The DOI matches its Crossref record; 245 of the 245 references it cites were found in a registry or an index.
An Overview of Polylactides as Packaging Materials
Abstract
Summary: Polylactide polymers have gained enormous attention as a replacement for conventional synthetic packaging materials in the last decade. By being truly biodegradable, derived from renewable resources and by providing consumers with extra end‐use benefits such as avoiding paying the “green tax” in Germany or meeting environmental regulations in Japan, polylactides (PLAs) are a growing alternative as a packaging material for demanding markets. The aim of this paper is to review the production techniques for PLAs, summarize the main properties of PLA and to delineate the main advantages and disadvantages of PLA as a polymeric packaging material. PLA films have better ultraviolet light barrier properties than low density polyethylene (LDPE), but they are slightly worse than those of cellophane, polystyrene (PS) and poly(ethylene terephthalate) (PET). PLA films have mechanical properties comparable to those of PET and better than those of PS. PLA also has lower melting and glass transition temperatures than PET and PS. The glass transition temperature of PLA changes with time. Humidity between 10 and 95% and storage temperatures of 5 to 40 °C do not have an effect on the transition temperature of PLA, which can be explained by its low water sorption values (i.e. <100 ppm at A w = 1). PLA seals well at temperatures below the melting temperature but an appreciable shrinking of the films has been noted when the material is sealed near its melting temperature. Solubility parameter predictions indicate that PLA will interact with nitrogen compounds, anhydrides and some alcohols and that it will not interact with aromatic hydrocarbons, ketones, esters, sulfur compounds or water. The CO 2 , O 2 and water permeability coefficients of PLA are lower than those of PS and higher than those of PET. Its barrier to ethyl acetate and D ‐limonene is comparable to PET. The amount of lactic acid and its derivatives that migrate to food simulant solutions from PLA is much lower than any of the current average dietary lactic acid intake values allowed by several governmental agencies. Thus, PLA is safe for use in fabricating articles for contact with food. Percent transmission versus wavelength for PLA(98% L ‐lactide), PS, LDPE, PET and cellophane films. image Percent transmission versus wavelength for PLA(98% L ‐lactide), PS, LDPE, PET and cellophane films.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“For the sustained delivery of bioactive compounds, LA and glycolic acid were already proposed as bioresorbable matrices in 1973 [89].”
From Resorbable Biomaterials Used for 3D Scaffolds in Tissue Engineering: A Review (2023) · cites this paper as [89]
In the citing paper
“However, the rate of the PLA crystallization is slow (Auras et al., 2004;Liu et al., 2014;Murariu et al., 2015;Zhang et al., 2018), frequently slower than the cooling rate used in common polymer processing devices (Zhang et al., 2018).”
From Phase Structure, Compatibility, and Toughness of PLA/PCL Blends: A Review (2019) · cites this paper as Auras et al., 2004
In the citing paper
“Therefore, commercial PLA's are semicrystalline with melting temperature, T m , between 140 and 180 • C in dependence on the enantiomeric purity (Fambri and Migliaresi, 2010) and glass transition temperature, T g , which usually ranges from 55 to 65 • C (Auras et al., 2004;Krishnan et al., 2016).”
From Phase Structure, Compatibility, and Toughness of PLA/PCL Blends: A Review (2019) · cites this paper as Auras et al., 2004
In the citing paper
“Some recent studies showed that, by adding bacteria and substrate-degrading enzymes for simultaneous saccharification and fermentation, starch or cellulosic biomass can be saccharified and simultaneously converted into lactic acid; this process can be used as a replacement for the above-mentioned traditional fermentation steps [28,29].”
From Synthesis and Biological Application of Polylactic Acid (2020) · cites this paper as [28]
In the citing paper
“The relative reactivity towards the monomers is important for the formation of block copolymers which are typically produced by sequential addition. [19]”
From Master of Chaos and Order: Opposite Microstructures of PCL‐co‐PGA‐co‐PLA Accessible by a Single Catalyst** (2022) · cites this paper as [19]
Citations
Cites
A Literature Review of Poly(Lactic Acid)
Garlotta, D. (2001) · Journal of Polymers and the Environment · doi:10.1023/a:1020200822435 · Cited by 3,707
Corrosion Mechanisms of Magnesium Alloys
Song, G. L., & Atrens, A. (1999) · Advanced Engineering Materials · doi:10.1002/(sici)1527-2648(199909)1:1<11::aid-adem11>3.0.co;2-n · Cited by 2,365
Fischer, E. W., Sterzel, H. J., & Wegner, G. (1973) · Kolloid-Zeitschrift und Zeitschrift für Polymere · doi:10.1007/bf01498927 · Cited by 1,704
Recent Developments in Ring Opening Polymerization of Lactones for Biomedical Applications
Albertsson, A.-C., & Varma, I. K. (2003) · Biomacromolecules · doi:10.1021/bm034247a · Cited by 1,582
Poly(lactic acid): plasticization and properties of biodegradable multiphase systems
Martin, O., & Avérous, L. (2001) · Polymer · doi:10.1016/s0032-3861(01)00086-6 · Cited by 1,562
Biodegradable polyesters for medical and ecological applications
Ikada, Y., & Tsuji, H. (2000) · Macromolecular Rapid Communications · doi:10.1002/(sici)1521-3927(20000201)21:3<117::aid-marc117>3.0.co;2-x · Cited by 1,512
Stereocomplex formation between enantiomeric poly(lactides)
Ikada, Y., Jamshidi, K., Tsuji, H., & Hyon, S. H. (1987) · Macromolecules · doi:10.1021/ma00170a034 · Cited by 1,409
Biodegradable polymers for use in surgery—polyglycolic/poly(actic acid) homo- and copolymers: 1
Gilding, D. K., & Reed, A. M. (1979) · Polymer · doi:10.1016/0032-3861(79)90009-0 · Cited by 1,345
