The DOI matches its Crossref record; 190 of the 190 references it cites were found in a registry or an index.
Polymeric drug delivery systems by additive manufacturing
Open accessAbstract
Additive manufacturing (AM) is gaining interests in drug delivery applications, offering innovative opportunities for the design and development of systems with complex geometry and programmed controlled release profile. In addition, polymer-based drug delivery systems can improve drug safety, efficacy, patient compliance, and are the key materials in AM. Therefore, combining AM and polymers can be beneficial to overcome the existing limitations in the development of controlled release drug delivery systems. Considering these advantages, here we are focusing on the recent developments in the field of polymeric drug delivery systems prepared by AM. This review provides a comprehensive overview on a holistic polymer-AM perspective for drug delivery systems with discussion on the materials, properties, design and fabrication techniques and the mechanisms used to achieve a controlled release system. The current challenges and future perspectives for personalized medicine and clinical use of these systems are also briefly discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Mechanisms of solute release from porous hydrophilic polymers
Korsmeyer, R. W., Gurny, R., Doelker, E., Buri, P., & Peppas, N. A. (1983) · International Journal of Pharmaceutics · doi:10.1016/0378-5173(83)90064-9 · Cited by 5,258
Poly Lactic-co-Glycolic Acid (PLGA) as Biodegradable Controlled Drug Delivery Carrier
Makadia, H. K., & Siegel, S. J. (2011) · Polymers · doi:10.3390/polym3031377 · Cited by 4,816 · cited 1×
“PLGA is an aliphatic polyester that is formed through the copolymerization of lactic and glycolic acid monomers to yield different formulations depending on their copolymer composition [174].”
BackgroundThe return of a forgotten polymer—Polycaprolactone in the 21st century
Woodruff, M. A., & Hutmacher, D. W. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.04.002 · Cited by 4,033
Statistical Mechanics of Cross-Linked Polymer Networks II. Swelling
Flory, P. J., & Rehner, J. (1943) · The Journal of Chemical Physics · doi:10.1063/1.1723792 · Cited by 3,865
Strategies in the design of nanoparticles for therapeutic applications
Petros, R. A., & DeSimone, J. M. (2010) · Nature Reviews Drug Discovery · doi:10.1038/nrd2591 · Cited by 3,651
Farah, S., Anderson, D. G., & Langer, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.012 · Cited by 3,443
A review on stereolithography and its applications in biomedical engineering
Melchels, F. P. W., Feijen, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.050 · Cited by 2,457
Statistical Mechanics of Cross-Linked Polymer Networks I. Rubberlike Elasticity
Flory, P. J., & Rehner, J. (1943) · The Journal of Chemical Physics · doi:10.1063/1.1723791 · Cited by 2,421
Anisotropic material properties of fused deposition modeling ABS
Ahn, S., Montero, M., Odell, D., Roundy, S., & Wright, P. K. (2002) · Rapid Prototyping Journal · doi:10.1108/13552540210441166 · Cited by 2,382
Continuous liquid interface production of 3D objects
Tumbleston, J. R., Shirvanyants, D., Ermoshkin, N., Janusziewicz, R., Johnson, A. R., Kelly, D., Chen, K., Pinschmidt, R., Rolland, J. P., Ermoshkin, A., et al. (2015) · Science · doi:10.1126/science.aaa2397 · Cited by 2,278
Research works printed but not linked: 21
- Luebbert, 2017, Moisture-induced phase separation and recrystallization in amorphous solid dispersions, Int. J. Pharm., 532, 635, 10.1016/j.ijpharm.2017.08.121 · doi:10.1016/j.ijpharm.2017.08.121
- Kogermann, 2013, Dissolution testing of amorphous solid dispersions, Int. J. Pharm., 444, 40, 10.1016/j.ijpharm.2013.01.042 · doi:10.1016/j.ijpharm.2013.01.042
- J.H. Richards, The Role of Polymer Permeability in the Control of Drug Release, in: Polym. Permeability, Springer Netherlands, Dordrecht, 1985, pp. 217–267. https://doi.org/10.1007/978-94-009-4858-7_6. · doi:10.1007/978-94-009-4858-7_6
- Hakala, 2013, Hydrolysis behaviour of crosslinked poly(ester anhydride) networks prepared from functionalised poly(ε-caprolactone) precursors, React. Funct. Polym., 73, 11, 10.1016/j.reactfunctpolym.2012.10.002 · doi:10.1016/j.reactfunctpolym.2012.10.002
- Rich, 2009, Porous Biodegradable Scaffold: Predetermined Porosity by Dissolution of Poly(ester-anhydride) Fibers from Polyester Matrix, Macromol. Biosci., 9, 654, 10.1002/mabi.200800306 · doi:10.1002/mabi.200800306
