Oxidation of FeCrAl alloys at 500–900°C in dry O2
The DOI matches its Crossref record.
Abstract
This paper reports on the oxidation of a commercial FeCrAl alloy, Kanthal AF, in the temperature range 500–900°C. The samples are exposed isothermally in dry oxygen for up to 72 h using a thermo‐balance. In addition, 168 h exposures are carried out in a tube furnace. The exposed samples are investigated by grazing angle X‐ray diffraction (XRD), scanning electron microscopy/energy dispersive X‐ray analysis (SEM/EDX), and auger electron spectroscopy (AES). The rate of oxidation increases with temperature, the kinetics being parabolic in the range 700–900°C. At all exposure temperatures, most of the sample surface is covered by a thin smooth base oxide. In addition, RE‐rich particles, with a typical size of 1–3 μm form. At 800 and 900°C patches of thick oxide appear, featuring needle‐formed crystallites situated on top of the base oxide. The thick oxide usually forms around Y‐rich oxide particles. The concentration of iron and chromium in the oxide decreases with increasing temperature. XRD proves the formation of α‐Al 2 O 3 already at 700°C. The low temperature of formation of α‐Al 2 O 3 is attributed to the presence of chromium in the initial oxide. It is proposed that corundum nucleation is facilitated on a surface consisting of the isostructural escolaite, (Cr 2 O 3). After exposure at 900°C AES shows large amounts of Mg in the outer part of the oxide, MgAl 2 O 4 being detected by XRD together with γ‐ and γ‐Al 2 O 3.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Current Thoughts on Reactive Element Effects in Alumina-Forming Systems: In Memory of John Stringer
Naumenko, D., Pint, B. A., & Quadakkers, W. J. (2016) · Oxidation of Metals · doi:10.1007/s11085-016-9625-0 · Cited by 254
Bai, M., Reddy, L., & Hussain, T. (2018) · Corrosion Science · doi:10.1016/j.corsci.2018.02.047 · Cited by 81
Israelsson, N., Unocic, K. A., Hellström, K., Jonsson, T., Norell, M., Svensson, J.-E., & Johansson, L.-G. (2015) · Oxidation of Metals · doi:10.1007/s11085-015-9546-3 · Cited by 54
Self-citationEklund, J., Jönsson, B., Persdotter, A., Liske, J., Svensson, J.-E., & Jonsson, T. (2018) · Corrosion Science · doi:10.1016/j.corsci.2018.09.004 · Cited by 55
Self-citationZhou, R., Wang, F., Xu, K., Yuan, Y., Chen, L., Lou, M., Khvan, A. V., & Chang, K. (2023) · Materials Characterization · doi:10.1016/j.matchar.2023.113221 · Cited by 27
Eklund, J., Persdotter, A., Hanif, I., Bigdeli, S., & Jonsson, T. (2021) · Corrosion Science · doi:10.1016/j.corsci.2021.109584 · Cited by 23
“The transient alumina scale generally contains significant amounts of Fe and Cr which may negatively influence the resistance to alkali compounds and water vapour [20].”
BackgroundBigdeli, S., Kjellqvist, L., Naraghi, R., Höglund, L., Larsson, H., & Jonsson, T. (2021) · Journal of Phase Equilibria and Diffusion · doi:10.1007/s11669-021-00893-x · Cited by 19
Eklund, J., Paz, M. D., Jönsson, B., Liske, J., Svensson, J., & Jonsson, T. (2019) · Materials and Corrosion · doi:10.1002/maco.201810618 · Cited by 18
Self-citationBreakdown mechanism of γ-Al2O3 on Ni2Al3 coatings exposed in a biomass fired power plant
Wu, D. L., Dahl, K. V., Grumsen, F. B., Christiansen, T. L., Montgomery, M., & Hald, J. (2020) · Corrosion Science · doi:10.1016/j.corsci.2020.108583 · Cited by 16
Wu, D., Liu, S., Yuan, Z., Cao, P., Wei, X., & Zhang, C. (2021) · Journal of Thermal Spray Technology · doi:10.1007/s11666-021-01248-1 · Cited by 14
Metadata
- Authors
- Josefsson, H., Liu, F., Svensson, J. ‐., Halvarsson, M., & Johansson, L. ‐.
- Venue
- Materials and Corrosion
- Publisher
- Wiley
- Published
- 2005-11
- Volume
- 56
- Issue
- 11
- Pages
- 801-805
- ISSN
- 0043-2822 (ISSN-L)
- 0947-5117
- 1521-4176
- OpenAlex
- W1988459922
- Cited by
- 110
- References
- 0
- FWCI
- 4.61
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.