady, A. S., Gaber, M., Hussein, M. M., & Ebeid, E. M. (2010) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2010.10.007 · Cited by 54
Characterization of nanostructured hydroxyapatite prepared by Nd:YAG laser deposition
Ismail, R. A., Salim, E. T., & Hamoudi, W. K. (2012) · Materials Science and Engineering C · doi:10.1016/j.msec.2012.08.002 · Cited by 54
In Situ Bone‐Like Apatite Formation From a Bioeutectic ® Ceramic in SBF Dynamic Flow
Aza, A. H. D., Velásquez, P., Alemany, M. I., Peña, P., & Aza, P. N. D. (2007) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2007.01534.x · Cited by 54
Oliveira, A. L., Malafaya, P. B., da Costa, S. A., Sousa, R. A., & Reis, R. L. (2007) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-006-0683-8 · Cited by 54
Funao, H., Nagai, S., Sasaki, A., Hoshikawa, T., Tsuji, T., Okada, Y., Koyasu, S., Toyama, Y., Nakamura, M., Aizawa, M., et al. (2016) · Scientific Reports · doi:10.1038/srep23238 · Cited by 54
Pelegrino, M. T., Silva, L. C., Watashi, C. M., Haddad, P. S., Rodrigues, T., & Seabra, A. B. (2017) · Journal of Nanoparticle Research · doi:10.1007/s11051-017-3747-4 · Cited by 54
Youness, R. A., Taha, M. A., Ibrahim, M., & El-Kheshen, A. A. (2017) · Silicon · doi:10.1007/s12633-017-9587-0 · Cited by 54
Youness, R. A., Taha, M. A., & Ibrahim, M. (2019) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2019.122011 · Cited by 54
Corrosion behavior of Mg–Ca–Zn alloys with high Zn content
Gong, C., He, X., & Yan, X. (2021) · Journal of Physics and Chemistry of Solids · doi:10.1016/j.jpcs.2021.109952 · Cited by 54
Amini, Z., Rudsary, S. S., Shahraeini, S. S., Dizaji, B. F., Goleij, P., Bakhtiari, A., Irani, M., & Sharifianjazi, F. (2021) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2021.117680 · Cited by 54
RetractedTripathi, H. S., Hira, S. K., Kumar, A. S., Gupta, U., Manna, P. P., & Singh, S. P. (2015) · Ceramics International · doi:10.1016/j.ceramint.2015.05.143 · Cited by 54
Taddei, P., Tinti, A., Reggiani, M., & Fagnano, C. (2004) · Journal of Molecular Structure · doi:10.1016/j.molstruc.2004.10.039 · Cited by 54
Jung, Y., Shin, K. R., Ko, Y. G., & Shin, D. H. (2013) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2013.01.060 · Cited by 54
Shinzato, S., Nakamura, T., Kokubo, T., & Kitamura, Y. (2000) · Journal of Biomedical Materials Research · doi:10.1002/1097-4636(20010315)54:4<491::aid-jbm40>3.0.co;2-o · Cited by 54
Self-citationd’Haese, R., Pawłowski, L., Bigan, M., Jaworski, R., & Martel, M. (2009) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2009.10.022 · Cited by 54
Bovine BMP osteoinductive potential enhanced by functionalized dextran-derived hydrogels
Maire, M., Chaubet, F., Mary, P., Blanchat, C., Meunier, A., & Logeart‐Avramoglou, D. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.01.020 · Cited by 54
Bioactive Glasses for Nonbearing Applications in Total Joint Replacement
Rahaman, M. N., Brown, R. F. R., Bal, B. S., & Day, D. E. (2006) · Seminars in Arthroplasty JSES · doi:10.1053/j.sart.2006.09.003 · Cited by 54
Oliveira, J. M., da Costa, S. A., Leonor, I. B., Malafaya, P. B., Mano, J. F., & Reis, R. L. (2008) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31817 · Cited by 54
Sambudi, N. S., Cho, S., & Cho, K. (2016) · RSC Advances · doi:10.1039/c6ra03147a · Cited by 54
Chen, Q., Miyata, N., Kokubo, T., & Nakamura, T. (2001) · Journal of Materials Science Materials in Medicine · doi:10.1023/a:1011267612849 · Cited by 54
Self-citationSurface reaction of stoichiometric and calcium-deficient hydroxyapatite in simulated body fluid
Lin, J. H. C., Kuo, K. H., Ding, S., & Ju, C. P. (2001) · Journal of Materials Science Materials in Medicine · doi:10.1023/a:1011280828663 · Cited by 54
Formation of apatite layers on modified canasite glass–ceramics in simulated body fluid
Miller, C. A., Kokubo, T., Reaney, I. M., Hatton, P. V., & James, P. F. (2001) · Journal of Biomedical Materials Research · doi:10.1002/jbm.10018 · Cited by 54
Self-citationPhase Transformation of Octacalcium Phosphate in vivo and in vitro
Ban, S., Jinde, T., & Hasegawa, J. (1992) · Dental Materials Journal · doi:10.4012/dmj.11.130 · Cited by 54
Lu (1999) · doi:10.1002/(sici)1097-4636(199908)46:2
Self-citation
Metadata
- Authors
- Kokubo, T., Kushitani, H., Sakka, S., Kitsugi, T., & Yamamuro, T.
- Venue
- Journal of Biomedical Materials Research
- Publisher
- Wiley
- Published
- 1990-06
- Volume
- 24
- Issue
- 6
- Pages
- 721-734
- ISSN
- 0021-9304 (ISSN-L)
- 1097-4636
- OpenAlex
- W2099108227
- Cited by
- 3,836
- References
- 24
- FWCI
- 11.60
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.