- Asikainen, 2019, Hydrolysis and drug release from poly(ethylene glycol)-modified lactone polymers with open porosity, Eur. Polym. J., 113, 165, 10.1016/j.eurpolymj.2019.01.056 · doi:10.1016/j.eurpolymj.2019.01.056
- Mönkäre, 2008, Controlled drug release from crosslinked poly(ester-anhydrides), Eur. J. Pharm. Sci., 34, S35, 10.1016/j.ejps.2008.02.098 · doi:10.1016/j.ejps.2008.02.098
- Petretta, 2019, 3D printing of musculoskeletal tissues: impact on safety and health at work, J. Toxicol. Environ. Heal. Part A., 82, 891, 10.1080/15287394.2019.1663458 · doi:10.1080/15287394.2019.1663458
- Dores, 2020, Temperature and solvent facilitated extrusion based 3D printing for pharmaceuticals, Eur. J. Pharm. Sci., 152, 10.1016/j.ejps.2020.105430 · doi:10.1016/j.ejps.2020.105430
- Rycerz, 2019, Embedded 3D Printing of Novel Bespoke Soft Dosage Form Concept for Pediatrics, Pharmaceutics., 11, 630, 10.3390/pharmaceutics11120630 · doi:10.3390/pharmaceutics11120630
- Melchels, 2010, Photo-Cross-Linked Poly(DL-lactide)-Based Networks. Structural Characterization by HR-MAS NMR Spectroscopy and Hydrolytic Degradation Behavior, Macromolecules, 43, 8570, 10.1021/ma1011705 · doi:10.1021/ma1011705
- Karakurt, 2020, Stereolithography (SLA) 3D printing of ascorbic acid loaded hydrogels: A controlled release study, Int. J. Pharm., 584, 10.1016/j.ijpharm.2020.119428 · doi:10.1016/j.ijpharm.2020.119428
- Jansen, 2012, Photo-crosslinked networks prepared from fumaric acid monoethyl ester-functionalized poly(d, l-lactic acid) oligomers and N-vinyl-2-pyrrolidone for the controlled and sustained release of proteins, Acta Biomater., 8, 3652, 10.1016/j.actbio.2012.06.011 · doi:10.1016/j.actbio.2012.06.011
- Gu, 2007, Maintenance of vascular endothelial growth factor and potentially other therapeutic proteins bioactivity during a photo-initiated free radical cross-linking reaction forming biodegradable elastomers, Eur. J. Pharm. Biopharm., 66, 21, 10.1016/j.ejpb.2006.08.006 · doi:10.1016/j.ejpb.2006.08.006
- van Bochove, 2019, Multiscale Structural Characterization of Biocompatible Poly(trimethylene carbonate) Photoreticulated Networks, ACS Appl. Polym. Mater., 1, 1811, 10.1021/acsapm.9b00338 · doi:10.1021/acsapm.9b00338
- Low, 2001, Characterization of SLS parts for drug delivery devices, Rapid Prototyp. J., 7, 262, 10.1108/13552540110410468 · doi:10.1108/13552540110410468
- I.C.C. de Moraes Porto, Polymerization, InTech, 2012. https://doi.org/10.5772/2750. · doi:10.5772/2750
- Becher, 2006, Pattern of cell death after in vitro exposure to GDMA, TEGDMA, HEMA and two compomer extracts, Dent. Mater., 22, 630, 10.1016/j.dental.2005.05.013 · doi:10.1016/j.dental.2005.05.013
- Tan, 2004, Nanoscale Compression of Polymer Microspheres by Atomic Force Microscopy, Langmuir, 20, 7015, 10.1021/la049597c · doi:10.1021/la049597c
- D. Cellulosics, ETHOCEL™: Ethylcellulose polymers technical handbook, TDC Co. (Ed.), Dow Cellul. (2005) 28.
- Homaee Borujeni, 2020, Three-dimensional (3D) printed tablets using ethyl cellulose and hydroxypropyl cellulose to achieve zero order sustained release profile, Cellulose, 27, 1573, 10.1007/s10570-019-02881-4 · doi:10.1007/s10570-019-02881-4
Cited by
Noureen, S., Noreen, S., Batool, F., Ghumman, S. A., Hasan, S., Aslam, S., & Ahmed, N. (2026) · RSC Pharmaceutics · doi:10.1039/d5pm00263j
Metadata
- Authors
- Borandeh, S., van Bochove, B., Teotia, A., & Seppälä, J.
- Venue
- Advanced Drug Delivery Reviews
- Publisher
- Elsevier BV
- Published
- 2021-06
- Volume
- 173
- Pages
- 349-373
- ISSN
- 0169-409X (ISSN-L)
- OpenAlex
- W3145467218
- Cited by
- 254
- References
- 190
- FWCI
- 3.24
- Type
- journal article
- Language
- en
- Open access
- hybrid
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- www.elsevier.com/legal/tdmrep-license (tdm)
- creativecommons.org/licenses/by-nc-nd/4.0/ (vor)
- Funders
- Suomen Akatemia
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Polymeric drug delivery systems by additive manufacturing. https://app.cochat.ai/papers/10.1016/j.addr.2021.03.022
- The paper
- Borandeh, S., van Bochove, B., Teotia, A., & Seppälä, J. (2021). Polymeric drug delivery systems by additive manufacturing. Advanced Drug Delivery Reviews. https://doi.org/10.1016/j.addr.2021.03.022
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.