Preparation and characterization of poly(l-lactic acid) foams
Mikos, A. G., Thorsen, A. J., Czerwonka, L. A., Bao, Y., Langer, R., Winslow, D. N., & Vacanti, J. P. (1994) · Polymer · doi:10.1016/0032-3861(94)90953-9 · Cited by 1,187
Applications of life cycle assessment to NatureWorks™ polylactide (PLA) production
Vink, E. T. H., Rábago, K. R., Glassner, D. A., & Gruber, P. R. (2003) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(02)00372-5 · Cited by 1,092
Hydrolytic degradation of devices based on poly(DL-lactic acid) size-dependence
Grizzi, I., Garreau, H., Li, S., & Vert, M. (1995) · Biomaterials · doi:10.1016/0142-9612(95)93258-f · Cited by 895
Crystal structure, conformation and morphology of solution-spun poly(L-lactide) fibers
Hoogsteen, W., Postema, A. R., Pennings, A. J., Ten Brinke, G., & Zugenmaier, P. (1990) · Macromolecules · doi:10.1021/ma00204a041 · Cited by 864
Handbook of Biodegradable Polymers
(1998) · CRC Press eBooks · doi:10.1201/9780367802219 · Cited by 702
Thermal characterization of polylactides
Jamshidi, K., Hyon, S.-H., & Ikada, Y. (1988) · Polymer · doi:10.1016/0032-3861(88)90116-4 · Cited by 692
Kister, G., Cassanas, G., & Vert, M. (1998) · Polymer · doi:10.1016/s0032-3861(97)00229-2 · Cited by 689
Technological and economic potential of poly(lactic acid) and lactic acid derivatives
Datta, R. (1995) · FEMS Microbiology Reviews · doi:10.1016/0168-6445(94)00055-4 · Cited by 640
A novel method to fabricate bioabsorbable scaffolds
Whang, K., Thomas, C. H., Healy, K. E., & Nuber, G. (1995) · Polymer · doi:10.1016/0032-3861(95)93115-3 · Cited by 639
New polylactide/layered silicate nanocomposites. 1. Preparation, characterization, and properties
Sinha Ray, S., Maiti, P., Okamoto, M., Yamada, K., & Ueda, K. (2002) · Macromolecules · doi:10.1021/ma011613e · Cited by 607
Biodegradable materials of poly(l-lactic acid): 1. Melt-spun and solution-spun fibres
Eling, B., Gogolewski, S., & Pennings, A. J. (1982) · Polymer · doi:10.1016/0032-3861(82)90176-8 · Cited by 607
Molecular conformation of poly(S‐lactic acid)
De Santis, P., & Kovacs, A. J. (1968) · Biopolymers · doi:10.1002/bip.1968.360060305 · Cited by 575
Sinha Ray, S., Yamada, K., Okamoto, M., & Ueda, K. (2003) · Polymer · doi:10.1016/s0032-3861(02)00818-2 · Cited by 566
Epitaxial crystallization and crystalline polymorphism of polylactides
Cartier, L., Okihara, T., Ikada, Y., Tsuji, H., Puiggali, J., & Lotz, B. (2000) · Polymer · doi:10.1016/s0032-3861(00)00234-2 · Cited by 559
Ordered Nanoporous Polymers from Polystyrene−Polylactide Block Copolymers
Zalusky, A. S., Olayo-Valles, R., Wolf, J. H., & Hillmyer, M. A. (2002) · Journal of the American Chemical Society · doi:10.1021/ja0278584 · Cited by 553
Mechanism of the Stereocomplex Formation between Enantiomeric Poly(lactide)s
Brizzolara, D., Cantow, H.-J., Diederichs, K., Keller, E., & Domb, A. J. (1996) · Macromolecules · doi:10.1021/ma951144e · Cited by 547
Tsuji, H., & Ikada, Y. (1999) · Polymer · doi:10.1016/s0032-3861(99)00004-x · Cited by 545
Crystallization and Melting Behavior of Polylactides
Sarasua, J.-R., Prud'homme, R. E., Wisniewski, M., Le Borgne, A., & Spassky, N. (1998) · Macromolecules · doi:10.1021/ma971545p · Cited by 525
Tsuji, H. (1995) · Polymer · doi:10.1016/0032-3861(95)93647-5 · Cited by 519
Reed, A. M., & Gilding, D. K. (1981) · Polymer · doi:10.1016/0032-3861(81)90168-3 · Cited by 502
Crystallization behaviour of poly(l-lactide)
Miyata, T., & Masuko, T. (1998) · Polymer · doi:10.1016/s0032-3861(97)10203-8 · Cited by 498
Nijenhuis, A. J., Colstee, E., Grijpma, D. W., & Pennings, A. J. (1996) · Polymer · doi:10.1016/s0032-3861(96)00455-7 · Cited by 479
Structure and thermal/mechanical properties of poly(l-lactide)-clay blend
Ogata, N., Jimenez, G., Kawai, H., & Ogihara, T. (1997) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/(sici)1099-0488(19970130)35:2<389::aid-polb14>3.0.co;2-e · Cited by 469
Ray, S. S., & Okamoto, M. (2003) · Macromolecular Rapid Communications · doi:10.1002/marc.200300008 · Cited by 454
New Polylactide/Layered Silicate Nanocomposites. 3. High-Performance Biodegradable Materials
Sinha Ray, S., Yamada, K., Okamoto, M., Ogami, A., & Ueda, K. (2003) · Chemistry of Materials · doi:10.1021/cm020953r · Cited by 453
The Case for Polylactic Acid as a Commodity Packaging Plastic
Sinclair, R. G. (1996) · Journal of Macromolecular Science, Part A · doi:10.1080/10601329608010880 · Cited by 453
Polylactide stereochemistry: effect on enzymic degradability
Reeve, M. S., McCarthy, S. P., Downey, M. J., & Gross, R. A. (1994) · Macromolecules · doi:10.1021/ma00081a030 · Cited by 433
General crystallization behaviour of poly(l-lactic acid)
Kalb, B., & Pennings, A. J. (1980) · Polymer · doi:10.1016/0032-3861(80)90315-8 · Cited by 421
Stereocomplex formation between enantiomeric poly(lactic acids). 9. Stereocomplexation from the melt
Tsuji, H., & Ikada, Y. (1993) · Macromolecules · doi:10.1021/ma00077a032 · Cited by 410
Hansen Solubility Parameters: A User's Handbook
Hansen, C. (1999) · CRC Press eBooks · doi:10.1201/9781420049312 · Cited by 408
Crystallization kinetics of poly(l-lactic acid)
Vasanthakumari, R., & Pennings, A. J. (1983) · Polymer · doi:10.1016/0032-3861(83)90129-5 · Cited by 406
Thermal stability of polyurethanes based on vegetable oils
Javni, I., Petrovìć, Z. S., Guo, A., & Fuller, R. (2000) · Journal of Applied Polymer Science · doi:10.1002/1097-4628(20000822)77:8<1742::aid-app11>3.0.co;2-t · Cited by 405
Crystal structure of stereocomplex of poly(L-lactide) and poly(D-lactide)
Okihara, T., Tsuji, M., Kawaguchi, A., Katayama, K.-I., Tsuji, H., Hyon, S.-H., & Ikada, Y. (1991) · Journal of Macromolecular Science, Part B · doi:10.1080/00222349108245788 · Cited by 382
Crystallization from the melt of poly(lactide)s with different optical purities and their blends
