The DOI matches its Crossref record; 44 of the 44 references it cites were found in a registry or an index.
Mechanical properties of calcium phosphate scaffolds fabricated by robocasting
Abstract
The mechanical behavior under compressive stresses of β‐tricalcium phosphate (β‐TCP) and hydroxyapatite (HA) scaffolds fabricated by direct‐write assembly (robocasting) technique is analyzed. Concentrated colloidal inks prepared from β‐TCP and HA commercial powders were used to fabricate porous structures consisting of a 3‐D tetragonal mesh of interpenetrating ceramic rods. The compressive strength and elastic modulus of these model scaffolds were determined by uniaxial testing to compare the relative performance of the selected materials. The effect of a 3‐week immersion in simulated body fluid (SBF) on the strength of the scaffolds was also analyzed. The results are compared with those reported in the literature for calcium phosphate scaffolds and human bone. The robocast calcium phosphate scaffolds were found to exhibit excellent mechanical performances in terms of strength, especially the HA structures after SBF immersion, indicating a great potential of this type of scaffolds for use in load‐bearing bone tissue engineering applications. © 2007 Wiley Periodicals, Inc. J Biomed Mater Res 2008
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Statistical Distribution Function of Wide Applicability
Weibull, W. (1951) · Journal of Applied Mechanics · doi:10.1115/1.4010337 · Cited by 11,604
Porosity of 3D biomaterial scaffolds and osteogenesis
Karageorgiou, V., & Kaplan, D. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.02.002 · Cited by 6,622
Porous scaffold design for tissue engineering
Hollister, S. J. (2005) · Nature Materials · doi:10.1038/nmat1421 · Cited by 3,969
Department of Materials, U. O. O., Sachlos, E., & Czernuszka, J. (2003) · European Cells and Materials · doi:10.22203/ecm.v005a03 · Cited by 1,303
Mechanism of apatite formation on CaO SiO2P2O5 glasses in a simulated body fluid
Ohtsuki, C., Kokubo, T., & Yamamuro, T. (1992) · Journal of Non-Crystalline Solids · doi:10.1016/s0022-3093(05)80556-3 · Cited by 879
Freeze casting of hydroxyapatite scaffolds for bone tissue engineering
Deville, S., Saiz, E., & Tomsia, A. P. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.06.028 · Cited by 873
Self-citationWoodard, J. R., Hilldore, A. J., Lan, S. K., Park, C. J., Morgan, A. W., Eurell, J. A. C., Clark, S. G., Wheeler, M. B., Jamison, R. D., & Wagoner Johnson, A. J. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2006.08.021 · Cited by 829
Colloidal Inks for Directed Assembly of 3-D Periodic Structures
Smay, J. E., Cesarano, J., & Lewis, J. A. (2002) · Langmuir · doi:10.1021/la0257135 · Cited by 700
Predicting the compressive mechanical behavior of bone
Keller, T. S. (1994) · Journal of Biomechanics · doi:10.1016/0021-9290(94)90056-6 · Cited by 667
Biodegradation behavior of various calcium phosphate materials in bone tissue
Klein, C. P. A. T., Driessen, A. A., de Groot, K., & van den Hooff, A. (1983) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820170505 · Cited by 584
Carbonated hydroxyapatite as bone substitute
Landi, E., Celotti, G., Logroscino, G., & Tampieri, A. (2003) · Journal of the European Ceramic Society · doi:10.1016/s0955-2219(03)00304-2 · Cited by 581
Mechanical and in vivo performance of hydroxyapatite implants with controlled architectures
Chu, T.-M. G., Orton, D. G., Hollister, S. J., Feinberg, S. E., & Halloran, J. W. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00243-5 · Cited by 554
Ramay, H. R., & Zhang, M. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00171-6 · Cited by 544
