The DOI matches its Crossref record; 60 of the 60 references it cites were found in a registry or an index.
A Review on Pineapple Leaf Fibers, Sisal Fibers and Their Biocomposites
Abstract
Summary: The use of lignocellulosic fibers, pineapple leaf fiber (PALF) and sisal as reinforcements in thermoplastic and thermosetting resins for developing low cost and lightweight composites is an emerging field of research in polymer science and technology. Although, these biofibers have several advantages, such as low densities, low cost, nonabrasive nature, high filling level possible, low energy consumption, high specific properties, biodegradability, etc., over synthetic fibers, the absorption of moisture by untreated biofibers, poor wettability, and insufficient adhesion between the polymer matrix and fiber deteriorate the mechanical properties of composites made up of these biofibers. Therefore, the modification of these fibers is a key area of research at present to obtain optimum fiber‐matrix properties. This review article is concerned with the structure, composition and properties of PALF and sisal, the chemical modifications of these fibers and PALF/sisal‐reinforced thermosets, thermoplastics, rubber, cement, hybrids and biocomposites. Scanning electron micrograph of tensile fractured surface of alkali treated sisal fiber (magnification ×500). magnified imageScanning electron micrograph of tensile fractured surface of alkali treated sisal fiber (magnification ×500).
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Composites reinforced with cellulose based fibres
Bledzki, A. (1999) · Progress in Polymer Science · doi:10.1016/s0079-6700(98)00018-5 · Cited by 4,696
Encyclopedia of polymer science and engineering
Bawn, C. S. H. (1987) · Polymer · doi:10.1016/0032-3861(87)90274-6 · Cited by 4,203
The elasticity and strength of paper and other fibrous materials
Cox, H. L. (1952) · British Journal of Applied Physics · doi:10.1088/0508-3443/3/3/302 · Cited by 3,586
Mechanical properties of polymers and composites
Moore, D. R. (1975) · Polymer · doi:10.1016/0032-3861(75)90022-1 · Cited by 1,477
Sisal fibre and its composites: a review of recent developments
Li, Y., Mai, Y.-W., & Ye, L. (2000) · Composites Science and Technology · doi:10.1016/s0266-3538(00)00101-9 · Cited by 1,212
Surface modifications of natural fibers and performance of the resulting biocomposites: An overview
Mohanty, A. K., Misra, M., & Drzal, L. T. (2001) · Composite Interfaces · doi:10.1163/156855401753255422 · Cited by 1,072
Self-citationRong, M. Z., Zhang, M. Q., Liu, Y., Yang, G. C., & Zeng, H. M. (2001) · Composites Science and Technology · doi:10.1016/s0266-3538(01)00046-x · Cited by 1,047
(2006) · CRC Press eBooks · doi:10.1201/9781420015270 · Cited by 914
Properties and modification methods for vegetable fibers for natural fiber composites
Bledzki, A. K., Reihmane, S., & Gassan, J. (1996) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19960222)59:8<1329::aid-app17>3.0.co;2-0 · Cited by 906
Studies on mechanical performance of biofibre/glass reinforced polyester hybrid composites
Mishra, S., Mohanty, A. K., Drzal, L. T., Misra, M., Parija, S., Nayak, S. K., & Tripathy, S. S. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00084-8 · Cited by 873
Self-citationJoseph, K., Thomas, S., & Pavithran, C. (1996) · Polymer · doi:10.1016/0032-3861(96)00144-9 · Cited by 742
