(Co)polymers of L‐lactide, 2. Mechanical properties
The DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.
Abstract
The effect of copolymerization of L‐lactide with several lactones and cyclic carbonates and the processing variables in compression moulding of poly(L‐lactide) homopolymers on the mechanical properties was investigated. Sharp maxima in the impact strength versus comonomer composition and heat of fusion were obtained, reflecting the important role of the presence of a crystalline fraction in the material. Crystalline domains increase the interconnectivity of a physical polylactide network and decrease the molecular weight between these physical crosslinks. The brittle strength concomitantly increases, and as the yield stress remains more or less constant, an increase in impact strength is observed. Very high crystalline as‐polymerized poly(L‐lactide) prepared with less active catalysts on the other hand has an extremely low entanglement density and therefore a low brittle tensile strength.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Fischer, E. W., Sterzel, H. J., & Wegner, G. (1973) · Kolloid-Zeitschrift und Zeitschrift für Polymere · doi:10.1007/bf01498927 · Cited by 1,704
Biodegradable polymers for use in surgery—polyglycolic/poly(actic acid) homo- and copolymers: 1
Gilding, D. K., & Reed, A. M. (1979) · Polymer · doi:10.1016/0032-3861(79)90009-0 · Cited by 1,345
The Physical Properties of Polymers
Simpson, W. (1963) · International Journal of Electrical Engineering & Education · doi:10.1177/002072096300100111 · Cited by 961
Crystal structure, conformation and morphology of solution-spun poly(L-lactide) fibers
Hoogsteen, W., Postema, A. R., Pennings, A. J., Ten Brinke, G., & Zugenmaier, P. (1990) · Macromolecules · doi:10.1021/ma00204a041 · Cited by 864
Self-citationPitt, G. G., Gratzl, M. M., Kimmel, G. L., Surles, J., & Sohindler, A. (1981) · Biomaterials · doi:10.1016/0142-9612(81)90060-0 · Cited by 857
Biodegradable poly(lactic acid) polymers
Kulkarni, R. K., Moore, E. G., Hegyeli, A. F., & Leonard, F. (1971) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820050305 · Cited by 799
Bioresorbability and biocompatibility of aliphatic polyesters
Vert, M., Li, S. M., Spenlehauer, G., & Guerin, P. (1992) · Journal of Materials Science: Materials in Medicine · doi:10.1007/bf00701240 · Cited by 770
Molecular morphology in semicrystalline polymers
Flory, P. J., & Yoon, D. Y. (1978) · Nature · doi:10.1038/272226a0 · Cited by 489
Li, S., Garreau, H., & Vert, M. (1990) · Journal of Materials Science: Materials in Medicine · doi:10.1007/bf00701077 · Cited by 488
Lewis acid catalyzed polymerization of L-lactide. Kinetics and mechanism of the bulk polymerization
Nijenhuis, A. J., Grijpma, D. W., & Pennings, A. J. (1992) · Macromolecules · doi:10.1021/ma00050a006 · Cited by 407
Self-citation
Research works printed but not linked: 3
- Lipinsky E. S., 1986, Chem. Eng. Prog., 82, 26
- Tunc D. C., Chem. Abstr., 112, P185857g
- Kausch H. H., 1986, Polymer Fracture
Cited by
Items 101–190 of 190
Toughening of poly(l-lactic acid) with Cu3BTC2 metal organic framework crystals
Kathuria, A., Abiad, M. G., & Auras, R. A. (2013) · Polymer · doi:10.1016/j.polymer.2013.11.005 · Cited by 34
