An Overview of Polylactides as Packaging Materials
The DOI matches its Crossref record; 245 of the 245 references it cites were found in a registry or an index.
Abstract
Summary: Polylactide polymers have gained enormous attention as a replacement for conventional synthetic packaging materials in the last decade. By being truly biodegradable, derived from renewable resources and by providing consumers with extra end‐use benefits such as avoiding paying the “green tax” in Germany or meeting environmental regulations in Japan, polylactides (PLAs) are a growing alternative as a packaging material for demanding markets. The aim of this paper is to review the production techniques for PLAs, summarize the main properties of PLA and to delineate the main advantages and disadvantages of PLA as a polymeric packaging material. PLA films have better ultraviolet light barrier properties than low density polyethylene (LDPE), but they are slightly worse than those of cellophane, polystyrene (PS) and poly(ethylene terephthalate) (PET). PLA films have mechanical properties comparable to those of PET and better than those of PS. PLA also has lower melting and glass transition temperatures than PET and PS. The glass transition temperature of PLA changes with time. Humidity between 10 and 95% and storage temperatures of 5 to 40 °C do not have an effect on the transition temperature of PLA, which can be explained by its low water sorption values (i.e. <100 ppm at A w = 1). PLA seals well at temperatures below the melting temperature but an appreciable shrinking of the films has been noted when the material is sealed near its melting temperature. Solubility parameter predictions indicate that PLA will interact with nitrogen compounds, anhydrides and some alcohols and that it will not interact with aromatic hydrocarbons, ketones, esters, sulfur compounds or water. The CO 2 , O 2 and water permeability coefficients of PLA are lower than those of PS and higher than those of PET. Its barrier to ethyl acetate and D ‐limonene is comparable to PET. The amount of lactic acid and its derivatives that migrate to food simulant solutions from PLA is much lower than any of the current average dietary lactic acid intake values allowed by several governmental agencies. Thus, PLA is safe for use in fabricating articles for contact with food. Percent transmission versus wavelength for PLA(98% L ‐lactide), PS, LDPE, PET and cellophane films. image Percent transmission versus wavelength for PLA(98% L ‐lactide), PS, LDPE, PET and cellophane films.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“For the sustained delivery of bioactive compounds, LA and glycolic acid were already proposed as bioresorbable matrices in 1973 [89].”
From Resorbable Biomaterials Used for 3D Scaffolds in Tissue Engineering: A Review (2023) · cites this paper as [89]
In the citing paper
“However, the rate of the PLA crystallization is slow (Auras et al., 2004;Liu et al., 2014;Murariu et al., 2015;Zhang et al., 2018), frequently slower than the cooling rate used in common polymer processing devices (Zhang et al., 2018).”
From Phase Structure, Compatibility, and Toughness of PLA/PCL Blends: A Review (2019) · cites this paper as Auras et al., 2004
In the citing paper
“Therefore, commercial PLA's are semicrystalline with melting temperature, T m , between 140 and 180 • C in dependence on the enantiomeric purity (Fambri and Migliaresi, 2010) and glass transition temperature, T g , which usually ranges from 55 to 65 • C (Auras et al., 2004;Krishnan et al., 2016).”
From Phase Structure, Compatibility, and Toughness of PLA/PCL Blends: A Review (2019) · cites this paper as Auras et al., 2004
In the citing paper
“Some recent studies showed that, by adding bacteria and substrate-degrading enzymes for simultaneous saccharification and fermentation, starch or cellulosic biomass can be saccharified and simultaneously converted into lactic acid; this process can be used as a replacement for the above-mentioned traditional fermentation steps [28,29].”