Durability of alkali-sensitive sisal and coconut fibres in cement mortar composites
Filho, R. D. T., Scrivener, K. L., England, G. L., & Ghavami, K. (2000) · Cement and Concrete Composites · doi:10.1016/s0958-9465(99)00039-6 · Cited by 575
Joseph, P. (1999) · Composites Science and Technology · doi:10.1016/s0266-3538(99)00024-x · Cited by 565
The thermal and crystallisation studies of short sisal fibre reinforced polypropylene composites
Joseph, P. V., Joseph, K., Thomas, S., Pillai, C. K. S., Prasad, V. S., Groeninckx, G., & Sarkissova, M. (2003) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/s1359-835x(02)00185-9 · Cited by 530
Biofiber‐reinforced polypropylene composites
Karnani, R., Krishnan, M., & Narayan, R. (1997) · Polymer Engineering & Science · doi:10.1002/pen.11691 · Cited by 491
The effect of silane treatment on the mechanical and physical properties of sisal-epoxy composites
Bisanda, E. T. N., & Ansell, M. P. (1991) · Composites Science and Technology · doi:10.1016/0266-3538(91)90026-l · Cited by 438
Mechanical properties of pineapple leaf fiber-reinforced polyester composites
Devi, L. U., Bhagawan, S. S., & Thomas, S. (1997) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19970531)64:9<1739::aid-app10>3.0.co;2-t · Cited by 426
Mohanty, A. K., Khan, M. A., & Hinrichsen, G. (2000) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/s1359-835x(99)00057-3 · Cited by 319
Self-citationOn the re-inforcement of thermoplastics by imperfectly aligned discontinuous fibres
Bowyer, W. H., & Bader, M. G. (1972) · Journal of Materials Science · doi:10.1007/bf00550698 · Cited by 311
Luo, S., & Netravali, A. N. (1999) · Journal of Materials Science · doi:10.1023/a:1004659507231 · Cited by 310
Tensile properties of short sisal fiber reinforced polystyrene composites
Nair, K. C. M., Diwan, S. M., & Thomas, S. (1996) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19960531)60:9<1483::aid-app23>3.0.co;2-1 · Cited by 310
Structure and properties of some vegetable fibres: Part 1 Sisal fibre
Mukherjee, P. S., & Satyanarayana, K. G. (1984) · Journal of Materials Science · doi:10.1007/bf00980755 · Cited by 291
Luo, S., & Netravali, A. N. (1999) · Polymer Composites · doi:10.1002/pc.10363 · Cited by 283
George, J., Bhagawan, S. S., & Thomas, S. (1998) · Composites Science and Technology · doi:10.1016/s0266-3538(97)00161-9 · Cited by 276
KALAPRASAD, G., JOSEPH, K., THOMAS, S., & PAVITHRAN, C. (1997) · Journal of Materials Science · doi:10.1023/a:1018651218515 · Cited by 264
Studies on Jute Composites—A Literature Review
Mohanty, A. K., & Misra, M. (1995) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559508009599 · Cited by 264
Self-citationMcCreight, L. R. (1968) · Materials Science and Engineering · doi:10.1016/0025-5416(68)90034-7 · Cited by 220
Thermal stability of blends of polyolefins and sisal fiber
Albano, C., González, J., Ichazo, M. N., & Kaiser, D. (1999) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(99)00064-6 · Cited by 207
Properties of sisal-CNSL composites
Bisanda, E. T. N., & Ansell, M. P. (1992) · Journal of Materials Science · doi:10.1007/bf00542934 · Cited by 207
Bismarck, A., Aranberri-Askargorta, I., Springer, J., Mohanty, A. K., Misra, M., Hinrichsen, G., & Czapla, S. (2001) · Green Chemistry · doi:10.1039/b100365h · Cited by 205
Self-citationMechanical properties of banana fibres (Musa sepientum)
