The DOI matches its Crossref record; 59 of the 59 references it cites were found in a registry or an index.
Integrated furfural production as a renewable fuel and chemical platform from lignocellulosic biomass
Abstract
Furfural is a natural precursor to furan‐based chemicals and has the potential to become a major renewable platform chemical for the production of biochemicals and biofuels. However, current industrial furfural production relies on relatively old and inefficient strategies that have hindered its capacity, and low production yields have strongly diminished its competitiveness with petroleum‐based alternatives in the global market. This mini‐review provides a critical analysis of past and current progress to enhance furfural production from lignocellulosic biomass. First, important chemical and fuel products derived from the catalytic conversion of furfural are outlined. We then discuss the importance of developing integrated production strategies to co‐produce furfural with other valuable chemicals. Furfural formation and loss chemistries are explored to understand effective methods to improve furfural yields from pentosans. Finally, selected relevant commercial and academic technologies that promise to improve lignocellulosic furfural production are discussed. © 2013 Society of Chemical Industry
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hydrolysis of lignocellulosic materials for ethanol production: a review
Sun, Y., & Cheng, J. (2002) · Bioresource Technology · doi:10.1016/s0960-8524(01)00212-7 · Cited by 6,070
Chemical Routes for the Transformation of Biomass into Chemicals
Corma, A., Iborra, S., & Velty, A. (2007) · Chemical Reviews · doi:10.1021/cr050989d · Cited by 5,970
Werpy, T., & Petersen, G. (2004) · doi:10.2172/15008859 · Cited by 3,201
Nimz, H. H. (1984) · Holz als Roh- und Werkstoff · doi:10.1007/bf02608943 · Cited by 2,761
Production of dimethylfuran for liquid fuels from biomass-derived carbohydrates
Román-Leshkov, Y., Barrett, C. J., Liu, Z. Y., & Dumesic, J. A. (2007) · Nature · doi:10.1038/nature05923 · Cited by 2,259
Production of Liquid Alkanes by Aqueous-Phase Processing of Biomass-Derived Carbohydrates
Huber, G. W., Chheda, J. N., Barrett, C. J., & Dumesic, J. A. (2005) · Science · doi:10.1126/science.1111166 · Cited by 1,678
Furfural—A Promising Platform for Lignocellulosic Biofuels
Lange, J., van der Heide, E., van Buijtenen, J., & Price, R. (2012) · ChemSusChem · doi:10.1002/cssc.201100648 · Cited by 1,323
Chheda, J. N., Román-Leshkov, Y., & Dumesic, J. A. (2007) · Green Chem. · doi:10.1039/b611568c · Cited by 1,175
How biotech can transform biofuels
Lynd, L. R., Laser, M. S., Bransby, D., Dale, B. E., Davison, B., Hamilton, R., Himmel, M., Keller, M., McMillan, J. D., Sheehan, J., et al. (2008) · Nature Biotechnology · doi:10.1038/nbt0208-169 · Cited by 1,121
Self-citationSaeman, J. F. (1945) · Industrial & Engineering Chemistry · doi:10.1021/ie50421a009 · Cited by 811
Cited by
Furfural: A Promising Platform Compound for Sustainable Production of C4 and C5 Chemicals
Li, X., Jia, P., & Wang, T. (2016) · ACS Catalysis · doi:10.1021/acscatal.6b01838 · Cited by 834
A review on commercial-scale high-value products that can be produced alongside cellulosic ethanol
Rosales-Calderon, O., & Arantes, V. (2019) · Biotechnology for Biofuels · doi:10.1186/s13068-019-1529-1 · Cited by 503
A critical review of pretreatment technologies to enhance anaerobic digestion and energy recovery
Atelge, M. R., Atabani, A. E., Banu, J. R., Krisa, D., Kaya, M., Eskicioglu, C., Kumar, G., Lee, C., Yildiz, Y. Ş., Unalan, S., et al. (2020) · Fuel · doi:10.1016/j.fuel.2020.117494 · Cited by 433
Ionic liquid based pretreatment of lignocellulosic biomass for enhanced bioconversion
Usmani, Z., Sharma, M., Gupta, P., Karpichev, Y., Gathergood, N., Bhat, R., & Gupta, V. K. (2020) · Bioresource Technology · doi:10.1016/j.biortech.2020.123003 · Cited by 404
Li, H., Riisager, A., Saravanamurugan, S., Pandey, A., Sangwan, R. S., Yang, S., & Luque, R. (2018) · ACS Catalysis · doi:10.1021/acscatal.7b02577 · Cited by 383
Liu, C., Li, B., Du, H., Lv, D., Zhang, Y., Yu, G., Mu, X., & Peng, H. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.06.025 · Cited by 382
Chemical conversion pathways for carbohydrates
Chatterjee, C., Pong, F., & Sen, A. (2015) · Green Chemistry · doi:10.1039/c4gc01062k · Cited by 359
Bio-based products from xylan: A review
Naidu, D. S., Hlangothi, S. P., & John, M. J. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.09.064 · Cited by 347
Chemicals from Biomass: A Market Assessment of Bioproducts with Near-Term Potential
Biddy, M. J., Scarlata, C., & Kinchin, C. (2016) · doi:10.2172/1244312 · Cited by 294
Efficient valorization of biomass to biofuels with bifunctional solid catalytic materials
Li, H., Fang, Z., Smith, R. L., & Yang, S. (2016) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2016.04.004 · Cited by 284
Furfural production using ionic liquids: A review
Peleteiro, S., Rivas, S., Alonso, J. L., Santos, V., & Parajó, J. C. (2016) · Bioresource Technology · doi:10.1016/j.biortech.2015.12.017 · Cited by 274
Tang, X., Zeng, X., Li, Z., Hu, L., Sun, Y., Liu, S., Lei, T., & Lin, L. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.07.209 · Cited by 265
A review on solvent systems for furfural production from lignocellulosic biomass
Lee, C. B. T. L., & Wu, T. Y. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110172 · Cited by 258
Preparation of cellulose nanomaterials via cellulose oxalates
Henschen, J., Li, D., & Ek, M. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.02.056 · Cited by 135
Chen, X., Zhang, K., Xiao, L.-P., Sun, R.-C., & Song, G. (2020) · Biotechnology for Biofuels · doi:10.1186/s13068-019-1644-z · Cited by 72
Biochar as a catalytic material for the production of 1,4-butanediol and tetrahydrofuran from furan
Lee, Y., Kim, Y. T., Kwon, E. E., & Lee, J. (2020) · Environmental Research · doi:10.1016/j.envres.2020.109325 · Cited by 49
Salaghi, A., Putra, A. S., Rizaluddin, A. T., Kajiyama, M., & Ohi, H. (2019) · Journal of Wood Science · doi:10.1186/s10086-019-1785-5 · Cited by 18
Metadata
- Authors
- Cai, C. M., Zhang, T., Kumar, R., & Wyman, C. E.
- Venue
- Journal of Chemical Technology & Biotechnology
- Publisher
- Wiley
- Published
- 2013-08-09
- Volume
- 89
- Issue
- 1
- Pages
- 2-10
- ISSN
- 0142-0356 (ISSN-L)
- 0268-2575
- 1097-4660
- OpenAlex
- W1903785705
- Cited by
- 482
- References
- 59
- FWCI
- 13.99
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.