The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Review and the state of the art: Sol–gel and melt quenched bioactive glasses for tissue engineering
Abstract
Biomaterial development is currently the most active research area in the field of biomedical engineering. The bioglasses possess immense potential for being the ideal biomaterials due to their high adaptiveness to the biological environment as well as tunable properties. Bioglasses like 45S5 has shown great clinical success over the past 10 years. The bioglasses like 45S5 were prepared using melt‐quenching techniques but recently porous bioactive glasses have been derived through sol–gel process. The synthesis route exhibits marked effect on the specific surface area, as well as degradability of the material. This article is an attempt to provide state of the art of the sol–gel and melt quenched bioactive bioglasses for tissue regeneration. Fabrication routes for bioglasses suitable for bone tissue engineering are highlighted and the effect of these fabrication techniques on the porosity, pore‐volume, mechanical properties, cytocompatibilty and especially apatite layer formation on the surface of bioglasses is analyzed in detail. Drug delivery capability of bioglasses is addressed shortly along with the bioactivity of mesoporous glasses. © 2015 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 104B: 1248–1275, 2016.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sing, K. S. W. (1985) · Pure and Applied Chemistry · doi:10.1351/pac198557040603 · Cited by 24,485
Drug Delivery Systems: Entering the Mainstream
Allen, T. M., & Cullis, P. R. (2004) · Science · doi:10.1126/science.1095833 · Cited by 4,552
Bone Compressive Strength: The Influence of Density and Strain Rate
Carter, D. R., & Hayes, W. C. (1976) · Science · doi:10.1126/science.996549 · Cited by 709
Tetracyclines: Antibiotic action, uptake, and resistance mechanisms
Schnappinger, D., & Hillen, W. (1996) · Archives of Microbiology · doi:10.1007/s002030050339 · Cited by 484
Cited by
Review on titanium and titanium based alloys as biomaterials for orthopaedic applications
Kaur, M., & Singh, K. (2019) · Materials Science and Engineering: C · doi:10.1016/j.msec.2019.04.064 · Cited by 1,451
Regenerating bone with bioactive glass scaffolds: A review of in vivo studies in bone defect models
El-Rashidy, A. A., Roether, J. A., Harhaus, L., Kneser, U., & Boccaccini, A. R. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.08.030 · Cited by 660
Effect of the nano/microscale structure of biomaterial scaffolds on bone regeneration
Zhu, L., Luo, D., & Liu, Y. (2020) · International Journal of Oral Science · doi:10.1038/s41368-020-0073-y · Cited by 458
Kaur, G., Kumar, V., Baino, F., Mauro, J. C., Pickrell, G., Evans, I., & Bretcanu, O. (2019) · Materials Science and Engineering: C · doi:10.1016/j.msec.2019.109895 · Cited by 330
Self-citationPiri-Moghadam, H., Alam, M. N., & Pawliszyn, J. (2017) · Analytica Chimica Acta · doi:10.1016/j.aca.2017.05.035 · Cited by 317
Metadata
- Authors
- Kaur, G., Pickrell, G., Sriranganathan, N., Kumar, V., & Homa, D.
- Venue
- Journal of Biomedical Materials Research Part B: Applied Biomaterials
- Publisher
- Wiley
- Published
- 2015-06-09
- Volume
- 104
- Issue
- 6
- Pages
- 1248-1275
- ISSN
- 1552-4973 (ISSN-L)
- 1552-4981
- OpenAlex
- W1933549177
- Cited by
- 214
- References
- 4
- FWCI
- 8.18
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Review and the state of the art: Sol–gel and melt quenched bioactive glasses for tissue engineering. https://app.cochat.ai/papers/10.1002/jbm.b.33443
- The paper
- Kaur, G., Pickrell, G., Sriranganathan, N., Kumar, V., & Homa, D. (2016). Review and the state of the art: Sol–gel and melt quenched bioactive glasses for tissue engineering. Journal of Biomedical Materials Research Part B: Applied Biomaterials. https://doi.org/10.1002/jbm.b.33443
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.