Biocomposites of Plasticized Starch Reinforced with Cellulose Crystallites from Cottonseed Linter
The DOI matches its Crossref record; 35 of the 36 references it cites were found in a registry or an index.
Abstract
Environmentally friendly starch biocomposites were successfully developed using a colloidal suspension of cottonseed linter cellulose crystallite as a filler to reinforce glycerol plasticized starch (PS). The cellulose crystallites, having lengths of 350 +/- 70 nm and diameters of 40 +/- 8 nm on average, were prepared from cottonseed linters by acid hydrolysis. The dependence of morphology and properties of the PS-based biocomposites on cellulose crystallites content in the range from 0 to 30 wt.-% was investigated by scanning electron microscopy, differential scanning thermal analysis, dynamic mechanical thermal analysis, and measurements of mechanical properties and water absorption. The results indicate that the strong interactions between fillers and between the filler and PS matrix play a key role in reinforcing the resulting composites. The PS/cellulose crystallite composites, conditioned at 50% relative humidity, undergo an increase in both tensile strength and Young's modulus from 2.5 MPa for PS film to 7.8 MPa and from 36 MPa for PS film to 301 MPa. Further, incorporating cottonseed linter cellulose crystallites into PS matrix leads to an improvement in water resistance for the resulting biocomposites. The mechanical behaviors of the starch-based biocomposites as a function of cellulose crystallites content.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“For glycerol plasticized starch nanocomposite reinforced with cellulose crystallites prepared from cottonseed linter [141], an increase of Tg with filler content was reported and attributed to cellulose/starch interactions.”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [141]
Citations
Cites
Composites reinforced with cellulose based fibres
Bledzki, A. (1999) · Progress in Polymer Science · doi:10.1016/s0079-6700(98)00018-5 · Cited by 4,696
Mohanty, A. K., Misra, M., & Drzal, L. T. (2002) · Journal of Polymers and the Environment · doi:10.1023/a:1021013921916 · Cited by 2,151
Polymer nanocomposites reinforced by cellulose whiskers
Favier, V., Chanzy, H., & Cavaille, J. Y. (1995) · Macromolecules · doi:10.1021/ma00122a053 · Cited by 1,149
Review: Current international research into cellulosic fibres and composites
Eichhorn, S. J., Baillie, C. A., Zafeiropoulos, N., Mwaikambo, L. Y., Ansell, M. P., Dufresne, A., Entwistle, K. M., Herrera-Franco, P. J., Escamilla, G. C., Groom, L., et al. (2001) · Journal of Materials Science · doi:10.1023/a:1017512029696 · Cited by 943
Dong, X. M., Kimura, T., Revol, J.-F., & Gray, D. G. (1996) · Langmuir · doi:10.1021/la950133b · Cited by 766
Plasticized starch/tunicin whiskers nanocomposites. 1. Structural analysis
Anglès, M. N., & Dufresne, A. (2000) · Macromolecules · doi:10.1021/ma0008701 · Cited by 667
Biocomposites based on plasticized starch: thermal and mechanical behaviours
Averous, L., & Boquillon, N. (2004) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2003.11.015 · Cited by 629
Dufresne, A., Dupeyre, D., & Vignon, M. R. (2000) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(20000628)76:14<2080::aid-app12>3.0.co;2-u · Cited by 523
Thermoplastic starch–cellulosic fibers composites: preliminary results
Curvelo, A. (2001) · Carbohydrate Polymers · doi:10.1016/s0144-8617(00)00314-3 · Cited by 470
Plasticized Starch/Tunicin Whiskers Nanocomposite Materials. 2. Mechanical Behavior
Anglès, M. N., & Dufresne, A. (2001) · Macromolecules · doi:10.1021/ma001555h · Cited by 431
Research works printed but not linked: 5
- Lu Y. S., 2005, Carbohydr. Polym.