From Synthesis and Biological Application of Polylactic Acid (2020) · cites this paper as [28]
In the citing paper
“The relative reactivity towards the monomers is important for the formation of block copolymers which are typically produced by sequential addition. [19]”
From Master of Chaos and Order: Opposite Microstructures of PCL‐co‐PGA‐co‐PLA Accessible by a Single Catalyst** (2022) · cites this paper as [19]
Citations
Cites
Items 201–245 of 245
Tsuji, H., & Ikada, Y. (1994) · Journal of Applied Polymer Science · doi:10.1002/app.1994.070530808 · Cited by 55
In vitro degradation and biocompatibility of poly(DL‐lactide‐ϵ‐caprolactone) nerve guides
Meek, M. F., Jansen, K., Steendam, R., Oeveren, W. V., van Wachem, P. B., & van Luyn, M. J. A. (2004) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.10157 · Cited by 55
General crystallization behaviour of poly(l-lactic acid) PLLA: 2. Eutectic crystallization of PLLA
Zwiers, R. J. M., Gogolewski, S., & Pennings, A. J. (1983) · Polymer · doi:10.1016/0032-3861(83)90128-3 · Cited by 55
Wang, G. B., Labow, R. S., & Santerre, J. P. (1997) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(19970905)36:3<407::aid-jbm16>3.0.co;2-a · Cited by 54
Poly(l-lactide) crosslinked with spiro-bis-dimethylene-carbonate
Grijpma, D. W., Kroeze, E., Nijenhuis, A. J., & Pennings, A. J. (1993) · Polymer · doi:10.1016/0032-3861(93)90868-b · Cited by 53
Effect of polymerization catalysts on the microstructure of P(L LA‐co‐εCL)
Choi, E., Park, J., & Chang, H. (1994) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.1994.090321505 · Cited by 53
Yoon, J., Lee, W.-S., Kim, K., Chin, I.-J., Kim, M.-N., & Kim, C. (2000) · European Polymer Journal · doi:10.1016/s0014-3057(99)00068-3 · Cited by 49
Inclusion Compound Formed between Poly(L-lactic acid) and Urea
Howe, C., Vasanthan, N., MacClamrock, C., Sankar, S. S., Shin, I. D., Simonsen, I. K., & Tonelli, A. E. (1994) · Macromolecules · doi:10.1021/ma00103a028 · Cited by 48
Degée, P., Dubois, P., & Jérôme, R. (1997) · Macromolecular Chemistry and Physics · doi:10.1002/macp.1997.021980624 · Cited by 47
Polyakova, A., Connor, D. M., Collard, D. M., Schiraldi, D. A., Hiltner, A., & Baer, E. (2001) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.1164 · Cited by 47
Isothermal melting behavior of poly(L‐lactic acid)
Kishore, K., Vasanthakumari, R., & Pennings, A. J. (1984) · Journal of Polymer Science: Polymer Physics Edition · doi:10.1002/pol.1984.180220401 · Cited by 45
Dunsing, R., & Kricheldorf, H. R. (1985) · Polymer Bulletin · doi:10.1007/bf00271605 · Cited by 45
Lactide polymerization faced with therapeutic application requirements
Vert, M. (2000) · Macromolecular Symposia · doi:10.1002/1521-3900(200003)153:1<333::aid-masy333>3.0.co;2-9 · Cited by 45
In vitro study on the drug release behavior from Polylactide‐based blend matrices
Cai, Q., Bei, J., & Wang, S. (2002) · Polymers for Advanced Technologies · doi:10.1002/pat.222 · Cited by 41
Blends of poly(ε‐caprolactone‐b‐lactic acid) and poly(lactic acid) for hot‐melt applications
Stolt, M., Viljanmaa, M., Södergård, A., & Törmälä, P. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.13216 · Cited by 40
Anionic and pseudoanionic polymerization of lactones ‐ a comparison
Kricheldorf, H. R., Kreiser‐Saunders, I., & Scharnagl, N. (1990) · Makromolekulare Chemie. Macromolecular Symposia · doi:10.1002/masy.19900320122 · Cited by 40
Urbanovici, E., Schneider, H. A., & Cantow, H. J. (1997) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/(sici)1099-0488(19970130)35:2<359::aid-polb12>3.0.co;2-h · Cited by 40
Kanchanasopa, M., Manias, E., & Runt, J. (2003) · Biomacromolecules · doi:10.1021/bm034063w · Cited by 37
Blom, H. P., Teh, J. W., & Rudin, A. (1998) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19981212)70:11<2081::aid-app2>3.0.co;2-4 · Cited by 37
Heterostereocomplexes Prepared from d-PLA and l-PLA and Leuprolide. II. Release of Leuprolide
Slager, J., & Domb, A. J. (2003) · Biomacromolecules · doi:10.1021/bm0300249 · Cited by 36
Comparative Biodegradation Study of Starch- and Polylactic Acid-Based Materials
Gattin, R., Copinet, A., Bertrand, C., & Couturier, Y. (2001) · Journal of Polymers and the Environment · doi:10.1023/a:1016036302871 · Cited by 34
Heterostereocomplexes Prepared from d-Poly(lactide) and Leuprolide. I. Characterization
Slager, J., & Domb, A. J. (2003) · Biomacromolecules · doi:10.1021/bm030023g · Cited by 34
Yamaoka, T., Takahashi, Y., Ohta, T., Miyamoto, M., Murakami, A., & Kimura, Y. (1999) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/(sici)1099-0518(19990515)37:10<1513::aid-pola13>3.0.co;2-9 · Cited by 34
