The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Development of a 95/5 poly(L‐lactide‐co‐glycolide)/hydroxylapatite and β‐tricalcium phosphate scaffold as bone replacement material via selective laser sintering
Abstract
95/5 Poly(L‐lactide‐co‐glycolide) was investigated for the role of a porous scaffold, using the selective laser sintering (SLS) fabrication process, with powder sizes of 50–125 and 125–250 μm. SLS parameters of laser power, laser scan speed, and part bed temperature were altered and the degree of sintering was assessed by scanning electron microscope. Composites of the 125–250 β‐tricalcium phosphate (CAMCERAM® II) were sintered, and SLS settings using 40 wt % CAMCERAM® II were optimized for further tests. Polymer thermal degradation during processing led to a reduction in number and weight averaged molecular weight of 9% and 12%, respectively. Compression tests using the optimized composite sintering parameters gave a Young's modulus, yield strength, and strain at 1% strain offset of 0.13 ± 0.03 GPa, 12.06 ± 2.53 MPa, and 11.39 ± 2.60%, respectively. Porosity was found to be 46.5 ± 1.39%. CT data was used to create an SLS model of a human fourth middle phalanx and a block with designed porosity was fabricated to illustrate the process capabilities. The results have shown that this composite and fabrication method has potential in the fabrication of porous scaffolds for bone tissue engineering. © 2007 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 2008
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The compressive behavior of bone as a two-phase porous structure
Carter, D., & Hayes, W. (1977) · The Journal of Bone & Joint Surgery · doi:10.2106/00004623-197759070-00021 · Cited by 2,001
Dependence of yield strain of human trabecular bone on anatomic site
Morgan, E. F., & Keaveny, T. M. (2001) · Journal of Biomechanics · doi:10.1016/s0021-9290(01)00011-2 · Cited by 705
Cited by
Polymers for 3D Printing and Customized Additive Manufacturing
Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., & Mülhaupt, R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00074 · Cited by 3,741
Biomedical applications of biodegradable polymers
Ulery, B. D., Nair, L. S., & Laurencin, C. T. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22259 · Cited by 2,206
Additive Manufacturing of Ceramics: Issues, Potentialities, and Opportunities
Zocca, A., Colombo, P., Gomes, C. M., & Günster, J. (2015) · Journal of the American Ceramic Society · doi:10.1111/jace.13700 · Cited by 1,115
Polymeric materials for bone and cartilage repair
Puppi, D., Chiellini, F., Piras, A. M., & Chiellini, E. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.01.006 · Cited by 913
Laser sintering of polyamides and other polymers
Goodridge, R. D., Tuck, C. J., & Hague, R. J. M. (2012) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.04.001 · Cited by 835
Biofabrication: A Guide to Technology and Terminology
Moroni, L., Boland, T., Burdick, J. A., De Maria, C., Derby, B., Forgacs, G., Groll, J., Li, Q., Malda, J., Mironov, V. A., et al. (2018) · Trends in Biotechnology · doi:10.1016/j.tibtech.2017.10.015 · Cited by 636
Kundu, J., Shim, J.-H., Jang, J., Kim, S.-W., & Cho, D.-W. (2015) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.1682 · Cited by 552
Polymeric composites for powder-based additive manufacturing: Materials and applications
Yuan, S., Shen, F., Chua, C. K., & Zhou, K. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.11.001 · Cited by 525
Self-citationShor, L., Güçeri, S., Wen, X., Gandhi, M., & Sun, W. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.08.018 · Cited by 494
Selective laser sintering in biomedical engineering
Mazzoli, A. (2013) · Medical & Biological Engineering & Computing · doi:10.1007/s11517-012-1001-x · Cited by 469
Design and 3D Printing of Scaffolds and Tissues
An, J., Teoh, J. E. M., Suntornnond, R., & Chua, C. K. (2015) · Engineering · doi:10.15302/j-eng-2015061 · Cited by 461
Self-citationTauFactor: An open-source application for calculating tortuosity factors from tomographic data
Cooper, S. J., Bertei, A., Shearing, P. R., Kilner, J. A., & Brandon, N. P. (2016) · SoftwareX · doi:10.1016/j.softx.2016.09.002 · Cited by 429
Review: Development of clinically relevant scaffolds for vascularised bone tissue engineering
Liu, Y., Lim, J., & Teoh, S.-H. (2013) · Biotechnology Advances · doi:10.1016/j.biotechadv.2012.10.003 · Cited by 427
Duan, B., Wang, M., Zhou, W. Y., Cheung, W. L., Li, Z. Y., & Lu, W. W. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.06.024 · Cited by 420
A Review of Three-Dimensional Printing in Tissue Engineering
Sears, N. A., Seshadri, D. R., Dhavalikar, P. S., & Cosgriff-Hernandez, E. (2016) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2015.0464 · Cited by 360
Yeong, W. Y., Sudarmadji, N., Yu, H. Y., Chua, C. K., Leong, K. F., Venkatraman, S. S., Boey, Y. C. F., & Tan, L. P. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.12.033 · Cited by 355
Self-citationCurrent Progress in Bioactive Ceramic Scaffolds for Bone Repair and Regeneration
Gao, C., Deng, Y., Feng, P., Mao, Z., Li, P., Yang, B., Deng, J., Cao, Y., Shuai, C., & Peng, S. (2014) · International Journal of Molecular Sciences · doi:10.3390/ijms15034714 · Cited by 310
Bone regeneration performance of surface-treated porous titanium
Amin Yavari, S., van der Stok, J., Chai, Y. C., Wauthle, R., Tahmasebi Birgani, Z., Habibovic, P., Mulier, M., Schrooten, J., Weinans, H., & Zadpoor, A. A. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.04.054 · Cited by 297
Hajiali, F., Tajbakhsh, S., & Shojaei, A. (2018) · Polymer Reviews · doi:10.1080/15583724.2017.1332640 · Cited by 267
Polymeric drug delivery systems by additive manufacturing
Borandeh, S., van Bochove, B., Teotia, A., & Seppälä, J. (2021) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2021.03.022 · Cited by 254
Li, Y., Yang, W., Li, X., Zhang, X., Wang, C., Meng, X., Pei, Y., Fan, X., Lan, P., Wang, C., et al. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b00331 · Cited by 210
Tseng, H.-C., Chen, H.-Y., Huang, Y.-T., Lu, W.-Y., Chang, Y.-L., Chiang, M. Y., Lai, Y.-C., & Chen, H.-Y. (2016) · Inorganic Chemistry · doi:10.1021/acs.inorgchem.5b02590 · Cited by 42
Lu, W.-Y., Wu, K.-H., Chen, H.-Y., & Lin, C.-C. (2019) · Frontiers in Chemistry · doi:10.3389/fchem.2019.00189 · Cited by 5
“, 2008), bone replacement (Simpson et al., 2007), and tissue engineering (Place et al.”
Background
Metadata
- Authors
- Simpson, R. L., Wiria, F. E., Amis, A. A., Chua, C. K., Leong, K. F., Hansen, U. N., Chandrasekaran, M., & Lee, M. W.
- Venue
- Journal of Biomedical Materials Research Part B: Applied Biomaterials
- Publisher
- Wiley
- Published
- 2007-04-26
- Volume
- 84B
- Issue
- 1
- Pages
- 17-25
- ISSN
- 1552-4973 (ISSN-L)
- 1552-4981
- OpenAlex
- W1995230762
- Cited by
- 181
- References
- 2
- FWCI
- 5.26
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.