- Battista O. A., 1975, Microcrystal Polymer Science
- 10.1021/la990046 · doi:10.1021/la990046
- Ljungberg N., 2005, Biomacromolecules
- Vergnaud J. M., 1991, Liquid Transport Process in Polymeric Materials: Modeling and Industrial Applications
Cited by
Items 101–200 of 200
Ramezani, H., Behzad, T., & Bagheri, R. (2019) · Polymers for Advanced Technologies · doi:10.1002/pat.4796 · Cited by 32
Li, Y., Han, C., Yu, Y., & Xiao, L. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.01.054 · Cited by 33
Holilah, H., Suryanegara, L., Bahruji, H., Masruchin, N., Suprapto, S., Ediati, R., Asranudin, A., Jalil, A. A., Ramadhani, D. V., Hamid, Z. A. A., et al. (2023) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2023.11.084 · Cited by 33
The properties of potato and cassava starch films combined with cellulose fibers and/or nanoclay
Halal, S. L. M. E., Bruni, G. P., do Evangelho, J. A., Biduski, B., Silva, F. T., Dias, Á. R. G., Zavareze, E. D. R., & Luvielmo, M. D. M. (2017) · Starch - Stärke · doi:10.1002/star.201700115 · Cited by 32
Shape tunability of carbonized cellulose nanocrystals
Bartoli, M., Giorcelli, M., Jagdale, P., Rovere, M., Tagliaferro, A., Chae, M. S., & Bressler, D. C. (2019) · SN Applied Sciences · doi:10.1007/s42452-019-1727-2 · Cited by 32
Spiridon, I., Teacă, C., Bodîrlău, R., & Bercea, M. (2012) · Journal of Polymers and the Environment · doi:10.1007/s10924-012-0498-2 · Cited by 30
Cassava starch‐based foams reinforced with bacterial cellulose
da Silva, A., Nievola, L. M., Tischer, C. A., Mali, S., & Faria-Tischer, P. C. S. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.39526 · Cited by 34
Cellulosic fibre-reinforced green composites
John, M. J., Anandjiwala, R. D., Pothan, L. A., & Thomas, S. (2007) · Composite Interfaces · doi:10.1163/156855407782106546 · Cited by 33
“In an innovative study [32], environmentally friendly starch biocomposites were successfully developed using a colloidal suspension of cottonseed linter cellulose crystallite as a filler to reinforce glycerol plasticized starch (PS).”
MethodMedeiros, E. S. D., Dufresne, A., & Orts, W. J. (2009) · CRC Press eBooks · doi:10.1201/9781420080247-c9 · Cited by 29
Popescu, M., Dogaru, B.-I., & Popescu, C. (2020) · Materials · doi:10.3390/ma13132900 · Cited by 28
“when they added CNC into plasticized starch [32].”
BackgroundMatrices for natural-fibre reinforced composites
Sreekumar, P. A., & Thomas, S. (2008) · Elsevier eBooks · doi:10.1533/9781845694593.1.67 · Cited by 34
ADVANCED FUNCTIONAL MATERIALS BASED ON CELLULOSE
Zhang, J., & Zhang, J. P. (2010) · Acta Polymerica Sinica · doi:10.3724/sp.j.1105.2010.10238 · Cited by 26
Rodríguez-Castellanos, W., Flores‐Ruiz, F. J., Martínez‐Bustos, F., Chiñas‐Castillo, F., & Espinoza‐Beltrán, F. J. (2014) · Journal of Applied Polymer Science · doi:10.1002/app.41787 · Cited by 25
Bio-nanocomposites for Modern Agricultural Applications
Menossi, M., Casalongué, C. A., & Álvarez, V. A. (2022) · Springer eBooks · doi:10.1007/978-981-16-8698-6_68 · Cited by 25
Cellulose Nanocomposites for High-Performance Applications
Cherian, B. M., Leão, A. L., de Souza, S. F., Thomas, S., Pothan, L. A., & Kottaisamy, M. (2011) · Springer eBooks · doi:10.1007/978-3-642-17370-7_21 · Cited by 25
Farahbakhsh, N., Roodposhti, P. S., Sadeghifar, H., Venditti, R. A., & Jur, J. S. (2017) · Journal of Materials Science · doi:10.1007/s10853-016-0738-2 · Cited by 23
Yu, H., & Yan, C. (2017) · Wiley eBooks · doi:10.1002/9783527689972.ch12 · Cited by 32
Nagarajan, K. J., Balaji, A. N., Rajan, S. T. K., & Sathickbasha, K. (2019) · Materials Research Express · doi:10.1088/2053-1591/ab5a9d · Cited by 22