Teng, C., Yang, K., Ji, P., & Yu, M. (2004) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.20412 · Cited by 34
Medical grade polylactide, copolyesters and polydioxanone: Rheological properties and melt stability
Ahlinder, A., Fuoco, T., & Finne‐Wistrand, A. (2018) · Polymer Testing · doi:10.1016/j.polymertesting.2018.10.007 · Cited by 35
Sonseca, Á., Madani, S., Muñoz‐Bonilla, A., Fernández‐García, M., Peponi, L., Leonés, A., Rodríguez, G., Echeverría, C., & López, D. (2020) · Nanomaterials · doi:10.3390/nano10061065 · Cited by 36
Ullah, M. S., Yazıcı, N., Wis, A. A., Özkoç, G., & Kodal, M. (2022) · Polymer Composites · doi:10.1002/pc.26483 · Cited by 33
Pluta, M., & Piórkowska, E. (2015) · Polymer Testing · doi:10.1016/j.polymertesting.2015.06.014 · Cited by 39
Xu, P., Ma, P., Hoch, M., Arnoldi, E., Cai, X., Dong, W., & Chen, M. (2016) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2016.05.010 · Cited by 31
Yu, Y., Qian, K., Yang, H., Yao, L., & Zhang, Y. J. (2022) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2022.117497 · Cited by 29
Synthesis and properties of collagen/polylactic acid blends
Yang, X., Yuan, M., Li, W., & Zhang, G. (2004) · Journal of Applied Polymer Science · doi:10.1002/app.21056 · Cited by 33
Biodegradable Polymers in Medicine
Piskin, E. (2002) · Springer eBooks · doi:10.1007/978-94-017-1217-0_10 · Cited by 33
Pluta, M., & Piórkowska, E. (2014) · Polymer Testing · doi:10.1016/j.polymertesting.2014.11.011 · Cited by 28
Polylactides with “green” plasticizers: Influence of isomer composition
Arias, V., Höglund, A., Odelius, K., & Albertsson, A. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.39446 · Cited by 28
Dynamic mechanical and thermal properties of polylactide-layered silicate nanocomposites
Mohapatra, A. K., Mohanty, S., & Nayak, S. K. (2013) · Journal of Thermoplastic Composite Materials · doi:10.1177/0892705712454446 · Cited by 28
Grillo, A., Rusconi, Y., D’Alterio, M. C., Rosa, C. D., Talarico, G., & Poater, A. (2024) · International Journal of Molecular Sciences · doi:10.3390/ijms25031647 · Cited by 28
He, A., Han, C. C.-C., & Yang, G. (2004) · Polymer · doi:10.1016/j.polymer.2004.08.076 · Cited by 27
Rheological, Thermal, and Foaming Behaviors of Different Polylactide Grades
Nofar, M. (2018) · International Journal of Material Science and Research · doi:10.18689/ijmsr-1000103 · Cited by 23
Xu, X., Zhang, J., Filion, T. M., Akalin, A., & Song, J. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c06178 · Cited by 23
Yi, W., Li, L., Hao, Z., Jiang, M., Lu, C. J., Shen, Y., & Chao, Z. (2017) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.6b04082 · Cited by 29
A facile synthesis of a novel polyacetal containing trehalose residue in the main chain
Teramoto, N., Arai, Y., Shibasaki, Y., & Shibata, M. (2004) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2003.03.002 · Cited by 22
Ren, J., Zhang, Z., Feng, Y., Li, J., & Yuan, W. (2010) · Journal of Applied Polymer Science · doi:10.1002/app.32590 · Cited by 25
Masutani, K., & Kimura, Y. (2016) · Polymer International · doi:10.1002/pi.5172 · Cited by 22