Tsuji, H., & Ikada, Y. (1996) · Macromolecular Chemistry and Physics · doi:10.1002/macp.1996.021971033 · Cited by 379
Thermal analysis of the double‐melting behavior of poly(L‐lactic acid)
Yasuniwa, M., Tsubakihara, S., Sugimoto, Y., & Nakafuku, C. (2004) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.10674 · Cited by 375
Crystallization kinetics of poly(L-lactide-co-meso-lactide)
Kolstad, J. J. (1996) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19961114)62:7<1079::aid-app14>3.0.co;2-1 · Cited by 365
Toughening of polylactide by melt blending with linear low‐density polyethylene
Anderson, K. S., Lim, S. H., & Hillmyer, M. A. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.12462 · Cited by 362
Mechanical, Physical, and Barrier Properties of Poly(Lactide) Films
Auras, R. A., Harte, B., Selke, S., & Hernandez, R. (2003) · Journal of Plastic Film & Sheeting · doi:10.1177/8756087903039702 · Cited by 346
Self-citationSafety assessment of polylactide (PLA) for use as a food-contact polymer
Conn, R. E., Kolstad, J. J., Borzelleca, J. F., Dixler, D. S., Filer, L. J., Ladu, B. N., & Pariza, M. W. (1995) · Food and Chemical Toxicology · doi:10.1016/0278-6915(94)00145-e · Cited by 344
New Polylactide/Layered Silicate Nanocomposites, 6
Sinha Ray, S., & Okamoto, M. (2003) · Macromolecular Materials and Engineering · doi:10.1002/mame.200300156 · Cited by 333
The frustrated structure of poly( l -lactide)
Puiggali, J., Ikada, Y., Tsuji, H., Cartier, L., Okihara, T., & Lotz, B. (2000) · Polymer · doi:10.1016/s0032-3861(00)00235-4 · Cited by 333
Biodegradable self-reinforced composite materials; Manufacturing structure and mechanical properties
Törmälä, P. (1992) · Clinical Materials · doi:10.1016/0267-6605(92)90081-4 · Cited by 332
Tsuji, H., & Ikada, Y. (2000) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(99)00111-1 · Cited by 329
Structural and optical properties of poly lactic acids
Kobayashi, J., Asahi, T., Ichiki, M., Oikawa, A., Suzuki, H., Watanabe, T., Fukada, E., & Shikinami, Y. (1995) · Journal of Applied Physics · doi:10.1063/1.358712 · Cited by 316
High Molecular Weight Polylactic Acid Polymers
Hartmann, M. H. (1998) · Biopolymers from Renewable Resources · doi:10.1007/978-3-662-03680-8_15 · Cited by 307
Miscibility and biodegradability of blends of poly(lactic acid) and poly(vinyl acetate)
Gajria, A. M., Davé, V., Gross, R. A., & P. McCarthy, S. (1996) · Polymer · doi:10.1016/0032-3861(96)82913-2 · Cited by 306
Tsuji, H., & Ikada, Y. (1998) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19980118)67:3<405::aid-app3>3.0.co;2-q · Cited by 305
Further investigations on the hydrolytic degradation of poly (DL-lactide)
Li, S., & McCarthy, S. (1999) · Biomaterials · doi:10.1016/s0142-9612(97)00226-3 · Cited by 301
Helix Distortion and Crystal Structure of the α-Form of Poly(l-lactide)
Sasaki, S., & Asakura, T. (2003) · Macromolecules · doi:10.1021/ma0348674 · Cited by 296
Morphology of poly(l-lactide) solution-grown crystals
Miyata, T., & Masuko, T. (1997) · Polymer · doi:10.1016/s0032-3861(96)00987-1 · Cited by 294
Synthesis of high‐molecular‐weight poly(L‐lactide) initiated with tin 2‐ethylhexanoate
Leenslag, J. W., & Pennings, A. J. (1987) · Die Makromolekulare Chemie · doi:10.1002/macp.1987.021880804 · Cited by 290
Miscibility, crystallization and melting of poly(3-hydroxybutyrate)/ poly(l-lactide) blends
Blümm, E., & Owen, A. J. (1995) · Polymer · doi:10.1016/0032-3861(95)90987-d · Cited by 289
Water vapor permeability of biodegradable polymers
Shogren, R. (1997) · Journal of environmental polymer degradation · doi:10.1007/bf02763592 · Cited by 287
Polylactide. II. Viscosity–molecular weight relationships and unperturbed chain dimensions
Schindler, A., & Harper, D. (1979) · Journal of Polymer Science: Polymer Chemistry Edition · doi:10.1002/pol.1979.170170831 · Cited by 278
Biodegradable fibres of poly(l-lactic acid) produced by melt spinning
Fambri, L., Pegoretti, A., Fenner, R., Incardona, S. D., & Migliaresi, C. (1997) · Polymer · doi:10.1016/s0032-3861(96)00486-7 · Cited by 274
Vink, E. T. H., Rábago, K. R., Glassner, D. A., Springs, B., O'Connor, R. P., Kolstad, J., & Gruber, P. R. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200400023 · Cited by 273
Melt rheology of poly(lactic acid): Entanglement and chain architecture effects
Dorgan, J. R., Williams, J. S., & Lewis, D. N. (1999) · Journal of Rheology · doi:10.1122/1.551041 · Cited by 272
Selective Enzymatic Degradations of Poly(l-lactide) and Poly(ε-caprolactone) Blend Films
Liu, L., Li, S., Garreau, H., & Vert, M. (2000) · Biomacromolecules · doi:10.1021/bm000046k · Cited by 272
Stereocomplexation and Morphology of Polylactides
Brochu, S., Prud'homme, R. E., Barakat, I., & Jerome, R. (1995) · Macromolecules · doi:10.1021/ma00119a010 · Cited by 269
MacDonald, R. T., McCarthy, S. P., & Gross, R. A. (1996) · Macromolecules · doi:10.1021/ma960513j · Cited by 260
Degradation of high molecular weight poly(l-lactide) in alkaline medium
Cam, D., Hyon, S.-H., & Ikada, Y. (1995) · Biomaterials · doi:10.1016/0142-9612(95)94144-a · Cited by 250
Modification of poly(L‐lactides) by blending: mechanical and hydrolytic behavior
Hiljanen‐Vainio, M., Varpomaa, P., Seppälä, J., & Törmälä, P. (1996) · Macromolecular Chemistry and Physics · doi:10.1002/macp.1996.021970427 · Cited by 249
Maleation of polylactide (PLA) by reactive extrusion
Carlson, D., Nie, L., Narayan, R., & Dubois, P. (1999) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19990425)72:4<477::aid-app3>3.0.co;2-q · Cited by 242
Isothermal crystallization and chain mobility of poly(L-lactide)
Iannace, S., & Nicolais, L. (1997) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19970502)64:5<911::aid-app11>3.0.co;2-w · Cited by 240
Synthesis of polylactides with different molecular weights
Hyon, S.-H., Jamshidi, K., & Ikada, Y. (1997) · Biomaterials · doi:10.1016/s0142-9612(97)00076-8 · Cited by 237