Radin, S. R., & Ducheyne, P. (1993) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820270106 · Cited by 521
Biphasic calcium phosphate nanocomposite porous scaffolds for load-bearing bone tissue engineering
Ramay, H. R. R., & Zhang, M. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.12.023 · Cited by 471
Ducheyne, P., Radin, S., & King, L. (1993) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820270105 · Cited by 467
Porous calcium polyphosphate scaffolds for bone substitute applications — in vitro characterization
Pilliar, R. M., Filiaggi, M. J., Wells, J. D., Grynpas, M. D., & Kandel, R. A. (2001) · Biomaterials · doi:10.1016/s0142-9612(00)00261-1 · Cited by 359
Bignon, A., Chouteau, J., Chevalier, J., Fantozzi, G., Carret, J.-P., Chavassieux, P., Boivin, G., Melin, M., & Hartmann, D. (2003) · Journal of Materials Science: Materials in Medicine · doi:10.1023/b:jmsm.0000004006.90399.b4 · Cited by 326
Microporosity enhances bioactivity of synthetic bone graft substitutes
Hing, K. A., Annaz, B., Saeed, S., Revell, P. A., & Buckland, T. (2005) · Journal of Materials Science: Materials in Medicine · doi:10.1007/s10856-005-6988-1 · Cited by 325
Influence of porosity and pore size on the compressive strength of porous hydroxyapatite ceramic
Liu, D.-M. (1997) · Ceramics International · doi:10.1016/s0272-8842(96)00009-0 · Cited by 325
Sintering and robocasting of β-tricalcium phosphate scaffolds for orthopaedic applications
Miranda, P., Saiz, E., Gryn, K., & Tomsia, A. P. (2006) · Acta Biomaterialia · doi:10.1016/j.actbio.2006.02.004 · Cited by 304
Self-citationAlmirall, A., Larrecq, G., Delgado, J. A., Martı́nez, S., Planell, J. A., & Ginebra, M. P. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.10.066 · Cited by 295
An improvement in sintering property of β-tricalcium phosphate by addition of calcium pyrophosphate
Ryu, H.-S., Youn, H.-J., Sun Hong, K., Chang, B.-S., Lee, C.-K., & Chung, S.-S. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00201-0 · Cited by 272
Concentrated hydroxyapatite inks for direct-write assembly of 3-D periodic scaffolds
Michna, S., Wu, W., & Lewis, J. A. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.02.040 · Cited by 266
A new method to produce macropores in calcium phosphate cements
del Real, R. P., Wolke, J. G. C., Vallet-Regı́, M., & Jansen, J. A. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00101-1 · Cited by 265
Mediation of bone ingrowth in porous hydroxyapatite bone graft substitutes
Hing, K. A., Best, S. M., Tanner, K. E., Bonfield, W., & Revell, P. A. (2004) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.10050 · Cited by 216
Preparation of macroporous calcium phosphate cement tissue engineering scaffold
Barralet, J. E., Grover, L., Gaunt, T., Wright, A. J., & Gibson, I. R. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00401-x · Cited by 215
Effect of the macroporosity for osseous substitution of calcium phosphate ceramics.
Daculsi, G., & Passuti, N. (1990) · PubMed · Cited by 200
Kondo, N., Ogose, A., Tokunaga, K., Umezu, H., Arai, K., Kudo, N., Hoshino, M., Inoue, H., Irie, H., Kuroda, K., et al. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.04.016 · Cited by 187
Effects of geometry of hydroxyapatite as a cell substratum in BMP-induced ectopic bone formation
Jin, Q.-M., Takita, H., Kohgo, T., Atsumi, K., Itoh, H., & Kuboki, Y. (2000) · Journal of Biomedical Materials Research · doi:10.1002/1097-4636(20000905)51:3<491::aid-jbm25>3.0.co;2-1 · Cited by 170
Rose, F. R. A. J., Cyster, L. A., Grant, D. M., Scotchford, C. A., Howdle, S. M., & Shakesheff, K. M. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2004.01.012 · Cited by 167
A synthetic bone implant macroscopically identical to cancellous bone