Karimi, S., Abdulkhani, A., Tahir, P. M., & Dufresne, A. (2016) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2016.06.061 · Cited by 21
Starch Based Blends, Composites and Nanocomposites
Yu, L. F., Liu, X., Petinakis, E., Dean, K., & Bateman, S. A. (2012) · Advanced structured materials · doi:10.1007/978-3-642-20940-6_4 · Cited by 22
Hadi, A., Nawab, A., Alam, F., & Zehra, K. (2022) · Polymer Composites · doi:10.1002/pc.26629 · Cited by 20
Khattab, M. M., Hady, N. A. A., & Dahman, Y. (2017) · Elsevier eBooks · doi:10.1016/b978-0-08-100957-4.00021-8 · Cited by 24
Bruna, A. S. M., João, H. D. O. R., Cruz, L. S., Leal, I. L., Viana, J. D., Joyce, B. A., & Druzian, J. I. (2017) · AFRICAN JOURNAL OF BIOTECHNOLOGY · doi:10.5897/ajb2017.15943 · Cited by 20
“Similar results to this study were found by Lu et al. (2005), Wang et al. (2006) and Cao et al. (2008) for nano-biocomposites with starch, protein and starch matrixes, respectively, containing nanocellulose from cotton linter (Lu et al., 2006) and from hemp (Cao et al., 2008).”
ResultWu, M., Gao, F., Yin, D.-M., Luo, Q., Fu, Z., & Zhou, Y. (2018) · Polymers · doi:10.3390/polym10080855 · Cited by 20
“The results demonstrate that adding the CS to the ball mill process could significantly improve the mechanical properties of the film material, which is due to the hydrogen bond between the CS and starch [41].”
BackgroundAn Overview of Higher Barrier Packaging Using Nanoadditives
George, J., Aaliya, B., Sunooj, K. V., & Kumar, R. (2021) · Wiley eBooks · doi:10.1002/9783527827718.ch10 · Cited by 21
From agricultural cellulosic waste to food delivery packaging: A mini-review
Ma, J., He, J., Kong, X., Zheng, J., Han, L., Liu, Y., Zhu, Z., & Zhang, Z. (2022) · Chinese Chemical Letters · doi:10.1016/j.cclet.2022.04.005 · Cited by 19
A Study of Physicomechanical and Morphological Properties of Starch/Poly(vinylalcohol) Based Films
Ray, D., Roy, P., Sengupta, S., Sengupta, S. P., Mohanty, A. K., & Misra, M. (2009) · Journal of Polymers and the Environment · doi:10.1007/s10924-009-0117-z · Cited by 17
Nano-Biocomposites for Food Packaging
Jiménez, A., & Ruseckaite, R. A. (2012) · Green energy and technology · doi:10.1007/978-1-4471-4108-2_15 · Cited by 21
Moving towards sustainable nanoengineered building materials with less energy consumption
Kumari, A., & Yadav, S. K. (2024) · Energy and Buildings · doi:10.1016/j.enbuild.2024.114475 · Cited by 20
Characterization of bulk agro‐green composites: Sisal fiber reinforced wheat flour thermoplastics
Sreekumar, P. A., Leblanc, N., & Saiter, J. M. (2009) · Polymer Composites · doi:10.1002/pc.20877 · Cited by 18
Cellulose nanoparticles as reinforcement in polymer nanocomposites
Ramires, E. C., & Dufresne, A. (2012) · Elsevier eBooks · doi:10.1533/9780857096241.1.131 · Cited by 19
Glass-Transition and Non-equilibrium States of Edible Films and Barriers
Harnkarnsujarit, N. (2016) · Elsevier eBooks · doi:10.1016/b978-0-08-100309-1.00019-5 · Cited by 16
Nanocelluloses: Emerging Building Blocks for Renewable Materials
Habibi, Y., & Lucia, L. A. (2012) · Wiley eBooks · doi:10.1002/9781118229484.ch3 · Cited by 15
Beigmohammadi, F., Barzoki, Z. M., & Shabanian, M. (2020) · Starch - Stärke · doi:10.1002/star.201900169 · Cited by 13
Drakopoulos, S. X., Karger-Kocsis, J., & Psarras, G. C. (2020) · Journal of Applied Polymer Science · doi:10.1002/app.49573 · Cited by 12
Properties of cellulose reinforced composites: A review
Ofem, M. I., Ene, E. B., Ubi, P. A., Odey, S., & Fakorede, D. O. (2020) · Nigerian Journal of Technology · doi:10.4314/njt.v39i2.9 · Cited by 14
“[71] reported that a soft interface domain compared to the surrounding matrix would yield a greater resistance to fracture, while the composite will be low in stiffness and strength.”