Verbeeten, W. M. H., & Lorenzo-Bañuelos, M. (2022) · Additive manufacturing · doi:10.1016/j.addma.2022.103079 · Cited by 28
Wilberforce, S. I. J., Finlayson, C. E., Best, S. M., & Cameron, R. E. (2011) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2011.03.017 · Cited by 20
Improved Biodegradation and Thermal Properties of Poly(lactic acid)/Layered Silicate Nanocomposites
Panigrahi, M., Singh, N. K., Gautam, R. K., Banik, R. M., & Maiti, P. (2010) · Composite Interfaces · doi:10.1163/092764410x490563 · Cited by 20
Waste Management for Polymers in Food Packaging Industries
Arvanitoyannis, I. S. (2012) · Elsevier eBooks · doi:10.1016/b978-1-4557-3112-1.00014-4 · Cited by 23
Segmental copolymers of condensation polyesters and polylactide
Florjańczyk, Z., Jóźwiak, A., Kundys, A., Plichta, A., Dębowski, M., Rokicki, G., Parzuchowski, P. G., Lisowska, P., & Zychewicz, A. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2012.03.035 · Cited by 18
Wu, J., Wu, C., Kuo, M. C., & Tsai, Y. (2016) · Journal of Polymers and the Environment · doi:10.1007/s10924-016-0755-x · Cited by 19
Ahlinder, A., Fuoco, T., López, Á. M., Yassin, M. A., Mustafa, K., & Finne‐Wistrand, A. (2019) · Journal of Applied Polymer Science · doi:10.1002/app.48550 · Cited by 19
Marra, A., Silvestre, C., Kujundziski, A. P., Chamovska, D., & Duraccio, D. (2016) · Polymer Bulletin · doi:10.1007/s00289-016-1881-2 · Cited by 18
Synergistic Effects of Chain Extender and Nanoclay on the Crystallization Behaviour of Polylactide
Nofar, M. (2018) · International Journal of Material Science and Research · doi:10.18689/ijmsr-1000101 · Cited by 18
Ramachandran, K., Miscioscia, R., Filippo, G., Pandolfi, G., Luccio, T. D., & Kornfield, J. A. (2018) · Polymers · doi:10.3390/polym10030288 · Cited by 17
Properties Study of Poly(L-lactic acid)/Polyurethane-Blend Film
Zhu, G.-Q., Wang, F., Tan, H., Gao, Q.-C., & Liu, Y. (2012) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2012.716133 · Cited by 17
Jung, Y., Lee, S., Kim, S., Lim, J., & Kim, S. H. (2012) · Journal of Biomaterials Science Polymer Edition · doi:10.1080/09205063.2012.690281 · Cited by 18
Wu, J., Yu, D., Chan, C., Kim, J., & Mai, Y. (2000) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(20000516)76:7<1000::aid-app3>3.0.co;2-x · Cited by 204
PRODUCTION AND PURIFICATION OF LACTIC ACID AND LACTIDE
Groot, W., van Krieken, J., Sliekersl, O., & de Vos, S. (2022) · Wiley eBooks · doi:10.1002/9781119767480.ch1 · Cited by 21
Biodegradable Polyester / Layered Silicate Nanocomposites
Maiti, P., Batt, C. A., & Giannelis, E. P. (2002) · MRS Proceedings · doi:10.1557/proc-740-i5.3 · Cited by 16
Kivijärvi, T., Pappalardo, D., Olsén, P., & Finne‐Wistrand, A. (2020) · European Polymer Journal · doi:10.1016/j.eurpolymj.2020.109703 · Cited by 16
High Toughness and Fast Crystallization Poly(Lactic Acid)/Polyamide 11/SiO2 Composites
Wu, J., Chen, C.-W., Kuo, M. C., Yen, M., & Lee, K.-Y. (2017) · Journal of Polymers and the Environment · doi:10.1007/s10924-017-0977-6 · Cited by 14
Nofar, M., Mohammadi, M., & Carreau, P. J. (2021) · Journal of Rheology · doi:10.1122/8.0000234 · Cited by 14
Eraslan, K., Altınbay, A., & Nofar, M. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.132936 · Cited by 14