Kulkarni, A. G., Satyanarayana, K. G., Rohatgi, P. K., & Vijayan, K. (1983) · Journal of Materials Science · doi:10.1007/bf00541832 · Cited by 196
Influence of fiber surface treatment on the properties of sisal‐polyester composites
Singh, B., Gupta, M., & Verma, A. (1996) · Polymer Composites · doi:10.1002/pc.10684 · Cited by 190
Mishra, S., Misra, M., Tripathy, S. S., NAYAK, S. K., & Mohanty, A. K. (2001) · Journal of Reinforced Plastics and Composites · doi:10.1106/qwr6-32vv-k720-596d · Cited by 190
Self-citationTensile properties of short sisal fiber‐reinforced polyethylene composites
Joseph, K., Thomas, S., Pavithran, C., & Brahmakumar, M. (1993) · Journal of Applied Polymer Science · doi:10.1002/app.1993.070471003 · Cited by 184
Mohanty, A. K., Drzal, L. T., & Misra, M. (2002) · Journal of Adhesion Science and Technology · doi:10.1163/156856102760146129 · Cited by 175
Self-citationKalaprasad, G., Pradeep, P., Mathew, G., Pavithran, C., & Thomas, S. (2000) · Composites Science and Technology · doi:10.1016/s0266-3538(00)00162-7 · Cited by 168
Structure and properties of some vegetable fibres: Part 2Pineapple fibre (Anannus Comosus)
Mukherjee, P. S., & Satyanarayana, K. G. (1986) · Journal of Materials Science · doi:10.1007/bf01144698 · Cited by 164
The influence of chemical surface modification on the performance of sisal‐polyester biocomposites
Misra, S., Misra, M., Tripathy, S. S., NAYAK, S. K., & Mohanty, A. K. (2002) · Polymer Composites · doi:10.1002/pc.10422 · Cited by 138
Self-citationShort pineapple‐leaf‐fiber‐reinforced low‐density polyethylene composites
George, J., Bhagawan, S. S., Prabhakaran, N., & Thomas, S. (1995) · Journal of Applied Polymer Science · doi:10.1002/app.1995.070570708 · Cited by 135
Stress relaxation in short sisal‐fiber‐reinforced natural rubber composites
Varghese, S., Kuriakose, B., & Thomas, S. (1994) · Journal of Applied Polymer Science · doi:10.1002/app.1994.070530807 · Cited by 131
Bibliography Resource structure properties of natural cellulosic fibres ? an annotated bibliography
Chand, N., Tiwary, R. K., & Rohatgi, P. K. (1988) · Journal of Materials Science · doi:10.1007/bf01174659 · Cited by 127
Effect of chemical modification on the performance of biodegradable jute yarn-Biopol® composites
Mohanty, A. K., Khan, M. A., Sahoo, S., & Hinrichsen, G. (2000) · Journal of Materials Science · doi:10.1023/a:1004723330799 · Cited by 124
Self-citationSunhemp fibre-reinforced polyester: Part 1 Analysis of tensile and impact properties
Sanadi, A. R., Prasad, S. V., & Rohatgi, P. K. (1986) · Journal of Materials Science · doi:10.1007/bf01106545 · Cited by 120
Paul, A. W., & Thomas, S. (1997) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19970110)63:2<247::aid-app12>3.0.co;2-# · Cited by 117
Mechanical properties of sisal fibre at elevated temperatures
Chand, N., & Hashmi, S. A. R. (1993) · Journal of Materials Science · doi:10.1007/bf00356422 · Cited by 112
Some structural aspects of sisal fibers
Barkakaty, B. C. (1976) · Journal of Applied Polymer Science · doi:10.1002/app.1976.070201101 · Cited by 112
Varghese, S., Kuriakose, B., Thomas, S., & Koshy, A. T. (1994) · Journal of Adhesion Science and Technology · doi:10.1163/156856194x01086 · Cited by 90
Mishra, S. K., Tripathy, S. S., Misra, M., et al. (2002) · Journal of Reinforced Plastics and Composites · doi:10.1106/073168402024282 · Cited by 86
Self-citationGao, S., & Zeng, Y. (1993) · Journal of Applied Polymer Science · doi:10.1002/app.1993.070471116 · Cited by 69
