The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Degradation behavior of poly(glycerol sebacate)
Abstract
Poly(glycerol sebacate) (PGS), a promising scaffold material for soft tissue engineering applications, is a soft, tough elastomer with excellent biocompatibility. However, the rapid in vivo degradation rate of PGS limits its use as a scaffold material. To determine the impact of crosslink density on degradation rate, a family of PGS materials was synthesized by incrementally increasing the curing time from 42 to 144 h, at 120°C and 10 mTorr vacuum. As expected, PGS became a stiffer, tougher, and stronger elastomer with increasing curing time. PGS disks were subcutaneously implanted into rats and periodically harvested; only mild tissue responses were observed and the biocompatibility remained excellent. Regardless of crosslink density, surface erosion degradation was observed. The sample dimensions linearly decreased with implantation time, and the mass loss rates were constant after 1‐week implantation. As surface erosion degradation frequently correlates with enzymatic digestion, parallel in vitro digestion studies were conducted in lipase solutions which hydrolyze ester bonds. Enzymatic digestion played a significant role in degrading PGS, and the mass loss rates were not a function of curing time. Alternative chemistry approaches will be required to decrease the enzymatic hydrolysis rate of the ester bonds in PGS polymers. © 2008 Wiley Periodicals, Inc. J Biomed Mater Res, 2009
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A tough biodegradable elastomer
Wang, Y., Ameer, G. A., Sheppard, B. J., & Langer, R. (2002) · Nature Biotechnology · doi:10.1038/nbt0602-602 · Cited by 1,314
Cited by
25th Anniversary Article: Rational Design and Applications of Hydrogels in Regenerative Medicine
Annabi, N., Tamayol, A., Uquillas, J. A., Akbari, M., Bertassoni, L. E., Cha, C., Camci‐Unal, G., Dokmeci, M. R., Peppas, N. A., & Khademhosseini, A. (2014) · Advanced Materials · doi:10.1002/adma.201303233 · Cited by 1,409
Synthetic biodegradable functional polymers for tissue engineering: a brief review
Guo, B., & Ma, P. X. (2014) · Science China Chemistry · doi:10.1007/s11426-014-5086-y · Cited by 592
Elastomeric biomaterials for tissue engineering
Chen, Q., Liang, S., & Thouas, G. A. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.05.003 · Cited by 564
Highly Tunable Elastomeric Silk Biomaterials
Partlow, B. P., Hanna, C. W., Rnjak‐Kovacina, J., Moreau, J. E., Applegate, M. B., Burke, K. A., Marelli, B., Mitropoulos, A. N., Omenetto, F. G., & Kaplan, D. L. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201400526 · Cited by 432
An overview of the suitability of hydrogel-forming polymers for extrusion-based 3D-printing
Kirchmajer, D. M., Gorkin III, R., & in het Panhuis, M. (2015) · Journal of Materials Chemistry B · doi:10.1039/c5tb00393h · Cited by 337
Metadata
- Authors
- Pomerantseva, I., Krebs, N., Hart, A., Neville, C. M., Huang, A. Y., & Sundback, C. A.
- Venue
- Journal of Biomedical Materials Research Part A
- Publisher
- Wiley
- Published
- 2008-12-23
- Volume
- 91A
- Issue
- 4
- Pages
- 1038-1047
- ISSN
- 1549-3296 (ISSN-L)
- 1552-4965
- OpenAlex
- W2050995165
- Cited by
- 185
- References
- 1
- FWCI
- 2.13
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Degradation behavior of poly(glycerol sebacate). https://app.cochat.ai/papers/10.1002/jbm.a.32327
- The paper
- Pomerantseva, I., Krebs, N., Hart, A., Neville, C. M., Huang, A. Y., & Sundback, C. A. (2009). Degradation behavior of poly(glycerol sebacate). Journal of Biomedical Materials Research Part A. https://doi.org/10.1002/jbm.a.32327
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.