Ahlinder, A., Charlon, S., Fuoco, T., Soulestin, J., & Finne‐Wistrand, A. (2020) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2020.109372 · Cited by 13
Tensile properties and in vitro degradation of P(TMC-co-LLA) elastomers
Cork, J., Whittaker, A. K., Cooper-White, J. J., & Grøndahl, L. (2015) · Journal of Materials Chemistry B · doi:10.1039/c5tb00202h · Cited by 13
Telechelic poly( L ‐lactic acid) for dilactide production and prepolymer applications
Inkinen, S., Nobes, G. A. R., & Södergård, A. (2010) · Journal of Applied Polymer Science · doi:10.1002/app.32763 · Cited by 12
Contact mechanics in glassy polymers
Breemen, V. L. L. (2009) · TU/e Research Portal · doi:10.6100/ir642891 · Cited by 13
Hayashi, M., Shibata, K., Kawarazaki, I., & Takasu, A. (2018) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201800127 · Cited by 11
Kim, G. H., Hwang, S. W., Jung, B. N., Kang, D., Shim, J. K., & Seo, K. H. (2020) · Polymers · doi:10.3390/polym12102231 · Cited by 12
Tuna, S., & Akkoyun, M. (2023) · Journal of Applied Polymer Science · doi:10.1002/app.54849 · Cited by 9
Mechanical properties of poly( l ‐lactic acid) composites filled with mesoporous silica
Liang, J., & Li, F. (2015) · Polymer Composites · doi:10.1002/pc.23674 · Cited by 9
Toughening Modification of Poly(lactic acid) via Melt Blending
Liu, H., & Zhang, J. (2012) · ACS symposium series · doi:10.1021/bk-2012-1105.ch003 · Cited by 9
Altuntaş, E., Salan, T., Karaoğul, E., & Aydemir, D. (2017) · International Journal of Polymer Analysis and Characterization · doi:10.1080/1023666x.2017.1391738 · Cited by 9
Production, Chemistry and Properties of Polylactides
Södergård, A., & Inkinen, S. (2011) · Wiley eBooks · doi:10.1002/9781119994312.ch3 · Cited by 13
Kowalewska, A., Herc, A. S., Bojda, J., Nowacka, M., Svyntkivska, M., Piórkowska, E., Kaczorowski, W., & Szymański, W. (2021) · Polymers · doi:10.3390/polym13071033 · Cited by 8
Ghaffari, A., Matter, B. A., Hartman, R. R., Bourne, D. W. A., Wang, Y., Choi, S. H., & Kompella, U. B. (2024) · Pharmaceutics · doi:10.3390/pharmaceutics16070895 · Cited by 8
Elastic Polymeric Network Structure for Slow Release Drug Delivery Systems
Helaly, F. M., Essawy, H., & Shabana, M. A. (2011) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2010.543234 · Cited by 8
Kim, D., Hikima, Y., & Ohshima, M. (2021) · Journal of Applied Polymer Science · doi:10.1002/app.51890 · Cited by 8
Development of biodegradable polymer nonwoven using green solvents and their applications: a review
Islam, M. T., Jahan, M. S., Hossen, M. A., Afroz, E. A., Saleem, M., Ashraf, H. T., Imran, H. M., Jinxing, W., Yu, B., Hussain, M., et al. (2025) · Polymer Bulletin · doi:10.1007/s00289-025-06003-y · Cited by 12
Su, Y., Ran, S., Fang, Z., & Guo, Z. (2020) · Applied Physics A · doi:10.1007/s00339-020-03473-x · Cited by 7
Improvement of Crystallization and Mechanical Properties of PLA by Means of Clay Nanocomposite
Okamoto, H., Nakano, M., Ouchi, M., Usuki, A., & Kageyama, Y. (2003) · MRS Proceedings · doi:10.1557/proc-791-q11.10 · Cited by 7
INDUSTRIAL PRODUCTION OF HIGH‐MOLECULAR‐WEIGHT POLY(LACTIC ACID)
Södergård, A., Stolt, M., & Inkinen, S. (2022) · Wiley eBooks · doi:10.1002/9781119767480.ch3 · Cited by 11
