The DOI matches its Crossref record; 26 of the 26 references it cites were found in a registry or an index.
Comparative study of the intrinsic mechanical properties of the human acetabular and femoral head cartilage
Abstract
Biphasic creep indentation methodology and an automated indentation apparatus were used to measure the aggregate modulus, Poisson's ratio, permeability, thickness, creep and recovery equilibrium times, and percentage of recovery of normal articular cartilage in 10 human hip joints. These properties were mapped regionally to examine the mechanical factors involved in the development of site‐specific degenerative lesions in the acetabulum and femoral head. The results indicate that there are significant differences between these properties regionally in the acetabulum and femoral head and between the two anatomical structures. Specifically, it was found that cartilage in the superomedial aspect of the femoral head has a 41% larger aggregate modulus than its anatomically corresponding articulating surface in the acetabulum. In addition, the supermedial aspect of the femoral head has the greates aggregate modulus (1.816 MPa) within the hip joint. During sitting, the inferior portion of the femoral head is in contact with the anterior acetabulum, and the anterior acetabulum has a 53% greater aggregate modulus than the inferior femoral head. This area below the fovea on the femoral head has the least aggregate modulus (0.814 MPa) within the hip joint. These mismatches in the compressive modulus of opposing articulating surfaces may contribute to degeneration of cartilage in the superomedial acetabulum and the inferior femoral head. Our findings support the clinical observation that these areas are frequent sites of early degeneration.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Biphasic Creep and Stress Relaxation of Articular Cartilage in Compression: Theory and Experiments
Mow, V. C., Kuei, S. C., Lai, W. M., & Armstrong, C. G. (1980) · Journal of Biomechanical Engineering · doi:10.1115/1.3138202 · Cited by 2,444
Armstrong, C. G., & Mow, V. C. (1982) · The Journal of Bone & Joint Surgery · doi:10.2106/00004623-198264010-00013 · Cited by 770
Interspecies comparisons of in situ intrinsic mechanical properties of distal femoral cartilage
Athanasiou, K. A., Rosenwasser, M. P., Buckwalter, J. A., Malinin, T. I., & Mow, V. C. (1991) · Journal of Orthopaedic Research · doi:10.1002/jor.1100090304 · Cited by 750
Self-citationBiphasic indentation of articular cartilage—II. A numerical algorithm and an experimental study
Mow, V. C., Gibbs, M. C., Lai, W. M., Zhu, W. B., & Athanasiou, K. A. (1989) · Journal of Biomechanics · doi:10.1016/0021-9290(89)90069-9 · Cited by 509
Self-citationBiphasic indentation of articular cartilage—I. Theoretical analysis
Mak, A. F., Lai, W. M., & Mow, V. C. (1987) · Journal of Biomechanics · doi:10.1016/0021-9290(87)90036-4 · Cited by 478
KEMPSON, G., MUIR, H., POLLARD, C., & TUKE, M. (1973) · Biochimica et Biophysica Acta (BBA) - General Subjects · doi:10.1016/0304-4165(73)90093-7 · Cited by 453
A biomechanical investigation of the human hip
Crowninshield, R. D., Johnston, R. C., Andrews, J. G., & Brand, R. A. (1978) · Journal of Biomechanics · doi:10.1016/0021-9290(78)90045-3 · Cited by 448
OSTEOARTHRITIS OF THE HIP: A STUDY OF THE NATURE AND EVOLUTION OF THE DISEASE
Harrison, M. H. M., Schajowicz, F., & Trueta, J. (1953) · The Journal of Bone and Joint Surgery. British volume · doi:10.1302/0301-620x.35b4.598 · Cited by 414
THE PERMEABILITY OF ARTICULAR CARTILAGE
Maroudas, A., Bullough, P., Swanson, S. A. V., & Freeman, M. A. R. (1968) · The Journal of Bone and Joint Surgery. British volume · doi:10.1302/0301-620x.50b1.166 · Cited by 350
Contact pressures from an instrumented hip endoprosthesis.
Hodge, W. A., Carlson, K. L., Fijan, R. S., Burgess, R. G., Riley, P. O., Harris, W. H., & Mann, R. W. (1989) · The Journal of Bone & Joint Surgery · doi:10.2106/00004623-198971090-00015 · Cited by 335
Cited by
Moutos, F. T., Freed, L. E., & Guilak, F. (2007) · Nature Materials · doi:10.1038/nmat1822 · Cited by 738
Reinforcement of hydrogels using three-dimensionally printed microfibres
Visser, J., Melchels, F. P. W., Jeon, J. E., van Bussel, E. M., Kimpton, L. S., Byrne, H. M., Dhert, W. J. A., Dalton, P. D., Hutmacher, D. W., & Malda, J. (2015) · Nature Communications · doi:10.1038/ncomms7933 · Cited by 718
Biomaterials for articular cartilage tissue engineering: Learning from biology
Armiento, A. R., Stoddart, M. J., Alini, M., & Eglin, D. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.11.021 · Cited by 579
Injectable biodegradable materials for orthopedic tissue engineering
Temenoff, J. S., & Mikos, A. G. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00108-3 · Cited by 554
Rational design of hydrogels for tissue engineering: Impact of physical factors on cell behavior
Brandl, F., Sommer, F., & Goepferich, A. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2006.09.017 · Cited by 496
Metadata
- Authors
- Athanasiou, K. A., Agarwal, A., & Dzida, F. J.
- Venue
- Journal of Orthopaedic Research
- Publisher
- Wiley
- Published
- 1994-05
- Volume
- 12
- Issue
- 3
- Pages
- 340-349
- ISSN
- 0736-0266 (ISSN-L)
- 1554-527X
- OpenAlex
- W2161067266
- Cited by
- 343
- References
- 26
- FWCI
- 7.00
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Comparative study of the intrinsic mechanical properties of the human acetabular and femoral head cartilage. https://app.cochat.ai/papers/10.1002/jor.1100120306
- The paper
- Athanasiou, K. A., Agarwal, A., & Dzida, F. J. (1994). Comparative study of the intrinsic mechanical properties of the human acetabular and femoral head cartilage. Journal of Orthopaedic Research. https://doi.org/10.1002/jor.1100120306
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.