BackgroundPreparation of cellulose nanocomposites
Dufresne, A. (2011) · Elsevier eBooks · doi:10.1533/9780857092281.1.82 · Cited by 13
Bortolatto, R., Bittencourt, P. R. S., & Yamashita, F. (2022) · Journal of Applied Polymer Science · doi:10.1002/app.52288 · Cited by 12
Mechanical Properties of Eco-friendly Polymer Nanocomposites
Shahzad, A. (2015) · Advanced structured materials · doi:10.1007/978-81-322-2470-9_18 · Cited by 16
Nanocellulose: from biosources to nanofiber and their applications
Norfarhana, A. S., Ilyas, R. A., Nazrin, A., Sapuan, S. M., Syafiq, R. M. O., Khoo, P. S., Nordin, A. H., Omran, A. A. B., D., M. D. C., Hawanis, H. S. N., et al. (2023) · Physical Sciences Reviews · doi:10.1515/psr-2022-0008 · Cited by 11
Aksoy, B., Altay, B. N., Teke, A. G., & Demir, M. (2025) · Scientific Reports · doi:10.1038/s41598-025-06557-x · Cited by 10
Saieh, S. E., Eslam, H. A. K., Esmaeil, G., Bazyar, B., & Rajabi, M. A. (2019) · BioResources · doi:10.15376/biores.14.3.5278-5287 · Cited by 10
Reinforced nanocomposites for food packaging
Martelli‐Tosi, M., Esposto, B. S., da Silva, N. C., Tapia‐Blácido, D. R., & Jafari, S. M. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-815866-1.00014-5 · Cited by 10
Polymer nanocomposites reinforced with polysaccharide nanocrystals
Dufresne, A. (2011) · International Journal of Nanotechnology · doi:10.1504/ijnt.2011.044425 · Cited by 10
Vecbiškena, L., & Rozenberga, L. (2017) · Holzforschung · doi:10.1515/hf-2016-0187 · Cited by 9
Advanced Cellulosic Nanocomposite Materials
Cheng, Q., DeVallance, D. B., Wang, J., & Wang, S. (2011) · InTech eBooks · doi:10.5772/14050 · Cited by 11
“…cellulosic materials, such as wood fibers, cotton, ramie, tunicate mantles, sugar beet pulp, and bacterial cellulose (Beck-Candanedo et al., 2005; Chakraborty et al., 2005; Dufresne et al., 1997b; Edgar and Gray, 2002; Kvien et al., 2005; Lu et al., 2005; Pu et al., 2007; Zimmermann et al., 2004).”
