Synthesis and characterization of poly(L‐lactic acid)–poly(ε‐caprolactone) multiblock copolymers by melt polycondensation
Open accessThe DOI matches its Crossref record; 14 of the 14 references it cites were found in a registry or an index.
Abstract
An Erratum has been published for this article in J. Polym. Sci. Part A: Polym. Chem. (2004) 42(22) 5845 New multiblock copolymers derived from poly(L‐lactic acid) (PLLA) and poly(ε‐caprolactone) (PCL) were prepared with the coupling reaction between PLLA and PCL oligomers with NCO terminals. Fourier transform infrared (FTIR), 13 C NMR, and differential scanning calorimetry (DSC) were used to characterize the copolymers and the results showed that PLLA and PCL were coupled by the reaction between NCO groups at the end of the PCL and OH (or COOH) groups at the end of the PLLA. DSC data indicated that the different compositions of PLLA and PCL had an influence on the thermal and crystallization properties including the glass‐transition temperature (Tg), melting temperature (TM), crystallizing temperature (Tc), melting enthalpy (Δ Hm), crystallizing enthalpy (Δ Hc), and crystallinity. Gel permeation chromatography (GPC) was employed to study the effect of the composition of PLLA and PCL and reaction time on the molecular weight and the molecular weight distribution of the copolymers. The weight‐average molecular weight of PLLA–PCL multiblock copolymers was up to 180,000 at a composition of 60% PLLA and 40% PCL, whereas that of the homopolymer of PLLA was only 14,000. A polarized optical microscope was used to observe the crystalline morphology of copolymers; the results showed that all polymers exhibited a spherulitic morphology. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5045–5053, 2004
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Properties of lactic acid based polymers and their correlation with composition
Södergård, A., & Stolt, M. (2002) · Progress in Polymer Science · doi:10.1016/s0079-6700(02)00012-6 · Cited by 1,461
Large-scale production, properties and commercial applications of polylactic acid polymers
Lunt, J. (1998) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(97)00148-1 · Cited by 1,366
Preparation and characterization of biodegradable PLA polymeric blends
Chen, C.-C., Chueh, J.-Y., Tseng, H., Huang, H.-M., & Lee, S.-Y. (2003) · Biomaterials · doi:10.1016/s0142-9612(02)00466-0 · Cited by 583
Ovitt, T. M., & Coates, G. W. (1999) · Journal of the American Chemical Society · doi:10.1021/ja990088k · Cited by 502
Polylactones: 31. Sn(II)octoate-initiated polymerization of L-lactide: a mechanistic study
Kricheldorf, H. R., Kreiser-Saunders, I., & Boettcher, C. (1995) · Polymer · doi:10.1016/0032-3861(95)93928-f · Cited by 411
Structure and mechanical properties of poly(?,?-lactic acid)/poly(ɛ-caprolactone) blends
Broz, M. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00314-4 · Cited by 388
Dell'Erba, R., Groeninckx, G., Maglio, G., Malinconico, M., & Migliozzi, A. (2001) · Polymer · doi:10.1016/s0032-3861(01)00269-5 · Cited by 318
Modification of poly(L‐lactides) by blending: mechanical and hydrolytic behavior
Hiljanen‐Vainio, M., Varpomaa, P., Seppälä, J., & Törmälä, P. (1996) · Macromolecular Chemistry and Physics · doi:10.1002/macp.1996.021970427 · Cited by 249
(Co)polymers of L‐lactide, 2. Mechanical properties
Grijpma, D. W., & Pennings, A. J. (1994) · Macromolecular Chemistry and Physics · doi:10.1002/macp.1994.021950516 · Cited by 191
Synthesis and Characterization of Poly(l-lactide)−Poly(ε-caprolactone) Multiblock Copolymers
Jeon, O., Lee, S.-H., Kim, S. H., Lee, Y. M., & Kim, Y. H. (2003) · Macromolecules · doi:10.1021/ma034006v · Cited by 168
Cited by
Fernández, J., Etxeberria, A., & Sarasua, J.-R. (2012) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2012.01.003 · Cited by 217
Xu, H., Teng, C., & Yu, M. (2006) · Polymer · doi:10.1016/j.polymer.2006.03.090 · Cited by 113
Garkhal, K., Verma, S., Jonnalagadda, S., & Kumar, N. (2007) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.22031 · Cited by 110
Zhang, J., Xu, J., Wang, H., Jin, W., & Li, J. (2009) · Materials Science and Engineering: C · doi:10.1016/j.msec.2008.08.002 · Cited by 60
L,L‐Lactide and ε‐Caprolactone Block Copolymers by a ‘Poly(L,L‐lactide) Block First’ Route
Florczak, M., Libiszowski, J., Mosnacek, J., Duda, A., & Penczek, S. (2007) · Macromolecular Rapid Communications · doi:10.1002/marc.200700160 · Cited by 57
Metadata
- Authors
- Teng, C., Yang, K., Ji, P., & Yu, M.
- Venue
- Journal of Polymer Science Part A: Polymer Chemistry
- Publisher
- Wiley
- Published
- 2004-09-03
- Volume
- 42
- Issue
- 20
- Pages
- 5045-5053
- ISSN
- 0887-624X (ISSN-L)
- 1099-0518
- OpenAlex
- W2083841370
- Cited by
- 34
- References
- 14
- FWCI
- 2.17
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Synthesis and characterization of poly(L‐lactic acid)–poly(ε‐caprolactone) multiblock copolymers by melt polycondensation. https://app.cochat.ai/papers/10.1002/pola.20412
- The paper
- Teng, C., Yang, K., Ji, P., & Yu, M. (2004). Synthesis and characterization of poly(L‐lactic acid)–poly(ε‐caprolactone) multiblock copolymers by melt polycondensation. Journal of Polymer Science Part A: Polymer Chemistry. https://doi.org/10.1002/pola.20412
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.