Biodegradable polyesters based on star-shaped lactic acid oligomers
Frydrych, A., Florjańczyk, Z., Charazińska, M., & Kąkol, M. (2016) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2016.02.021 · Cited by 5
Kuehl, B., Hohmann, A., Lee, T., Forrester, M. J., Hernández, N., Dietrich, H., Smith, C. S., Musselman, S., Tran, G., & Cochran, E. W. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c10496 · Cited by 5
Ketabchi, M. R., Khalid, M., Ratnam, C. T., Michael, F. M., & Walvekar, R. (2019) · Plastics Rubber and Composites Macromolecular Engineering · doi:10.1080/14658011.2019.1570444 · Cited by 6
Thermal properties of the multi-stereo block poly(lactic acid)s with various block lengths
Widhianto, Y. W., Yamamoto, M., Masutani, K., Kimura, Y., & Yamane, H. (2017) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2017.06.016 · Cited by 6
Poly(lactide)s as Robust Renewable Materials
Becker, J. M., & Dove, A. P. (2011) · Wiley eBooks · doi:10.1002/9783527636167.ch9 · Cited by 11
Agaeva, M. U., Filippenko, V. I., Mankaev, B. N., Serova, V. A., Lyssenko, K. A., Chernikova, E. V., Egorov, M. P., & Karlov, S. S. (2024) · Organometallics · doi:10.1021/acs.organomet.4c00078 · Cited by 3
Chartarrayawadee, W., Too, C. O., Ross, S., Ross, G. M., Hongsith, N., & Ratchawet, A. (2017) · Polymer Bulletin · doi:10.1007/s00289-017-2200-2 · Cited by 3
Tuna, S., & Akkoyun, M. (2025) · Cellular Polymers · doi:10.1177/02624893261416640 · Cited by 2
Microdeformation in Poly‐L‐lactide and Poly‐L‐lactide + Hydroxyapatite Nanocomposite Thin Films
Plummer, C. J. G., Choo, C. K. C., Delabarde, C., & Månson, J. E. (2012) · Macromolecular Symposia · doi:10.1002/masy.201250520 · Cited by 2
Zhu, G.-Q., Wang, F., Xu, K., Dong, S., & Liu, Y. (2013) · Research on Chemical Intermediates · doi:10.1007/s11164-013-1256-3 · Cited by 2
Synthesis and properties of block copolymers of enantiomeric polylactide and biopolyester
Lee, S., Jin, Y., Lim, K. T., Lee, C.-H., Chun, J. H., & Lee, W. (2019) · Molecular Crystals and Liquid Crystals · doi:10.1080/15421406.2019.1651063 · Cited by 1
Han, D. H., Kim, Y. M., Lee, D. B., Lee, K. H., & Kim, H. (2023) · Korean Journal of Materials Research · doi:10.3740/mrsk.2023.33.8.323 · Cited by 1
Du, Y., Liu, G., Zhou, L., Hu, J., Wang, W., Bian, X., Duan, R., & Chen, X. (2026) · Macromolecules · doi:10.1021/acs.macromol.5c03165 · Cited by 1
Features of obtaining and properties of binary blends of polylactides. Review
Маsyuk, A. S., Kysil, K. V., Skorokhoda, V. Y., Katruk, D. S., Kulish, B. I., & Levytskiy, V. Y. (2020) · Chemistry Technology and Application of Substances · doi:10.23939/ctas2020.02.146 · Cited by 1
Cameron, J., Luccio, T. D., Barr, J., Rocher, L., Kim, E. A., Menary, G., Lennon, A., & Kornfield, J. A. (2024) · Acta Biomaterialia · doi:10.1016/j.actbio.2024.10.048 · Cited by 1
Poly (Lactic Acid) Thermoplastic Composites from Renewable Materials
Khodabakhshi, K. (2017) · Wiley eBooks · doi:10.1002/9781119441632.ch43 · Cited by 1
Cellulose Reinforced Green Foams
Obradovic, J., Obradovic, J., Obradovic, J., Lange, C., Lange, C., Lange, C., Gustafsson, J., Gustafsson, J., Gustafsson, J., Fardim, P., et al. (2018) · doi:10.1002/9781119323327.ch10 · Cited by 1