Shell crosslinked polymer assemblies: Nanoscale constructs inspired from biological systems
Wooley, K. L. (2000) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/(sici)1099-0518(20000501)38:9<1560::aid-pola20>3.0.co;2-f · Cited by 237
Moon, S. I., Lee, C. W., Miyamoto, M., & Kimura, Y. (2000) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/(sici)1099-0518(20000501)38:9<1673::aid-pola33>3.0.co;2-t · Cited by 237
Morphology and Enzymatic Degradation of Poly(l-lactic acid) Single Crystals
Iwata, T., & Doi, Y. (1998) · Macromolecules · doi:10.1021/ma980008h · Cited by 235
Biocomposites Made from Short Abaca Fiber and Biodegradable Polyesters
Shibata, M., Ozawa, K., Teramoto, N., Yosomiya, R., & Takeishi, H. (2003) · Macromolecular Materials and Engineering · doi:10.1002/mame.200290031 · Cited by 235
Miscibility, crystallization and morphology of poly(β-hydroxybutyrate)/poly(d,l-lactide) blends
Zhang, L., Xiong, C., & Deng, X. (1996) · Polymer · doi:10.1016/0032-3861(96)81093-7 · Cited by 234
Enzymatic degradation of microbial poly(3‐hydroxybutyrate) films
Kumagai, Y., Kanesawa, Y., & Doi, Y. (1992) · Die Makromolekulare Chemie · doi:10.1002/macp.1992.021930105 · Cited by 232
Polymer-hydroxyapatite composites for biodegradable bone fillers
Higashi, S., Yamamuro, T., Nakamura, T., Ikada, Y., Hyon, S.-H., & Jamshidi, K. (1986) · Biomaterials · doi:10.1016/0142-9612(86)90099-2 · Cited by 228
Properties and morphology of poly(L-lactide). II. hydrolysis in alkaline solution
Tsuji, H., & Ikada, Y. (1998) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/(sici)1099-0518(19980115)36:1<59::aid-pola9>3.0.co;2-x · Cited by 226
Park, T. G., Cohen, S., & Langer, R. (1992) · Macromolecules · doi:10.1021/ma00027a019 · Cited by 221
Enzymatic degradation of poly(ε-caprolactone)/poly(dl-lactide) blends in phosphate buffer solution
Gan, Z., Yu, D., Zhong, Z., Liang, Q., & Jing, X. (1999) · Polymer · doi:10.1016/s0032-3861(98)00549-7 · Cited by 217
Zell, M. T., Padden, B. E., Paterick, A. J., Thakur, K. A. M., Kean, R. T., Hillmyer, M. A., & Munson, E. J. (2002) · Macromolecules · doi:10.1021/ma0204148 · Cited by 215
de Jong, S. J., De Smedt, S. C., Wahls, M. W. C., Demeester, J., Kettenes-van den Bosch, J. J., & Hennink, W. E. (2000) · Macromolecules · doi:10.1021/ma992067g · Cited by 213
Phase separation in poly(ethylene glycol)/poly(lactic acid) blends
Younes, H., & Cohn, D. (1988) · European Polymer Journal · doi:10.1016/0014-3057(88)90013-4 · Cited by 212
Influence of Crystallinity and Stereochemistry on the Enzymatic Degradation of Poly(lactide)s
Li, S., & McCarthy, S. (1999) · Macromolecules · doi:10.1021/ma990117b · Cited by 211
Poly (l-lactide): a long-term degradation study in vivo
Pistner, H., Bendi, D. R., Mühling, J., & Reuther, J. F. (1993) · Biomaterials · doi:10.1016/0142-9612(93)90121-h · Cited by 205
Microstructure Analysis of Poly(lactic acid) Obtained by Lithium tert-Butoxide as Initiator
Kasperczyk, J. E. (1995) · Macromolecules · doi:10.1021/ma00115a028 · Cited by 205
Tsuji, H., & Miyauchi, S. (2001) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(00)00191-9 · Cited by 204
Tsuji, H. (2000) · Polymer · doi:10.1016/s0032-3861(99)00545-5 · Cited by 200
The biodegradability of polyester blends
Cha, Y., & Pitt, C. G. (1990) · Biomaterials · doi:10.1016/0142-9612(90)90124-9 · Cited by 196
Siparsky, G. L., Voorhees, K. J., Dorgan, J. R., & Schilling, K. (1997) · Journal of environmental polymer degradation · doi:10.1007/bf02763656 · Cited by 191
Gas permeation properties of poly(lactic acid)
Lehermeier, H. J., Dorgan, J. R., & Way, J. D. (2001) · Journal of Membrane Science · doi:10.1016/s0376-7388(01)00446-x · Cited by 191
Auras, R., Harte, B., & Selke, S. (2004) · Journal of Applied Polymer Science · doi:10.1002/app.20148 · Cited by 190
Self-citationThermal properties and physical ageing of poly (l-lactic acid)
Celli, A., & Scandola, M. (1992) · Polymer · doi:10.1016/0032-3861(92)90440-8 · Cited by 188
Crystallization and Microstructure of Poly(l-lactide-co-meso-lactide) Copolymers
Huang, J., Lisowski, M. S., Runt, J., Hall, E. S., Kean, R. T., Buehler, N., & Lin, J. S. (1998) · Macromolecules · doi:10.1021/ma9714629 · Cited by 187
Mechanism of adsorption of human albumin to titaniumin vitro
Klinger, A., Steinberg, D., Kohavi, D., & Sela, M. N. (1997) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(19970905)36:3<407::aid-jbm16>3.0.co;2-a · Cited by 186
Effect of strain on the properties of an ethylene-octene elastomer with conductive carbon fillers
Flandin, L., Chang, A., Nazarenko, S. I., Hiltner, A., & Baer, E. (2000) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(20000509)76:6<778::aid-app3>3.0.co;2-2 · Cited by 185
Rheological properties of amorphous and semicrystalline polylactic acid polymers
Fang, Q., & Hanna, M. A. (1999) · Industrial Crops and Products · doi:10.1016/s0926-6690(99)00009-6 · Cited by 184
Resorbable synthetic polymers s replacements for bone graft
Coombes, A. G. A., & Meikle, M. C. (1994) · Clinical Materials · doi:10.1016/0267-6605(94)90046-9 · Cited by 172
de Jong, S. J., van Dijk-Wolthuis, W. N. E., Kettenes-van den Bosch, J. J., Schuyl, P. J. W., & Hennink, W. E. (1998) · Macromolecules · doi:10.1021/ma980553i · Cited by 172
A New Strategy for Recycling and Preparation of Poly(l-lactic acid): Hydrolysis in the Melt
Tsuji, H., Daimon, H., & Fujie, K. (2003) · Biomacromolecules · doi:10.1021/bm034060j · Cited by 168
Tsuji, H., Ikada, Y., Hyon, S., Kimura, Y., & Kitao, T. (1994) · Journal of Applied Polymer Science · doi:10.1002/app.1994.070510216 · Cited by 166
Advances in Pharmaceutical Sciences
GANDERTON, D. (1992) · Cited by 165
Living polymers. Their discovery, characterization, and properties
Szwarc, M. (1998) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/(sici)1099-0518(19980115)36:1<ix::aid-pola2>3.0.co;2-9 · Cited by 163
