Biomimetic, bioactive etheric polyphosphazene‐poly(lactide‐co‐glycolide) blends for bone tissue engineering
The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
The long‐term goal of this work is to develop biomimetic polymer‐based systems for bone regeneration that both allow for neutral pH degradation products and have the ability to nucleate bonelike apatite. In this study, the etheric biodegradable polyphosphazene, poly[(50%ethyl glycinato)(50%methoxyethoxyethoxy)phosphazene] (PNEG 50 MEEP 50) was blended with poly(lactide‐co‐glycolide) PLAGA and studied their ability to produce high‐strength degradable biomaterials with bioactivity. Accordingly, two blends with weight ratios of PNEG 50 MEEP 50 to PLAGA 25:75 (BLEND25) and 50:50 (BLEND50) were fabricated using a mutual solvent approach. Increases in PNEG 50 MEEP 50 content in the blend system resulted in decreased elastic modulus of 779 MPa when compared with 1684 MPa (PLAGA) as well as tensile strength 7.9 MPa when compared with 25.7 MPa (PLAGA). However, the higher PNEG 50 MEEP 50 content in the blend system resulted in higher Ca/P atomic ratio of the apatite layer 1.35 (BLEND50) when compared with 0.69 (BLEND25) indicating improved biomimicry. Furthermore, these blends supported primary rat osteoblast adhesion and proliferation with an enhanced phenotypic expression when compared with PLAGA. These findings establish the suitability of PNEG 50 MEEP 50‐PLAGA biodegradable blends as promising bioactive materials for orthopedic applications. © 2009 Wiley Periodicals, Inc. J Biomed Mater Res, 2010
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Biomaterials in Tissue Engineering
Hubbell, J. A. (1995) · Nature Biotechnology · doi:10.1038/nbt0695-565 · Cited by 1,060
Use of polyphosphazenes for skeletal tissue regeneration
Laurencin, C. T., Norman, M. E., Elgendy, H. M., El‐Amin, S. F., Allcock, H. R., Pucher, S. R., & Ambrosio, A. A. (1993) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820270716 · Cited by 179 · cited 2×
“Furthermore, the glycine-based PPHOS have been shown to be highly osteocompatible for bone tissue engineering(15,16) and can provide hydrogen bonding sites when blended with PLAGA to achieve miscible systems with neutral degradation products and controlled degradation rates.(13,16,17,19,20) This study is focused on de…”
Self-citationAllcock, H. R., Pucher, S. R., Turner, M. L., & Fitzpatrick, R. J. (1992) · Macromolecules · doi:10.1021/ma00047a002 · Cited by 68
Self-citationThin layer grafts of Poly[bis(methoxyethoxy-ethoxy)-phosphazene] on organic polymer surfaces
Allcock, H. R., Fitzpatrick, R. J., Visscher, K., & Salvati, L. (1992) · Chemistry of Materials · doi:10.1021/cm00022a007 · Cited by 24 · cited 1×
“Radiation-induced grafting of poly [bis(2-(2-methoxyethoxy)ethoxy)phosphazene] (MEEP) on various polymer surfaces resulted in improved hydrophilicity.(23) Furthermore, PPHOS with methoxyethoxyethoxy side groups have shown minimal toxicities in vivo.”
BackgroundSelf-citation
Cited by
Biomaterials for Bone Regenerative Engineering
Yu, X., Tang, X., Gohil, S. V., & Laurencin, C. T. (2015) · Advanced Healthcare Materials · doi:10.1002/adhm.201400760 · Cited by 418
Self-citationBioerodible polyphosphazenes and their medical potential
Allcock, H. R., & Morozowich, N. L. (2012) · Polym. Chem. · doi:10.1039/c1py00468a · Cited by 152
Self-citationDeng, M., Kumbar, S. G., Nair, L. S., Weikel, A. L., Allcock, H. R., & Laurencin, C. T. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201100275 · Cited by 143
Self-citationDeng, M., Kumbar, S. G., Wan, Y., Toti, U. S., Allcock, H. R., & Laurencin, C. T. (2010) · Soft Matter · doi:10.1039/b926402g · Cited by 136
Self-citation
Metadata
- Authors
- Deng, M., Nair, L. S., Nukavarapu, S. P., Kumbar, S. G., Brown, J. L., Krogman, N. R., Weikel, A. L., Allcock, H. R., & Laurencin, C. T.
- Venue
- Journal of Biomedical Materials Research Part A
- Publisher
- Wiley
- Published
- 2009-01-22
- Volume
- 92A
- Issue
- 1
- Pages
- 114-125
- ISSN
- 1549-3296 (ISSN-L)
- 1552-4965
- OpenAlex
- W2010541659
- Cited by
- 49
- References
- 4
- FWCI
- 3.30
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.