Effects of Different Processing Techniques on the Properties of PLA
Zheng, H. J., Wang, Y. R., Zhao, Z. W., & Zhang, L. Q. (2012) · Advanced materials research · doi:10.4028/www.scientific.net/amr.550-553.2932
Release of sodium fluoride from poly (L-lactic acid) implants characterized by thermal history
Maxa, J., & Dittrich, M. (2001) · Journal of Materials Science Materials in Medicine · doi:10.1023/a:1013972919077
Innovative PLA Bead Foam Technology
Nofar, M., Tabatabaei, A., & Park, C. B. (2016) · doi:10.1201/9781315369365-15
Naeini, A. T. (2017) · TSpace (University of Toronto)
Yu, Y., Liu, H., Qian, K., Yang, H., McGehee, M., Gu, J., Luo, D., Yao, L., & Zhang, Y. J. (2019)
(2018) · Elsevier eBooks · doi:10.1016/b978-0-12-813991-2.16001-9
Innovative PLA Bead Foam Technology
(2016) · Polymeric foams series · doi:10.1201/9781315369365-7
Izard, T. (2022) · Open Access Victoria University of Wellington | Te Herenga Waka (Figshare) · doi:10.26686/wgtn.21211190
PLA/PBAT Based Bioblend Systems for Green Packaging Applications
Altınbay, A., & Nofar, M. (2024) · Elsevier eBooks · doi:10.1016/b978-0-323-95486-0.00066-1
Blends of modified PLA and biopolyamides for additive manufacturing
García-Masabet, V. (2023) · UPCommons institutional repository (Universitat Politècnica de Catalunya) · doi:10.5821/dissertation-2117-404652
Pluta, M., Bojda, J., & Piórkowska, E. (2025) · International Journal of Molecular Sciences · doi:10.3390/ijms262110422
Poly-100: One-Pot Toughening of Polylactide with Soybean-Derived Reactive Elastomers
Kuehl, B., Garg, V., Hohmann, A., Becker, A., Forrester, M. J., Roberts-Dobie, J., Knepper, J., McCaslin, A., Goyal, S., Dietrich, H., et al. (2026) · Biomacromolecules · doi:10.1021/acs.biomac.6c00191
Zeng, Z., Wu, C., Li, Y. H., Xiao, M., Huang, S., Wang, S., & Meng, Y. (2026) · Journal of Polymer Science · doi:10.1002/pola.70183
Metadata
- Authors
- Grijpma, D. W., & Pennings, A. J.
- Affiliations
- University of Groningen (NL)
- ORCID
- Grijpma, Dirk W.
- Venue
- Macromolecular Chemistry and Physics
- Publisher
- Wiley
- Published
- 1994-05
- Volume
- 195
- Issue
- 5
- Pages
- 1649-1663
- ISSN
- 1022-1352 (ISSN-L)
- 1521-3935
- OpenAlex
- W1981480787
- Cited by
- 191
- References
- 28
- Citations by year
- 2026: 3 · 2025: 3 · 2024: 6 · 2023: 3 · 2022: 9 · 2021: 6 · 2020: 8 · 2019: 9 · 2018: 12 · 2017: 10 · 2016: 17 · 2015: 14 · 2014: 4 · 2013: 11 · 2012: 14
- FWCI
- 2.34
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Macromolecular Chemistry and Physics (publishedVersion)
- University of Groningen research database (University of Groningen / Centre for Information Technology) (publishedVersion)
- University of Groningen research database (University of Groningen / Centre for Information Technology) (submittedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer composites and self-healing
- Keywords
- poly(L-lactic acid), copolymers, lactones, cyclic carbonates, mechanical properties, impact strength, crystallinity, compression molding, physical crosslinks, entanglement density, yield stress, tensile strength, catalytic activity
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.