Stridsberg, K., & Albertsson, A. (2000) · Polymer · doi:10.1016/s0032-3861(00)00084-7 · Cited by 33
Asano, M., Fukuzaki, H., Yoshida, M., Kumakura, M., Mashimo, T., Yuasa, H., Imai, K., Yamanaka, H., Kawaharada, U., & Suzuki, K. (1991) · International Journal of Pharmaceutics · doi:10.1016/0378-5173(91)90266-q · Cited by 31
Nucleation parameters for polymer crystallization from non-isothermal thermal analysis
Kishore, K., & Vasanthakumari, R. (1988) · Colloid & Polymer Science · doi:10.1007/bf01428808 · Cited by 29
Mallarde, D., Valière, M., David, C., Menet, M., & Guérin, P. (1998) · Polymer · doi:10.1016/s0032-3861(97)10172-0 · Cited by 28
Transmission of Light Through Pigmented Polyethylene Milk Bottles
Nelson, K. H., & Cathcart, W. M. (1984) · Journal of Food Protection · doi:10.4315/0362-028x-47.5.346 · Cited by 24
Superoxide dismutase activity of a novel macromolecular manganese porphyrin
Kawakami, H., Ohse, T., Kawano, M., & Nagaoka, S. (1999) · Polymers for Advanced Technologies · doi:10.1002/(sici)1099-1581(199905)10:5<282::aid-pat876>3.0.co;2-x · Cited by 23
ESR spectroscopy as a probe of the morphology of hydrogels and polymer-polymer blends
Pitt, C. G., Wang, J., Shah, S. S., Sik, R. H., & Chignell, C. F. (1993) · Macromolecules · doi:10.1021/ma00061a003 · Cited by 23
Synthesis of PDLLA homopolymers with different molecular weights
Xu, K., Kozluca, A., Denkbaş, E. B., & Pişkın, E. (1996) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19960118)59:3<561::aid-app23>3.0.co;2-v · Cited by 21
Earthworms and the Degradation of Lactic Acid–Based Stereocopolymers
Alauzet, N., Garreau, H., Bouché, M. B., & Vert, M. (2002) · Journal of Polymers and the Environment · doi:10.1023/a:1021074107803 · Cited by 18
Novel materials through stereocomplexation
Brizzolara, D., Cantow, H. ‐., M�lhaupt, R., & Domb, A. J. (1996) · Journal of Computer-Aided Materials Design · doi:10.1007/bf01185672 · Cited by 18
Abiotic and biotic degradation of aliphatic polyesters from “petro” versus “green” resources
Karlsson, S., & Albertsson, A. (1998) · Macromolecular Symposia · doi:10.1002/masy.19981270129 · Cited by 17
Release of ibuprofen from poly(ε‐caprolactone‐co‐ D,L ‐lactide) and simulation of the release
Ahola, N., Rich, J., Karjalainen, T., & Seppälä, J. V. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.11806 · Cited by 16
Chemical and microbial stability of fluid milk in response to packaging and dispensing
Erickson, M. C. (1997) · International Journal of Dairy Technology · doi:10.1111/j.1471-0307.1997.tb01748.x · Cited by 16
Novel block copolymers of 2-vinylpyridine and ɛ-caprolactone: Synthesis and characterization
Duivenvoorde, F. L., van Es, J. J. G. S., van Nostrum, C. F., & van der Linde, R. (2000) · Macromolecular Chemistry and Physics · doi:10.1002/(sici)1521-3935(20000301)201:6<662::aid-macp662>3.0.co;2-1 · Cited by 14
Polymeric Biomaterials Research
Ikada, Y. (1999) · Advanced Engineering Materials · doi:10.1002/(sici)1527-2648(199909)1:1<67::aid-adem67>3.0.co;2-e · Cited by 14
Eutectic crystallization of poly(l-lactic acid) and pentaerythrityl tetrabromide
Vasanthakumari, R. (1981) · Polymer · doi:10.1016/0032-3861(81)90256-1 · Cited by 13
Processing Biodegradable Natural Polyesters for Porous Soft-Materials
Chaput, C., Desrosiers, E. A., Assad, M. E. H., Brochu, M., Yahia, L., Selmani, A., & Rivard, C. (1995) · Springer eBooks · doi:10.1007/978-94-011-0157-8_16 · Cited by 7
Tsuji (2000) · doi:10.1002/1097-4628(20000815)77:7
Schmidt (2001) · doi:10.1002/1099-0488(20010201)39:3<300::aid-polb1002>3.0.co;2-m
Drumright, R. E., Gruber, P. R., & Henton, D. E. (2000) · Advanced Materials · doi:10.1002/1521-4095(200012)12:23<1841::aid-adma1841>3.0.co;2-e
(2001) · doi:10.1002/1521-3900(200110)175:1<55::aid-masy55>3.0.co;2-k
(1998) · doi:10.1002/(sici)1097-0126(199807)46:3<196::aid-pi914>3.0.co;2-y
Research works printed but not linked: 65
- Aluminum Association, 1999, Tokyo Steps up to Recycling Efforts
- Mochizuki M., 2002, Biopolymers. Polyesters III. Applications and Commercial Products, 1
- Tsuji H., 2002, Biopolymers. Polyesters III. Applications and Commercial Products, 129
- Gruber P. R., 2002, Biopolymers. Polyesters III. Applications and Commercial Products, 235
- Kawahima N., 2002, Biopolymers. Polyesters III. Applications and Commercial Products, 251
- 10.1111/j.1574-6976.1995.tb00168.x · doi:10.1111/j.1574-6976.1995.tb00168.x · Paper page
- N.Whiteman “2000 Polymers Laminations and Coatings Conference” Chicago IL2000 p.631–635.