Wisniewski, M., Borgne, A. L., & Spassky, N. (1997) · Macromolecular Chemistry and Physics · doi:10.1002/macp.1997.021980424 · Cited by 162
In vitro study of poly(lactic acid) pin degradation
Duek, E. A. R., Zavaglia, C. A. C., & Belangero, W. D. (1999) · Polymer · doi:10.1016/s0032-3861(98)00846-5 · Cited by 161
Cooper-White, J. J., & Mackay, M. E. (1999) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/(sici)1099-0488(19990801)37:15<1803::aid-polb5>3.0.co;2-m · Cited by 161
Polylactides ‐ synthesis, characterization and medical application
Kricheldorf, H. R., Kreiser‐Saunders, I., Jürgens, C., & Wolter, D. (1996) · Macromolecular Symposia · doi:10.1002/masy.19961030110 · Cited by 160
Spinu, M., Jackson, C., Keating, M. Y., & Gardner, K. H. (1996) · Journal of Macromolecular Science, Part A · doi:10.1080/10601329608014922 · Cited by 158
Migliaresi, C., Cohn, D., De Lollis, A., & Fambri, L. (1991) · Journal of Applied Polymer Science · doi:10.1002/app.1991.070430109 · Cited by 158
Mainil‐Varlet, P., Curtis, R., & Gogolewski, S. (1997) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(19970905)36:3<360::aid-jbm11>3.0.co;2-i · Cited by 154
Vibrational analysis of poly(L‐lactic acid)
Kister, G., Cassanas, G., Vert, M., Pauvert, B., & Terol, A. (1995) · Journal of Raman Spectroscopy · doi:10.1002/jrs.1250260409 · Cited by 152
Baratian, S., Hall, E. S., Lin, J. S., Xu, R., & Runt, J. (2001) · Macromolecules · doi:10.1021/ma001125r · Cited by 148
Rubber toughening of poly(lactide) by blending and block copolymerization
Grijpma, D. W., Hofslot, R. D. A. V., Super, H. T. J., Nijenhuis, A. J., & Pennings, A. J. (1994) · Polymer Engineering and Science · doi:10.1002/pen.760342205 · Cited by 148
Tsuji, H., & Ikada, Y. (1996) · Polymer · doi:10.1016/0032-3861(96)83146-6 · Cited by 145
Biodegradable polyester blends for biomedical application
Zhang, L., Xiong, C., & Deng, X. (1995) · Journal of Applied Polymer Science · doi:10.1002/app.1995.070560114 · Cited by 144
Bioprocessing – no longer a field of dreams
Sawyer, D. J. (2003) · Macromolecular Symposia · doi:10.1002/masy.200351130 · Cited by 143
Mechanical characterization of biodegradable implants
Claes, L. (1992) · Clinical Materials · doi:10.1016/0267-6605(92)90083-6 · Cited by 142
Enzymatic degradation of stereocopolymers derived from l -, dl - and meso-lactides
Li, S., Tenon, M., Garreau, H., Braud, C., & Vert, M. (2000) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(99)00091-9 · Cited by 141
Poly(lactic acids): a potential solution to plastic waste dilemma
Bogaert, J.-C., & Coszach, P. (2000) · Macromolecular Symposia · doi:10.1002/1521-3900(200003)153:1<287::aid-masy287>3.0.co;2-e · Cited by 141
Cicero, J. A., & Dorgan, J. R. (2001) · Journal of Polymers and the Environment · doi:10.1023/a:1016012818800 · Cited by 140
Aslan, S., Calandrelli, L., Laurienzo, P., Malinconico, M., & Migliaresi, C. (2000) · Journal of Materials Science · doi:10.1023/a:1004787326273 · Cited by 140
Poly(L‐lactide). IX. Hydrolysis in acid media
Tsuji, H., & Nakahara, K. (2002) · Journal of Applied Polymer Science · doi:10.1002/app.10813 · Cited by 140
Gupta, M. C., & Deshmukh, V. G. (1982) · Colloid & Polymer Science · doi:10.1007/bf01452999 · Cited by 139
Oxygen‐barrier properties of copolymers based on ethylene terephthalate
Polyakova, A., Liu, R. Y. F., Schiraldi, D. A., Hiltner, A., & Baer, E. (2001) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.1163 · Cited by 135
Degradation of polydispersed poly(l-lactic acid) to modulate lactic acid release
von Recum, H. A., Cleek, R. L., Eskin, S. G., & Mikos, A. G. (1995) · Biomaterials · doi:10.1016/0142-9612(95)98816-w · Cited by 133
Gahleitner, M., Wolfschwenger, J., Bachner, C., Bernreitner, K., & Neiβl, W. (1996) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19960725)61:4<685::aid-app12>3.0.co;2-x · Cited by 129
Improved cell adhesion by plasma-induced grafting of l-lactide onto polyurethane surface
Hsu, S., & Chen, W.-C. (2000) · Biomaterials · doi:10.1016/s0142-9612(99)00191-x · Cited by 128
Tsuji, H., Mizuno, A., & Ikada, Y. (1998) · Journal of Applied Polymer Science · Cited by 128
Tsuji, H., & Miyauchi, S. (2001) · Polymer · doi:10.1016/s0032-3861(00)00792-8 · Cited by 127
Poly(lactic acid) degradation in soil or under controlled conditions
Torres, A., Li, S., Roussos, S., & Vert, M. (1996) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19961226)62:13<2247::aid-app9>3.0.co;2-j · Cited by 123
Poly(lactic acid) degradation in soil or under controlled conditions
Torres, A., Li, S., Roussos, S., & Vert, M. (1996) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19961226)62:13<2295::aid-app14>3.0.co;2-2 · Cited by 123
Storey, R. F., & Hickey, T. P. (1994) · Polymer · doi:10.1016/0032-3861(94)90882-6 · Cited by 122
An Investigation of Poly(lactic acid) Degradation
Zhang, X., WYSS, U. P., Pichora, D. R., & Goosen, M. F. A. (1994) · Journal of Bioactive and Compatible Polymers · doi:10.1177/088391159400900105 · Cited by 122
LCST phase separation in biodegradable polymer blends: poly(D,L-lactide) and poly(-caprolactone)
Meredith, J. C., & Amis, E. J. (2000) · Macromolecular Chemistry and Physics · doi:10.1002/(sici)1521-3935(20000301)201:6<733::aid-macp733>3.0.co;2-5 · Cited by 122
The ring‐opening polymerization of D , L ‐lactide in the melt initiated with tetraphenyltin
Kohn, F. E., van den Berg, J. W. A., van de ridder, G., & Feijén, J. (1984) · Journal of Applied Polymer Science · doi:10.1002/app.1984.070291255 · Cited by 121
Structure and crystallization kinetics of poly( L ‐lactic acid)
Marega, C., Marigo, A., Noto, V. D., Zannetti, R., Martorana, A., & Paganetto, G. (1992) · Die Makromolekulare Chemie · doi:10.1002/macp.1992.021930704 · Cited by 118
Temperature-responsive permeability of porous PNIPAAm-g-PE membranes
Peng, T., & Cheng, Y. (1998) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19981212)70:11<2081::aid-app2>3.0.co;2-4 · Cited by 118