Tancred, D. (1998) · Biomaterials · doi:10.1016/s0142-9612(98)00141-0 · Cited by 161
Preparation and characterisation of porous hydroxyapatite bioceramic via a slip-casting route
Liu, D. (1998) · Ceramics International · doi:10.1016/s0272-8842(97)00033-3 · Cited by 122
Preparation of porous hydroxyapatite
Tian, J., & Tian, J. (2001) · Journal of Materials Science · doi:10.1023/a:1017935411108 · Cited by 120
Charrière, E., Lemaître, J., & Zysset, P. K. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00406-4 · Cited by 120
The elastic properties of hard tissues and apatites
Grenoble, D. E., Katz, J. L., Dunn, K. L., Gilmore, R. S., & Murty, K. L. (1972) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820060311 · Cited by 113
Repair of an intercalated long bone defect with a synthetic biodegradable bone-inducing implant
Yoneda, M., Terai, H., Imai, Y., Okada, T., Nozaki, K., Inoue, H., Miyamoto, S., & Takaoka, K. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.01.054 · Cited by 103
Fracture modes under uniaxial compression in hydroxyapatite scaffolds fabricated by robocasting
Miranda, P., Pajares, A., Saiz, E., Tomsia, A. P., & Guiberteau, F. (2007) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31272 · Cited by 102
Self-citationSous, M. (1998) · Biomaterials · doi:10.1016/s0142-9612(98)00118-5 · Cited by 99
Kawata, M., Uchida, H., Itatani, K., et al. (2004) · Journal of Materials Science Materials in Medicine · doi:10.1023/b:jmsm.0000032823.66093.aa · Cited by 89
Porous Calcium Phosphate Ceramics Modified with PLGA-Bioactive Glass
Miao, S., Tan, L. P., Tan, L.-S., et al. (2007) · QUT ePrints (Queensland University of Technology) · Cited by 85
Role of flaw statistics in contact fracture of brittle coatings
Miranda, P., Pajares, A., Guiberteau, F., et al. (2001) · Acta Materialia · doi:10.1016/s1359-6454(01)00280-4 · Cited by 47
Self-citationCFT description of small objects in AdS
Horowitz, G. T., & Hubeny, V. E. (2000) · Journal of High Energy Physics · doi:10.1088/1126-6708/2000/10/027 · Cited by 36
CFT Description of Small Objects in AdS
Horowitz, G. T., & Hubeny, V. E. (2000) · CERN Document Server (European Organization for Nuclear Research) · Cited by 26
Cited by
3D printing of ceramics: A review
Chen, Z., Li, Z., Li, J., Liu, C., Lao, C., Fu, Y., Liu, C., Li, Y., Wang, P., & He, Y. (2019) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2018.11.013 · Cited by 2,109
Direct Ink Writing: A 3D Printing Technology for Diverse Materials
Saadi, M. A. S. R., Maguire, A., Pottackal, N. T., Thakur, M. S. H., Ikram, M. M., Hart, A. J., Ajayan, P. M., & Rahman, M. M. (2022) · Advanced Materials · doi:10.1002/adma.202108855 · Cited by 1,335
A review on 3D micro-additive manufacturing technologies
Vaezi, M., Seitz, H., & Yang, S. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4605-2 · Cited by 1,293
Additive Manufacturing of Ceramics: Issues, Potentialities, and Opportunities
Zocca, A., Colombo, P., Gomes, C. M., & Günster, J. (2015) · Journal of the American Ceramic Society · doi:10.1111/jace.13700 · Cited by 1,115
Additive Manufacturing of Ceramic‐Based Materials
Travitzky, N., Bonet, A., Dermeik, B., Fey, T., Filbert‐Demut, I., Schlier, L., Schlordt, T., & Greil, P. (2014) · Advanced Engineering Materials · doi:10.1002/adem.201400097 · Cited by 878
Metadata
- Authors
- Miranda, P., Pajares, A., Saiz, E., Tomsia, A. P., & Guiberteau, F.
- Venue
- Journal of Biomedical Materials Research Part A
- Publisher
- Wiley
- Published
- 2007-08-09
- Volume
- 85A
- Issue
- 1
- Pages
- 218-227
- ISSN
- 1549-3296 (ISSN-L)
- 1552-4965
- OpenAlex
- W2152082639
- Cited by
- 301
- References
- 44
- FWCI
- 3.89
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.