Einfluß von haftvermittlern auf das feuchteverhalten naturfaserverstärkter kunststoffe
Bledzki, A. K., & Gassan, J. (1996) · Die Angewandte Makromolekulare Chemie · doi:10.1002/apmc.1996.052360110 · Cited by 68
On the study of indigenous natural-fibre composites
Paramasivam, T., & Kalam, A. P. J. A. (1974) · Fibre Science and Technology · doi:10.1016/0015-0568(74)90020-7 · Cited by 67
Zadorecki, P., & Flodin, P. (1986) · Journal of Applied Polymer Science · doi:10.1002/app.1986.070310616 · Cited by 60
Pal, S. K., Mukhopadhyay, D., Sanyal, S., & Mukherjea, R. (1988) · Journal of Applied Polymer Science · doi:10.1002/app.1988.070350412 · Cited by 54
Mechanics of the extension of cotton fibers. II. Theoretical modeling
Hearle, J. W. S., & Sparrow, J. T. (1979) · Journal of Applied Polymer Science · doi:10.1002/app.1979.070240807 · Cited by 37
Mechanical and dielectric properties of pineapple fibres
Datta, A., Samantaray, B. K., & Bhattacherjee, S. (1984) · Journal of Materials Science Letters · doi:10.1007/bf00719918 · Cited by 22
A review of processing technology for the utilisation of agro-waste fibres
Sinha, M. K. (1982) · Agricultural Wastes · doi:10.1016/0141-4607(82)90041-5 · Cited by 20
A dielectric study of cellulose fibres
Dutta, A. K., Mukherjee, P., & Mitra, G. B. (1980) · Journal of Materials Science · doi:10.1007/bf00550607 · Cited by 19
GRAFT COPOLYMERIZATION OF VINYL MONOMERS ONTO JUTE FIBERS
Mohanty, A. K. (1987) · Journal of macromolecular science. Part C, Reviews in macromolecular chemistry and physics/Journal of macromolecular science. Reviews in macromolecular chemistry and physics · doi:10.1080/07366578708078823 · Cited by 16
Self-citationTemperature dependence of dielectric behaviour of sisal fibre
Chand, N., & Joshi, S. K. (1994) · Journal of Materials Science Letters · doi:10.1007/bf00278147 · Cited by 13
Mohanty (2000) · doi:10.1002/(sici)1439-2054(20000301)276:1
Cited by
Biodegradable composites based on lignocellulosic fibers—An overview
Satyanarayana, K. G., Arizaga, G. G. C., & Wypych, F. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.12.002 · Cited by 1,421
A review of recent research on mechanics of multifunctional composite materials and structures
Gibson, R. F. (2010) · Composite Structures · doi:10.1016/j.compstruct.2010.05.003 · Cited by 1,141
Cellulose-Based Bio- and Nanocomposites: A Review
Kalia, S., Dufresne, A., Cherian, B. M., Kaith, B. S., Avérous, L., Njuguna, J., & Nassiopoulos, E. (2011) · International Journal of Polymer Science · doi:10.1155/2011/837875 · Cited by 896
A review of natural fibers used in biocomposites: plant, animal and regenerated cellulose fibers
Ramamoorthy, S. K., Skrifvars, M., & Persson, A. (2015) · Polymer Reviews · doi:10.1080/15583724.2014.971124 · Cited by 801
Plant fibre based bio-composites: Sustainable and renewable green materials
Ramesh, M., Palanikumar, K., & Reddy, K. H. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.094 · Cited by 764
Metadata
- Authors
- Mishra, S., Mohanty, A. K., Drzal, L. T., Misra, M., & Hinrichsen, G.
- Venue
- Macromolecular Materials and Engineering
- Publisher
- Wiley
- Published
- 2004-11-02
- Volume
- 289
- Issue
- 11
- Pages
- 955-974
- ISSN
- 1438-7492 (ISSN-L)
- 1439-2054
- OpenAlex
- W1971320053
- Cited by
- 423
- References
- 60
- FWCI
- 5.02
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.