BackgroundDas, P. P., Muduli, M., Borah, S., & Chaudhary, V. K. (2021) · Elsevier eBooks · doi:10.1016/b978-0-323-85204-3.00031-2 · Cited by 9
Microstructure and local mechanical properties of pea starch / protein composites
Jebalia, I., Kristiawan, M., Charalambides, M. N., Humphry-Baker, S. A., Valle, G. D., & Guessasma, S. (2022) · Composites Part C Open Access · doi:10.1016/j.jcomc.2022.100272 · Cited by 10
Das, K. (2015) · Advances in Polymer Technology · doi:10.1002/adv.21552 · Cited by 9
Green hybrid composites from cellulose nanocrystal
Rahimi, S. K., & Otaigbe, J. U. (2017) · Elsevier eBooks · doi:10.1016/b978-0-08-100791-4.00004-5 · Cited by 9
Farsi, M., Farsheh, A. T., Yousefi, H., & Tabari, H. Z. (2018) · Journal of Thermoplastic Composite Materials · doi:10.1177/0892705718799817 · Cited by 9
Nanocellulose as promising reinforcement materials for biopolymer nanocomposites: a review
Ngo, T. T., Nhi, T. T. Y., Cong, T. D., Thanh, H. T. T., & Mai, D. T. (2024) · Vietnam Journal of Science and Technology/Science and Technology · doi:10.15625/2525-2518/18831 · Cited by 8
“%) and Young's modulus (736 %), together with improved water resistance [74].”
BackgroundBio-nanocomposites for Modern Agricultural Applications
Menossi, M., Casalongué, C. A., & Álvarez, V. A. (2021) · Springer eBooks · doi:10.1007/978-981-15-6453-6_68-1 · Cited by 8
Characterization of Polysaccharide Nanocrystal‐Based Materials
Dufresne, A., & Lin, N. (2014) · Wiley eBooks · doi:10.1002/9783527689378.ch7 · Cited by 10
Polymer composites prepared from heat-treated starch and styrene–butadiene latex
Kim, S., Adkins, J., Aglan, H. A., Biswas, A., & Selling, G. W. (2014) · Journal of Elastomers & Plastics · doi:10.1177/0095244314538440 · Cited by 8
Maio, E. D., & Iannace, S. (2012) · Wiley eBooks · doi:10.1002/9781118097298.weoc013 · Cited by 7
Microcrystalline Cellulose-Based Eraser
Zhao, J., Yang, G., Ji, X., Li, C., Cai, X., Wang, Q., Liu, Y., & Zhang, F. (2024) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.3c07633 · Cited by 6
Cellulose/iron oxide hybrids as multifunctional pigments in thermoplastic starch based materials
Neves, M. C., Freire, C. S. R., Costa, B. F. O., Neto, C. P., & Trindade, T. (2013) · Cellulose · doi:10.1007/s10570-012-9859-1 · Cited by 6
Films and Coatings Produced from Biopolymers and Composites
Müller, C. M. O., Yamashita, F., Grossmann, M., & Mali, S. (2012) · Contemporary food engineering · doi:10.1201/b12048-6 · Cited by 8
Starch‐based composites using mature fine tailings as fillers
Moran, D. A., & Soares, J. B. P. (2017) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.22904 · Cited by 6
Costa, S. S., Silva, R., Alves, A. R. C., Guarieiro, L. L. N., & Machado, B. A. S. (2016) · Revista Virtual de Química · doi:10.21577/1984-6835.20160079 · Cited by 5
Cai, X., Li, C., Zhang, Y., Liu, Q., & Liu, W. (2016) · Journal of Polymer Research · doi:10.1007/s10965-015-0907-z · Cited by 5
Caracterização morfológica de nanocristais de celulose por microscopia de força atômica
Moraes, A. D. S., de Góes, T. S., Hausen, M. D. A., Morais, J. P. S., Rosa, M. D. F., de Menezes, A. J., Mattoso, L. H. C., & Leite, F. L. (2016) · Matéria (Rio de Janeiro) · doi:10.1590/s1517-707620160002.0050 · Cited by 5
Starch-based nanocomposites for gene delivery
Tariq, A., Bhawani, S. A., Nisar, M., Asaruddin, M. R., & Alotaibi, K. M. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-821230-1.00007-4 · Cited by 5
Effect of Silicone Carbide on the Elastic Properties of Starch‐Based Composites: A Three‐Phase Model
Rjafiallah, S., & Guessasma, S. (2010) · Macromolecular Materials and Engineering · doi:10.1002/mame.201000254 · Cited by 5
A Biobased Blend of Cellulose Diacetate with Starch
Xia, F.-X., Wang, X., Song, F., & Wang, Y. (2012) · Journal of Polymers and the Environment · doi:10.1007/s10924-012-0535-1 · Cited by 5
Chumwangwapee, S., Chingsungnoen, A., & Siri, S. (2016) · Forensic Science International Genetics · doi:10.1016/j.fsigen.2016.07.020 · Cited by 5
“Therefore, most CE structure can absorb water but not dissolve in water [29].”