Breitenbach, A., & Kissel, T. (1998) · Polymer · doi:10.1016/s0032-3861(97)10077-5 · Cited by 117
Iannace, S., Ambrosio, L., Huang, S. J., & Nicolais, L. (1994) · Journal of Applied Polymer Science · doi:10.1002/app.1994.070541017 · Cited by 117
Solid State 13C CP-MAS NMR Studies of the Crystallinity and Morphology of Poly( l -lactide)
Thakur, K. A. M., Kean, R. T., Zupfer, J. M., Buehler, N., Doscotch, M. A., & Munson, E. J. (1996) · Macromolecules · doi:10.1021/ma960828z · Cited by 116
New developments on the ring opening polymerisation of polylactide
Jacobsen, S., Fritz, H. ‐., Degée, P., Dúbois, P., & Jérôme, R. (2000) · Industrial Crops and Products · doi:10.1016/s0926-6690(99)00053-9 · Cited by 112
Bechtold, K., Hillmyer, M. A., & Tolman, W. B. (2001) · Macromolecules · doi:10.1021/ma0114887 · Cited by 110
Tsuji, H., Nakahara, K., & Ikarashi, K. (2001) · Macromolecular Materials and Engineering · doi:10.1002/1439-2054(20010701)286:7<398::aid-mame398>3.0.co;2-g · Cited by 110
Structural changes of polylactic-acid (PLA) microspheres under hydrolytic degradation
González, M. F., Ruseckaite, R. A., & Cuadrado, T. R. (1999) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19990222)71:8<1223::aid-app2>3.0.co;2-i · Cited by 109
Polylactones, 11. Cationic copolymerization of glycolide with L , L ‐dilactide
Kricheldorf, H. R., & Kreiser‐Saunders, I. (1987) · Die Makromolekulare Chemie · doi:10.1002/macp.1987.021880810 · Cited by 108
Migliaresi, C., Lollis, A. D., Fambri, L., & Cohn, D. (1991) · Clinical Materials · doi:10.1016/0267-6605(91)90018-b · Cited by 108
Starch, Poly(lactic acid), and Poly(vinyl alcohol) Blends
Ke, T., & Sun, X. S. (2003) · Journal of Polymers and the Environment · doi:10.1023/a:1023875227450 · Cited by 107
Crosslinked poly(l-lactide) and poly(ε-caprolactone)
Nijenhuis, A. J., Grijpma, D. W., & Pennings, A. J. (1996) · Polymer · doi:10.1016/0032-3861(96)87642-7 · Cited by 106
Characterization of poly( D , L ‐lactic acid) by gel permeation chromatography
Dijk, J., Smit, J. A. M., Kohn, F. E., & Feijén, J. (1983) · Journal of Polymer Science Polymer Chemistry Edition · doi:10.1002/pol.1983.170210121 · Cited by 106
Review : Polymers for Absorbable Surgical Sutures—Part II
Benicewicz, B. C., & Hopper, P. K. (1991) · Journal of Bioactive and Compatible Polymers · doi:10.1177/088391159100600106 · Cited by 103
Tsuji, H., Yamada, T., Suzuki, M., & Itsuno, S. (2003) · Polymer International · doi:10.1002/pi.1093 · Cited by 101
Design of lactide copolymers as biomaterials
Ouchi, T., & Ohya, Y. (2003) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.10848 · Cited by 100
A study on cytocompatible poly(chitosan-g-l-lactic acid)
Yao, F., Chen, W., Wang, H., Liu, H., Yao, K., Sun, P., & Lin, H. (2003) · Polymer · doi:10.1016/s0032-3861(03)00676-1 · Cited by 100
Davies, M. C., Shakesheff, K. M., Shard, A. G., Domb, A. J., Roberts, C. J., Tendler, S. J. B., & Williams, P. M. (1996) · Macromolecules · doi:10.1021/ma950889h · Cited by 99
Diffusion coefficient and equilibrium solubility of water molecules in biodegradable polymers
Yoon, J., Jung, H.-W., Kim, M.-N., & Park, E.-S. (2000) · Journal of Applied Polymer Science · doi:10.1002/1097-4628(20000822)77:8<1716::aid-app8>3.0.co;2-f · Cited by 99
Poly(l-lactide): a long-term degradation study in vivo
Pistner, H., Stallforth, H., Gutwald, R., Mühling, J., Reuther, J. F., & Michel, C. (1994) · Biomaterials · doi:10.1016/0142-9612(94)90223-2 · Cited by 97
Microstructural analysis of poly[(l,l-lactide)-co-(glycolide)] by 1H and 13C n.m.r. spectroscopy
Kasperczyk, J. (1996) · Polymer · doi:10.1016/0032-3861(96)81088-3 · Cited by 97
Kimura, Y., MATSUZAKI, Y., Yamane, H., & Kitao, T. (1989) · Polymer · doi:10.1016/0032-3861(89)90058-x · Cited by 96
Ohya, Y., Maruhashi, S., & Ouchi, T. (1998) · Macromolecules · doi:10.1021/ma980377d · Cited by 92
Stepwise Assembly of Enantiomeric Poly(lactide)s on Surfaces
Serizawa, T., Yamashita, H., Fujiwara, T., Kimura, Y., & Akashi, M. (2001) · Macromolecules · doi:10.1021/ma001705o · Cited by 89
Tsuji, H., Smith, R. K., Bonfield, W., & Ikada, Y. (2000) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(20000131)75:5<629::aid-app5>3.0.co;2-a · Cited by 89
Synthesis of ABA triblock copolymers of iε-caprolactone and DL-lactide
Song, C. X., & Feng, X. D. (1984) · Macromolecules · doi:10.1021/ma00142a057 · Cited by 88
Novel polyphosphazene/poly(lactide-co-glycolide) blends: miscibility and degradation studies
Ibim, S. E. M., Ambrosio, A. M. A., Kwon, M. S., El‐Amin, S. F., Allcock, H. R., & Laurencin, C. T. (1997) · Biomaterials · doi:10.1016/s0142-9612(97)80009-9 · Cited by 88
Li, Y., Nothnagel, J., & Kissel, T. (1997) · Polymer · doi:10.1016/s0032-3861(97)00178-x · Cited by 87
Functional Properties of Polylactic Acid Starch‐Based Loose‐Fill Packaging Foams
Fang, Q., & Hanna, M. A. (2000) · Cereal Chemistry · doi:10.1094/cchem.2000.77.6.779 · Cited by 82
Effect of P(lLA-co-?CL) on the compatibility and crystallization behavior of PCL/PLLA blends
Kim, C.-H., Cho, K. Y., Choi, E., & Park, J.-K. (2000) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(20000705)77:1<226::aid-app29>3.0.co;2-8 · Cited by 79
Novel Porous Ceramic Material via Burning of Polylactide/Layered Silicate Nanocomposite
Ray, S. S., Okamoto, K., Yamada, K., & Okamoto, M. (2002) · Nano Letters · doi:10.1021/nl020284g · Cited by 79
Zhao, Y., Wang, Z., Wang, J., Mai, H., Yan, B., & Yang, F. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.13354 · Cited by 78
Wang, H., Sun, X. S., & Seib, P. A. (2002) · Journal of Polymers and the Environment · doi:10.1023/a:1021139903549 · Cited by 77
Stevels, W. M., Ankoné, M. J. K., Dijkstra, P. J., & Feijén, J. (1995) · Macromolecular Chemistry and Physics · doi:10.1002/macp.1995.021961121 · Cited by 76
Polylactide Fibres: Fabrication, Properties, Use, Prospects. A Review
Perepelkin, K. E. (2002) · Fibre Chemistry · doi:10.1023/a:1016359925976 · Cited by 76
