CoChat

Adsorption of selected environmentally important metals by poultry manure‐based granular activated carbons

Open access
Lima, Isabel M, Marshall, Wayne E · 2005 · Journal of Chemical Technology & Biotechnology
Cited by 72

The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.

Abstract

Water quality and public health impacts of mass produced poultry manure have prompted the need for viable conversion and reuse solutions. Conversion of poultry manure to value‐added granular activated carbons for environmental remediation can be such a solution. The objective of this study was to compare the effectiveness of poultry manure‐based carbons for the adsorption of selected metal ions (copper, cadmium, nickel, zinc) from solutions containing individual ions or the four metal ions present together. Adsorption properties for poultry manure‐based carbons were compared with those of two commercial carbons, PŪR RF and Minotaur, and carbons from three traditional precursors, coal, coconut and wood. Pelletized samples were pyrolyzed at 700 °C for 1 h followed by 800 °C steam activation at 1, 3 and 5 mL min−1 water flow rate, for 30 and 45 min, under nitrogen. The carbon's ability to adsorb the metals was influenced by the activation strategy, increasing for longer activation times and higher water flow rates, in the presence of a single metal solution. Saturation conditions were achieved at 20 m M and, at 5 m M, almost all metal ion in solution was adsorbed, except for nickel. Carbons showed similar affinity towards copper, cadmium and zinc, individually. However, when in competition, at 5 m M of each metal, manure‐based carbons showed a preference for Cu 2+ followed by Zn 2+ and Cd 2+. Poultry manure‐based carbons outperformed all reference carbons and PŪR RF, and, except for Ni 2+, Minotaur was also outperformed. Experiments showed that the highest removal rate in a competition situation was obtained for broiler‐cake carbon activated for 45 min at 3 mL min−1, with 93.1%, 50.9% and 85.2% for copper, cadmium and zinc ions, respectively. Published in 2005 for SCI by John Wiley & Sons, Ltd.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1002/jctb.1283

Cites

1 of 1 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cited by

Metadata

Authors
Lima, I. M., & Marshall, W. E.
Venue
Journal of Chemical Technology & Biotechnology
Publisher
Wiley
Published
2005-05-04
Volume
80
Issue
9
Pages
1054-1061
ISSN
  • 0142-0356 (ISSN-L)
  • 0268-2575
  • 1097-4660
OpenAlex
W2004589276
Cited by
72
References
1
FWCI
1.83
Type
journal article
Language
en
Open access
hybrid

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.