BackgroundMechanical Properties of Starch‐Based Nanocomposites
Angellier‐Coussy, H., & Dufresne, A. (2013) · Wiley eBooks · doi:10.1002/9781118609958.ch12 · Cited by 4
Evaluation of the Biodegradation for Oil Absorbed Cassava Starch Film Filled with Kenaf Core Fiber
Walster, R. J., Rozyanty, A. R., & Kahar, A. W. M. (2018) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/429/1/012043 · Cited by 4
Arvanitoyannis, I. S., & Kassaveti, A. (2008) · Wiley eBooks · doi:10.1002/9780470391501.ch2 · Cited by 4
Poly(Vinyl Alcohol) Cellulose Nanocomposites
Cheng, Q., Wang, S., & Tong, Z. (2014) · Springer eBooks · doi:10.1007/978-3-642-45232-1_69 · Cited by 4
Tekiner, İ. H. (2024) · Turkish Journal of Agriculture - Food Science and Technology · doi:10.24925/turjaf.v12i6.966-977.6632 · Cited by 3
“A high compatibility occurs between starch matrix and fillers and the high improvement of the performances, including mechanical properties and water sensitivity because of the 3D hydrogen bonds network formed between different components (Y. Lu et al., 2005).”
BackgroundCellulose Nanocrystals: Particles and Polymer Nanocomposites
Abdallah, W., & Kamal, M. R. (2019) · Carl Hanser Verlag GmbH & Co. KG eBooks · doi:10.3139/9781569906361.014 · Cited by 3
Biodegradable Composites Based on Thermoplastic Starch and Talc Nanoparticles
Castillo, L. A., López, O. V., García, M. A., Villar, M. A., & Barbosa, S. E. (2017) · Wiley eBooks · doi:10.1002/9781119441632.ch85 · Cited by 5
Study of Cassava Starch Filled with Different Loading of Kenaf Core Fiber
Walster, R. J., Rozyanty, A. R., Wahab, M. K. A., & Musa, L. (2018) · Diffusion and defect data, solid state data. Part B, Solid state phenomena/Solid state phenomena · doi:10.4028/www.scientific.net/ssp.280.368 · Cited by 3
Nanocelluloses: Science and Technology
Habibi, Y. (2017) · Wiley eBooks · doi:10.1002/0471440264.pst657 · Cited by 3
Barley thermoplastic starch nanocomposite films reinforced with nanocellulose
Sharip, N. S., Yasim‐Anuar, T. A. T., Husin, H., & Norrrahim, M. N. F. (2023) · Physical Sciences Reviews · doi:10.1515/psr-2022-0025 · Cited by 2
Recent developments in sago starch thermoplastic bio-composites
Silviana, S., & Dalanta, F. (2023) · Physical Sciences Reviews · doi:10.1515/psr-2022-0017 · Cited by 2
Thermoplastic Cellulose Nanocomposites
Karimi, S. (2017) · Wiley eBooks · doi:10.1002/9783527689972.ch5 · Cited by 2
Freitas, P. A. V. (2022) · RiuNet (Universitat Politècnica de València) · doi:10.4995/thesis/10251/191380 · Cited by 4
Prétraitements de la cellulose pour une nanofibrillation par extrusion
Rol, F. (2019) · theses.fr (ABES) · doi:10.70675/f49f6e09z87acz432az8e86z4028cf7a2c4c · Cited by 4
Nanocelulose: breve revisão da produção a regulamentação
Damásio, R. A. P., Pereira, B. L. C., Gomes, F. J. B., de Oliveira, R. C., & Colodette, J. L. (2025) · RCMOS - Revista Científica Multidisciplinar O Saber · doi:10.51473/rcmos.v1i2.2025.1296 · Cited by 1
Thành, N. C., Duy, N. B. A., Dong, B. P., Huy, N. T., & Tran, V. A. (2025) · Polymer Bulletin · doi:10.1007/s00289-025-05984-0 · Cited by 1
Gecim, G., Kalemtaş, G., & Kalemtaş, A. (2026) · Cellulose · doi:10.1007/s10570-026-07191-0 · Cited by 1
“Similar results have also been reported on the starch biocomposites containing cottonseed cellulose crys-tallites (Lu et al. 2005).”