- J. B.Snook M.Sc. Thesis Michigan State University East Lansing1994 p.130.
- Perego G., 1996, Polymer, 59, 37
- M. H.Hartmann N.Whiteman “TAPPI Polymers Laminations & Coatings Conference” Chicago IL United States2000 p.467–474.
- Leaversuch R. D., 2003, Plastics Technology
- Baillie J., 1997, Packag. Week, 13
- O'Brien M., 2003, Ilip Launches New Fresh Food Packaging Solution
- 2003, NatureWorks™ PLA Makes North American Commercial Debut in Grocery Stores Taking a Fresh Approach to Deli Packaging
- Kharas G. B., 1994, Plastics from Microbes, 93
- D. R.Witzke Ph.D. Thesis Michigan State University East Lansing MI1997 p.389.
- 10.1016/0032-3861(81)90256-1 · DOI
- 10.1016/0032-3861(95)93647-5 · DOI · Paper page
- Huang J., 1996, Polym. Prepr. (Am. Chem. Soc., Div. Polym. Chem.), 37, 370
- Rappard P., 1997, Packag. Rev. S. Afr., 23, 19
- Farrer K. T. H., 1983, Packag. News
- Dunkley W. L., 1963, Milk Dealer, 52, 52
- R.Auras Ph.D. Thesis Michigan State University East Lansing2004 p.268.
- VanKrevelen D. W., 1997, Properties of Polymers
- Ou X., 2003, ANTEC 2003, 1701
- Doi Y., 1994, Biodegradable Plastics and Polymers: Proceedings of the Third International Scientific Workshop on Biodegradable Plastics and Polymers, Osaka, Japan (Studies in Polymer Science, 12), 464
- J. R.Dorgan J.Randal J.Janzen D.Knauss B.Braun P.Gruber “Global Plastics Environmental Conference 2004” Detroit MI February 18–192004.
- Cargill‐Dow‐LLC, PLA Polymer 4042D – A NatureWorks Product. Biaxially Oriented Films – General Purpose
- D. M.Bigg “Annual Technical Conference – Society of Plastics Engineers” 1996 p.2028–2039.
- Barton A. F. M., 1999, Handbook of Solubility Parameters and Other Cohesion Parameters
- Hansen C. M., 1967, J. Paint Technol., 39, 511
- Rocha G., 1992, Polym. Prepr. (Am. Chem. Soc., Div. Polym. Chem.), 33, 454
- Pauly S., 1999, Polymer Handbook, 547
- Siparsky G. L., 1997, J. Environ. Polym. Degrad., 5, 125, 10.1007/bf02763656 · DOI · Paper page
- N.Whiteman P.DeLassus J.Gunderson “Polymers Laminations & Coatings Conference Proceeding Polyolefins 2002 International Conference on Polyolefins” Houston Texas USA February 24–27 2002.
- 10.1023/a:1021869530253 · doi:10.1023/a:1021869530253
- 10.1023/a:1021860301487 · doi:10.1023/a:1021860301487
- 10.1023/a:1022874530586 · doi:10.1023/a:1022874530586
- 10.1023/a:1022849813748 · doi:10.1023/a:1022849813748
- 10.1023/a:1021808317416 · DOI
- 10.1002/1097-4628(20000815)77:7<1452::aid-app7>3.0.co;2-s · doi:10.1002/1097-4628(20000815)77:7<1452::aid-app7>3.0.co;2-s
- 10.1016/0142-9612(90)90124-9 · DOI · Paper page
- 10.1023/a:1021812418325 · doi:10.1023/a:1021812418325
- 10.1002/app.11605 · DOI · Paper page
- 10.1023/a:1016036302871 · DOI
- R. G.Sinclair “The First Corn Utilization Conference” St. Louis Missouri June 11–12 1987 p.1–16.
