The DOI matches its Crossref record.
Shrinkage and Warpage Optimization of Expanded‐Perlite‐Filled Polypropylene Composites in Extrusion‐Based Additive Manufacturing
Abstract
A major challenge in extrusion‐based additive manufacturing is the lack of commercially available materials compared to those in well‐established processes like injection molding or extrusion. This study aims at expanding the material database by evaluating the feasibility of polypropylene, which is one of the most common and technologically relevant semicrystalline polymers. Expanded‐perlite‐filled polypropylene and ternary blends with amorphous polyolefins are evaluated to establish an understanding of their processability and their printability. A detailed study on the shrinkage behavior, as well as on the thermal, mechanical, morphological, and warpage properties is performed. It is found that smaller sized fillers result in a tremendous warpage and shrinkage reduction and concurrently improved mechanical properties than compounds filled with bigger sized fillers. Based on the optimal properties profile, a ternary blend that can overcome the shrinkage and warpage of printed parts is suggested.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
A critical review on the fused deposition modeling of thermoplastic polymer composites
Penumakala, P. K., Santo, J., & Thomas, A. (2020) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2020.108336 · Cited by 704
Chen, L.-Y., Liang, S.-X., Liu, Y., & Zhang, L.-C. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100648 · Cited by 603
Spoerk, M., Holzer, C., & Gonzalez‐Gutierrez, J. (2020) · Journal of Applied Polymer Science · doi:10.1002/app.48545 · Cited by 317
Self-citationDas, A., Gilmer, E. L., Biria, S., & Bortner, M. J. (2021) · ACS Applied Polymer Materials · doi:10.1021/acsapm.0c01228 · Cited by 305
Performance of biocompatible PEEK processed by fused deposition additive manufacturing
Arif, M. F., Kumar, S., Varadarajan, K. M., & Cantwell, W. J. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.03.015 · Cited by 296
Spoerk, M., Gonzalez-Gutierrez, J., Sapkota, J., Schuschnigg, S., & Holzer, C. (2018) · Plastics, Rubber and Composites · doi:10.1080/14658011.2017.1399531 · Cited by 282
Self-citation3D printing of high density polyethylene by fused filament fabrication
Schirmeister, C. G., Hees, T., Licht, E. H., & Mülhaupt, R. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.05.003 · Cited by 271
Fused filament fabrication of peek: A review of process-structure-property relationships
Zanjanijam, A. R., Major, I., Lyons, J. G., Lafont, U., & Devine, D. M. (2020) · Polymers · doi:10.3390/polym12081665 · Cited by 240
Metadata
- Authors
- Spoerk, M., Sapkota, J., Weingrill, G., Fischinger, T., Arbeiter, F., & Holzer, C.
- Venue
- Macromolecular Materials and Engineering
- Publisher
- Wiley
- Published
- 2017-07-04
- Volume
- 302
- Issue
- 10
- ISSN
- 1438-7492 (ISSN-L)
- 1439-2054
- OpenAlex
- W2726300979
- Cited by
- 169
- References
- 0
- FWCI
- 7.94
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.