Gel casting of resorbable polymers
Coombes, A. G. A., & Heckman, J. D. (1992) · Biomaterials · doi:10.1016/0142-9612(92)90053-q · Cited by 75
Tsuji, H., & Sumida, K. (2000) · Journal of Applied Polymer Science · doi:10.1002/1097-4628(20010228)79:9<1582::aid-app60>3.0.co;2-7 · Cited by 74
Synthesis and degradability of a novel aliphatic polyester based on l-lactide and sorbitol: 3
Arvanitoyannis, I., Nakayama, A., Psomiadou, E., Kawasaki, N., & Yamamoto, N. (1996) · Polymer · doi:10.1016/0032-3861(96)83152-1 · Cited by 73
Enhanced crystallization of poly(L-lactide-co-ɛ-caprolactone) during storage at room temperature
Tsuji, H., Mizuno, A., & Ikada, Y. (2000) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(20000509)76:6<947::aid-app22>3.0.co;2-5 · Cited by 72
Tsuji, H., & Muramatsu, H. (2001) · Journal of Applied Polymer Science · doi:10.1002/app.1651 · Cited by 71
Koyama, N., & Doi, Y. (1996) · Macromolecules · doi:10.1021/ma960119l · Cited by 70
Review : Polymers for Absorbable Surgical Sutures—Part I
Benicewicz, B. C., & Hopper, P. K. (1990) · Journal of Bioactive and Compatible Polymers · doi:10.1177/088391159000500407 · Cited by 70
Tsuji, H., & Ishida, T. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.11605 · Cited by 68
Genetically Modified Corn— Environmental Benefits and Risks
Gewin, V. L. (2003) · PLoS Biology · doi:10.1371/journal.pbio.0000008 · Cited by 67
Effect of Light on Alteration of Nutritional Value and Flavor of Milk: A Review
Bradley, R. L. (1980) · Journal of Food Protection · doi:10.4315/0362-028x-43.4.314 · Cited by 66
Zoppi, R. A., Contant, S., Duek, E. A. D. R., Marques, F. R., Wada, M. L. F., & Nunes, S. P. (1999) · Polymer · doi:10.1016/s0032-3861(98)00562-x · Cited by 65
Ohya, Y., Maruhashi, S., & Ouchi, T. (1998) · Macromolecular Chemistry and Physics · doi:10.1002/(sici)1521-3935(19980901)199:9<2017::aid-macp2017>3.0.co;2-9 · Cited by 63
Bleach, N. C., Tanner, K. E., Kellomäki, M., & Törmälä, P. (2001) · Journal of Materials Science: Materials in Medicine · doi:10.1023/a:1012884310027 · Cited by 62
Hori, Y., Takahashi, Y., Yamaguchi, A., & Nishishita, T. (1993) · Macromolecules · doi:10.1021/ma00068a053 · Cited by 62
Moehrle, M., Soballa, M., & Korn, M. (2003) · Photodermatology Photoimmunology & Photomedicine · doi:10.1034/j.1600-0781.2003.00031.x · Cited by 62
Wang, Z., Hsiao, B. S., Zong, X., Yeh, F., Zhou, J. J., Dormier, E., & Jamiolkowski, D. D. (2000) · Polymer · doi:10.1016/s0032-3861(99)00200-1 · Cited by 61
Tsuji, H., & Ikada, Y. (1994) · Journal of Applied Polymer Science · doi:10.1002/app.1994.070530808 · Cited by 61
Water sorption in amorphous poly(ethylene terephthalate)
Launay, A., Thominette, F., & Verdu, J. (1999) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19990815)73:7<1131::aid-app4>3.0.co;2-u · Cited by 61
Eguiburu, J. L., Fernandez-Berridi, M. J., & Román, J. S. (1996) · Polymer · doi:10.1016/0032-3861(96)00184-x · Cited by 60
Morphological behavior of model poly(ethylene‐alt‐propylene)‐b‐polylactide diblock copolymers
Schmidt, S. C., & Hillmyer, M. A. (2002) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.10291 · Cited by 58
Ohya, Y., Maruhashi, S., & Ouchi, T. (1998) · Macromolecular Chemistry and Physics · doi:10.1002/(sici)1521-3935(19980901)199:9<1785::aid-macp1785>3.0.co;2-4 · Cited by 58
Kamei, S., Inoue, Y., Okada, H., Yamada, M., Ogawa, Y., & Toguchi, H. (1992) · Biomaterials · doi:10.1016/0142-9612(92)90120-d · Cited by 56
Li, Y., Volland, C., & Kissel, T. (1998) · Polymer · doi:10.1016/s0032-3861(97)10048-9 · Cited by 55
In vitro degradation and biocompatibility of poly( DL ‐lactide‐ϵ‐caprolactone) nerve guides
Meek, M. F., Jansen, K., Steendam, R., van Oeveren, W., van Wachem, P. B., & van Luyn, M. J. A. (2003) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.10157 · Cited by 55
General crystallization behaviour of poly(l-lactic acid) PLLA: 2. Eutectic crystallization of PLLA
Zwiers, R. J. M., Gogolewski, S., & Pennings, A. J. (1983) · Polymer · doi:10.1016/0032-3861(83)90128-3 · Cited by 55
Polyakova, A. S., Connor, D. M., Collard, D. M., Schiraldi, D. A., Hiltner, A., & Baer, E. (2001) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.1164 · Cited by 54
Research works printed but not linked: 66
- Aluminum Association, 1999, Tokyo Steps up to Recycling Efforts
- Mochizuki M., 2002, Biopolymers. Polyesters III. Applications and Commercial Products, 1
- Tsuji H., 2002, Biopolymers. Polyesters III. Applications and Commercial Products, 129
- Gruber P. R., 2002, Biopolymers. Polyesters III. Applications and Commercial Products, 235
- Kawahima N., 2002, Biopolymers. Polyesters III. Applications and Commercial Products, 251
- 10.1111/j.1574-6976.1995.tb00168.x · doi:10.1111/j.1574-6976.1995.tb00168.x · Paper page
- N.Whiteman “2000 Polymers Laminations and Coatings Conference” Chicago IL2000 p.631–635.
- J. B.Snook M.Sc. Thesis Michigan State University East Lansing1994 p.130.
- Perego G., 1996, Polymer, 59, 37
- M. H.Hartmann N.Whiteman “TAPPI Polymers Laminations & Coatings Conference” Chicago IL United States2000 p.467–474.
- Leaversuch R. D., 2003, Plastics Technology
- Baillie J., 1997, Packag. Week, 13
- O'Brien M., 2003, Ilip Launches New Fresh Food Packaging Solution
- 2003, NatureWorks™ PLA Makes North American Commercial Debut in Grocery Stores Taking a Fresh Approach to Deli Packaging
- Kharas G. B., 1994, Plastics from Microbes, 93
- D. R.Witzke Ph.D. Thesis Michigan State University East Lansing MI1997 p.389.
- 10.1016/0032-3861(81)90256-1 · DOI
- 10.1016/0032-3861(95)93647-5 · DOI · Paper page
- Huang J., 1996, Polym. Prepr. (Am. Chem. Soc., Div. Polym. Chem.), 37, 370
- Rappard P., 1997, Packag. Rev. S. Afr., 23, 19
- Farrer K. T. H., 1983, Packag. News
- Dunkley W. L., 1963, Milk Dealer, 52, 52
- R.Auras Ph.D. Thesis Michigan State University East Lansing2004 p.268.