- 10.1016/0032-3861(79)90009-0 · DOI · Paper page
- Park J. W., 1999, Korea Polym. J., 7, 93
- Kim H. S., 1998, Korea Polym. J., 6, 422
- 10.1016/0032-3861(96)83146-6 · DOI
- Farmaceutico S., 2003, Lactide/Glycolide Copolymers: Review on Toxicity, Biocompatibility, and Clinical Application (data up to 1999)
- Hartmann M. H., 1999, Polym. Prepr. (Am. Chem. Soc., Div. Polym. Chem.), 40, 570
- O'Brien M., 2003, Cargill Dow's World‐scale Manufacturing Facility Comes On Line
- O'Brien M., 2003, Biopolymer Industry Moves from Field of Dreams to Reality: Consumer Products Hitting Retail Shelves Across the Globe
- O'Brien M., 2003, First North American Converter Takes Aim at Grocery Industry with NatureWorks™ PLA
- O'Brien M., 2001, Unifi and Cargill Dow Provide Update on NatureWorks™ PLA Development, 2
- 2003, Faerch Plast to Market Food Packaging from Nature
- 2003, NatureWorks™ PLA Makes North American Commercial Debut in Grocery Stores Taking a Fresh Approach to Deli Packaging
- NatureWorks™ PLA, 2003, Top It Off With NatureWorks™ PLA. Dairy and Delicatessen Container Lidding Solutions
- 2003, Kanebo Corn Fiber
- Lunt J., 2003, Polylactic Acid Polymers from Corn: Potential Applications in the Textiles Industry
- Arai K., 2001, Biodegradable Lactide and Polyester Copolymers for use in Packaging and Their Film Properties
- Mohan A. M., 2002, Packag. Digest, 30, 34
- Nageroni J., 2001, Flexible Packag., 25
- Michael O. B., 2003, Ilip Launches New Fresh Food Packaging Solution
Cited by
The Path Forward for Biofuels and Biomaterials
Ragauskas, A. J., Williams, C. K., Davison, B. H., Britovsek, G., Cairney, J., Eckert, C. A., Frederick, W. J., Hallett, J. P., Leak, D. J., Liotta, C. L., et al. (2006) · Science · doi:10.1126/science.1114736 · Cited by 5,741
Farah, S., Anderson, D. G., & Langer, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.012 · Cited by 3,443
TEMPO-oxidized cellulose nanofibers
Isogai, A., Saito, T., & Fukuzumi, H. (2011) · Nanoscale · doi:10.1039/c0nr00583e · Cited by 3,179
Processing technologies for poly(lactic acid)
Lim, L.-T., Auras, R., & Rubino, M. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.05.004 · Cited by 2,766
Self-citationSustainable polymers from renewable resources
Zhu, Y., Romain, C., & Williams, C. K. (2016) · Nature · doi:10.1038/nature21001 · Cited by 2,762
Metadata
- Authors
- Auras, R., Harte, B., & Selke, S.
- Affiliations
- Michigan State University (US)
- Corresponding author
- Auras, Rafael
- Venue
- Macromolecular Bioscience
- Publisher
- Wiley
- Published
- 2004-08-24
- Volume
- 4
- Issue
- 9
- Pages
- 835-864
- ISSN
- 1616-5187 (ISSN-L)
- 1616-5195
- OpenAlex
- W2054432898
- Cited by
- 3,454
- References
- 240
- Citations by year
- 2026: 160 · 2025: 172 · 2024: 191 · 2023: 196 · 2022: 237 · 2021: 258 · 2020: 202 · 2019: 204 · 2018: 191 · 2017: 227 · 2016: 198 · 2015: 212 · 2014: 183 · 2013: 185 · 2012: 149
- FWCI
- 2.75
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Macromolecular Bioscience (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Biomaterials › Nanocomposite Films for Food Packaging
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Keywords
- polylactic acid, biodegradable packaging, PLA films, mechanical properties, glass transition temperature, water sorption, solubility parameter, gas permeability, barrier properties, food contact safety, bio-based polymers
- MeSH terms
- Biocompatible Materials, Biotechnology, Diffusion, Glass, Hot Temperature, Models, Chemical, Polyesters, Polymers, Solubility, Spectrophotometry, Temperature, Thermodynamics, Time Factors, Lactic Acid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.