Souza, N. F., Filho, M. D. S. M. D. S., Rosa, M. D. F., Morais, J. P. S., do Nascimento, D. M., & Norões, A. K. M. (2010) · Portuguese National Funding Agency for Science, Research and Technology (RCAAP Project by FCT) · Cited by 3
Zhao, Y. (2019) · ERA: Education and Research Archive (University of Alberta) · doi:10.7939/r3-v9sj-kv22 · Cited by 1
Dufresne, A. (2015) · Taylor & Francis eBooks · doi:10.1081/e-enn3-120053539 · Cited by 1
Zhang, Y. (2012) · theses.fr (ABES) · doi:10.70675/01477824z7b45z48dfzbea6z27b4b25384c5 · Cited by 3
Novel Plastics and Foams from Starch and Polyurethanes
Lu, Y., & Tighzert, L. (2008) · Wiley eBooks · doi:10.1002/9780470391501.ch4
Self-citationSimão, R. D. S., de ALMEIDA, P. P., PASCUAL, N. B., & Laurindo, J. B. (2015) · Congresso Brasileiro de Engenharia Química em Iniciação Científica · doi:10.5151/chemeng-cobeqic2015-451-34073-261863
Noshirvani, N., Ghanbarzadeh, B., & Entezami, A. A. (2011)
Natural Nanofibers in Polymer Membranes for Energy Applications
Chiappone, A. (2016) · Wiley eBooks · doi:10.1002/9781118831823.ch10
Xiao, D., Qing, S., Yu, Z., & Xiao, H. (2019) · Journal of Plastic Film & Sheeting · doi:10.1177/8756087919846206
Molina, F. M. P. (2013) · doi:10.47749/t/unicamp.2013.905822 · Cited by 1
Thermoplastic Starch-Based Composites
Sreejit, V., Preetha, R., & Santhanalakshmi, G. (2025) · Advanced structured materials · doi:10.1007/978-3-031-93463-6_6
Bhargava, A. R., & Selvadass, M. (2026) · Current Agriculture Research Journal · doi:10.12944/carj.14.1.14
Metadata
- Authors
- Lu, Y., Weng, L., & Cao, X.
- Affiliations
- Iowa State University (US)
- State University of New York (US)
- Wuhan University (CN)
- Corresponding author
- Lu, Yongshang
- ORCID
- Cao, Xiaodong
- Venue
- Macromolecular Bioscience
- Publisher
- Wiley
- Published
- 2005-10-21
- Volume
- 5
- Issue
- 11
- Pages
- 1101-1107
- ISSN
- 1616-5187 (ISSN-L)
- 1616-5195
- OpenAlex
- W2157069443
- Cited by
- 200
- References
- 36
- Citations by year
- 2026: 2 · 2025: 5 · 2024: 5 · 2023: 5 · 2022: 10 · 2021: 10 · 2020: 14 · 2019: 15 · 2018: 12 · 2017: 19 · 2016: 13 · 2015: 11 · 2014: 13 · 2013: 9 · 2012: 11
- FWCI
- 2.38
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Macromolecular Bioscience (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
- Physical Sciences › Materials Science › Polymers and Plastics › Natural Fiber Reinforced Composites
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Keywords
- plasticized starch, glycerol plasticizer, cellulose crystallites, acid hydrolysis, filler-matrix interaction, tensile strength, Young's modulus, water absorption, water resistance, starch films, agricultural waste valorization
- MeSH terms
- Biodegradation, Environmental, Cellulose, Composite Resins, Cottonseed Oil, Crystallization, Plasticizers, Starch, Tensile Strength
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.