- VanKrevelen D. W., 1997, Properties of Polymers
- Ou X., 2003, ANTEC 2003, 1701
- Doi Y., 1994, Biodegradable Plastics and Polymers: Proceedings of the Third International Scientific Workshop on Biodegradable Plastics and Polymers, Osaka, Japan (Studies in Polymer Science, 12), 464
- J. R.Dorgan J.Randal J.Janzen D.Knauss B.Braun P.Gruber “Global Plastics Environmental Conference 2004” Detroit MI February 18–192004.
- Cargill‐Dow‐LLC, PLA Polymer 4042D – A NatureWorks Product. Biaxially Oriented Films – General Purpose
- D. M.Bigg “Annual Technical Conference – Society of Plastics Engineers” 1996 p.2028–2039.
- Barton A. F. M., 1999, Handbook of Solubility Parameters and Other Cohesion Parameters
- Hansen C. M., 1967, J. Paint Technol., 39, 511
- Rocha G., 1992, Polym. Prepr. (Am. Chem. Soc., Div. Polym. Chem.), 33, 454
- Pauly S., 1999, Polymer Handbook, 547
- Siparsky G. L., 1997, J. Environ. Polym. Degrad., 5, 125, 10.1007/bf02763656 · DOI · Paper page
- N.Whiteman P.DeLassus J.Gunderson “Polymers Laminations & Coatings Conference Proceeding Polyolefins 2002 International Conference on Polyolefins” Houston Texas USA February 24–27 2002.
- 10.1023/a:1021869530253 · doi:10.1023/a:1021869530253
- 10.1023/a:1021860301487 · doi:10.1023/a:1021860301487
- 10.1023/a:1022874530586 · doi:10.1023/a:1022874530586
- 10.1023/a:1022849813748 · doi:10.1023/a:1022849813748
- 10.1023/a:1021808317416 · DOI
- 10.1002/1097-4628(20000815)77:7<1452::aid-app7>3.0.co;2-s · doi:10.1002/1097-4628(20000815)77:7<1452::aid-app7>3.0.co;2-s
- 10.1016/0142-9612(90)90124-9 · DOI · Paper page
- 10.1023/a:1021812418325 · doi:10.1023/a:1021812418325
- 10.1002/app.11605 · DOI · Paper page
- 10.1023/a:1016036302871 · DOI
- R. G.Sinclair “The First Corn Utilization Conference” St. Louis Missouri June 11–12 1987 p.1–16.
- 10.1016/0032-3861(79)90009-0 · DOI · Paper page
- 10.1002/(sici)1097-4628(19981212)70:11<2259::aid-app20>3.0.co;2-j · doi:10.1002/(sici)1097-4628(19981212)70:11<2259::aid-app20>3.0.co;2-j
- Park J. W., 1999, Korea Polym. J., 7, 93
- Kim H. S., 1998, Korea Polym. J., 6, 422
- 10.1016/0032-3861(96)83146-6 · DOI
- Farmaceutico S., 2003, Lactide/Glycolide Copolymers: Review on Toxicity, Biocompatibility, and Clinical Application (data up to 1999)
- Hartmann M. H., 1999, Polym. Prepr. (Am. Chem. Soc., Div. Polym. Chem.), 40, 570
- O'Brien M., 2003, Cargill Dow's World‐scale Manufacturing Facility Comes On Line
- O'Brien M., 2003, Biopolymer Industry Moves from Field of Dreams to Reality: Consumer Products Hitting Retail Shelves Across the Globe
- O'Brien M., 2003, First North American Converter Takes Aim at Grocery Industry with NatureWorks™ PLA
- O'Brien M., 2001, Unifi and Cargill Dow Provide Update on NatureWorks™ PLA Development, 2
- 2003, Faerch Plast to Market Food Packaging from Nature
- 2003, NatureWorks™ PLA Makes North American Commercial Debut in Grocery Stores Taking a Fresh Approach to Deli Packaging
- NatureWorks™ PLA, 2003, Top It Off With NatureWorks™ PLA. Dairy and Delicatessen Container Lidding Solutions
- 2003, Kanebo Corn Fiber
- Lunt J., 2003, Polylactic Acid Polymers from Corn: Potential Applications in the Textiles Industry
- Arai K., 2001, Biodegradable Lactide and Polyester Copolymers for use in Packaging and Their Film Properties
- Mohan A. M., 2002, Packag. Digest, 30, 34
- Nageroni J., 2001, Flexible Packag., 25
- Michael O. B., 2003, Ilip Launches New Fresh Food Packaging Solution
Cited by
The Path Forward for Biofuels and Biomaterials
Ragauskas, A. J., Williams, C. K., Davison, B. H., Britovsek, G., Cairney, J., Eckert, C. A., Frederick, W. J., Hallett, J. P., Leak, D. J., Liotta, C. L., et al. (2006) · Science · doi:10.1126/science.1114736 · Cited by 5,741
Farah, S., Anderson, D. G., & Langer, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.012 · Cited by 3,443
TEMPO-oxidized cellulose nanofibers
Isogai, A., Saito, T., & Fukuzumi, H. (2011) · Nanoscale · doi:10.1039/c0nr00583e · Cited by 3,179
Processing technologies for poly(lactic acid)
Lim, L.-T., Auras, R., & Rubino, M. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.05.004 · Cited by 2,766
Self-citationSustainable polymers from renewable resources
Zhu, Y., Romain, C., & Williams, C. K. (2016) · Nature · doi:10.1038/nature21001 · Cited by 2,762
Metadata
- Authors
- Auras, R., Harte, B., & Selke, S.
- Affiliations
- Michigan State University (US)
- Corresponding author
- Auras, Rafael
- Venue
- Macromolecular Bioscience
- Publisher
- Wiley
- Published
- 2004-08-24
- Volume
- 4
- Issue
- 9
- Pages
- 835-864
- ISSN
- 1616-5187 (ISSN-L)
- 1616-5195
- OpenAlex
- W2054432898
- Cited by
- 3,454
- References
- 240
- Citations by year
- 2026: 160 · 2025: 172 · 2024: 191 · 2023: 196 · 2022: 237 · 2021: 258 · 2020: 202 · 2019: 204 · 2018: 191 · 2017: 227 · 2016: 198 · 2015: 212 · 2014: 183 · 2013: 185 · 2012: 149
- FWCI
- 2.75
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Macromolecular Bioscience (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Biomaterials › Nanocomposite Films for Food Packaging
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Keywords
- polylactic acid, biodegradable packaging, PLA films, mechanical properties, glass transition temperature, water sorption, solubility parameter, gas permeability, barrier properties, food contact safety, bio-based polymers
- MeSH terms
- Biocompatible Materials, Biotechnology, Diffusion, Glass, Hot Temperature, Models, Chemical, Polyesters, Polymers, Solubility, Spectrophotometry, Temperature, Thermodynamics, Time Factors, Lactic Acid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.