The DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index.
Enhancement of Mechanical Properties of FDM‐PLA Parts via Thermal Annealing
Abstract
The objective of this study is to investigate the possibility of enhancing mechanical properties of poly(lactic acid) (PLA) samples processed by a rapid manufacturing (RM) technique by increasing PLA crystallinity degree via thermal annealing. The samples are manufactured by fused deposition modeling (FDM) at different temperatures and subsequently evaluated by three‐point bending flexural and tensile tests. The polymer processed at 215 °C is thermally annealed over its glass transition temperature in order to increase the degree of crystallinity to the maximum attainable level as measured by the differential scanning calorimetry and confirmed by X‐ray diffraction. The increase in the degree of crystallinity of FDM‐PLA enhances flexural stress of the samples by 11–17%. The study also demonstrates applicability of radiation sterilization for FDM‐PLA parts. Therefore, thermal annealing might be introduced into a standard RM technology of PLA, particularly for sterilizable customized implants, to efficiently improve their mechanical properties.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Scherrer after sixty years: A survey and some new results in the determination of crystallite size
Langford, J. I., & Wilson, A. J. C. (1978) · Journal of Applied Crystallography · doi:10.1107/s0021889878012844 · Cited by 3,903
Polymers for 3D Printing and Customized Additive Manufacturing
Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., & Mülhaupt, R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00074 · Cited by 3,741
Farah, S., Anderson, D. G., & Langer, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.012 · Cited by 3,443
Processing technologies for poly(lactic acid)
Lim, L.-T., Auras, R., & Rubino, M. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.05.004 · Cited by 2,766
Fischer, E. W., Sterzel, H. J., & Wegner, G. (1973) · Kolloid-Zeitschrift und Zeitschrift für Polymere · doi:10.1007/bf01498927 · Cited by 1,704
Poly(lactic acid) crystallization
Saeidlou, S., Huneault, M. A., Li, H., & Park, C. B. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.07.005 · Cited by 1,606
Chacón, J. M., Caminero, M. A., García-Plaza, E., & Núñez, P. J. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.03.065 · Cited by 1,603
Crystal structure, conformation and morphology of solution-spun poly(L-lactide) fibers
Hoogsteen, W., Postema, A. R., Pennings, A. J., Ten Brinke, G., & Zugenmaier, P. (1990) · Macromolecules · doi:10.1021/ma00204a041 · Cited by 864
Carrasco, F., Pagès, P., Gámez-Pérez, J., Santana, O. O., & Maspoch, M. L. (2010) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2009.11.045 · Cited by 738
Lanzotti, A., Grasso, M., Staiano, G., & Martorelli, M. (2015) · Rapid Prototyping Journal · doi:10.1108/rpj-09-2014-0135 · Cited by 684
El-Hadi, A., Schnabel, R., Straube, E., Müller, G., & Henning, S. (2002) · Polymer Testing · doi:10.1016/s0142-9418(01)00142-8 · Cited by 481
The thermal effects on electrospinning of polylactic acid melts
Zhou, H., Green, T. B., & Joo, Y. L. (2006) · Polymer · doi:10.1016/j.polymer.2006.08.042 · Cited by 399
Crystallization from the melt of poly(lactide)s with different optical purities and their blends
Tsuji, H., & Ikada, Y. (1996) · Macromolecular Chemistry and Physics · doi:10.1002/macp.1996.021971033 · Cited by 379
Thermal analysis of the double‐melting behavior of poly(L‐lactic acid)
Yasuniwa, M., Tsubakihara, S., Sugimoto, Y., & Nakafuku, C. (2004) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.10674 · Cited by 375
Mechanical Property Optimization of FDM PLA in Shear with Multiple Objectives
Torres, J., Cotelo, J., Karl, J., & Gordon, A. P. (2015) · JOM · doi:10.1007/s11837-015-1367-y · Cited by 374
Improving the impact strength of Poly(lactic acid) (PLA) in fused layer modeling (FLM)
Wang, L., Gramlich, W. M., & Gardner, D. J. (2017) · Polymer · doi:10.1016/j.polymer.2017.03.011 · Cited by 310
Torres, J., Cole, M., Owji, A., DeMastry, Z., & Gordon, A. P. (2016) · Rapid Prototyping Journal · doi:10.1108/rpj-07-2014-0083 · Cited by 295
Polylactide. II. Viscosity–molecular weight relationships and unperturbed chain dimensions
Schindler, A., & Harper, D. (1979) · Journal of Polymer Science: Polymer Chemistry Edition · doi:10.1002/pol.1979.170170831 · Cited by 278
A review of the developments of characteristics of PEI derivatives for gene delivery applications
Taranejoo, S., Liu, J., Verma, P., & Hourigan, K. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42096 · Cited by 246
Radhakrishnan, J., Subramanian, A., Krishnan, U. M., & Sethuraman, S. (2017) · Biomacromolecules · doi:10.1021/acs.biomac.6b01619 · Cited by 244
3D bioprinting of photocrosslinkable hydrogel constructs
Pereira, R. F., & Bártolo, P. J. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42458 · Cited by 232
Characterisation of PCL and PCL/PLA Scaffolds for Tissue Engineering
Patrício, T., Domingos, M., Gloria, A., & Bártolo, P. (2013) · Procedia CIRP · doi:10.1016/j.procir.2013.01.022 · Cited by 196
Structural Biomaterials: Third Edition
VINCENT, J. (2012) · Princeton University Press eBooks · doi:10.2307/j.ctt7tbgv · Cited by 180
Marchioli, G., van Gurp, L., van Krieken, P. P., Stamatialis, D., Engelse, M., van Blitterswijk, C. A., Karperien, M. B. J., de Koning, E., Alblas, J., Moroni, L., et al. (2015) · Biofabrication · doi:10.1088/1758-5090/7/2/025009 · Cited by 170
Degradation of poly(l-lactic acid) by γ-irradiation
Nugroho, P., Mitomo, H., Yoshii, F., & Kume, T. (2001) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(01)00030-1 · Cited by 170
Thermal degradation of poly-l-lactide—studies on kinetics, modelling and melt stabilisation
Wachsen, O., Platkowski, K., & Reichert, K.-H. (1997) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(96)00226-1 · Cited by 158
Chain Packing and Its Anomalous Effect on Mechanical Toughness for Poly(lactic acid)
Huang, T., Miura, M., Nobukawa, S., & Yamaguchi, M. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00293 · Cited by 85
Srinivas, V., van Hooy‐Corstjens, C. S. J., & Harings, J. (2018) · Polymer · doi:10.1016/j.polymer.2018.03.063 · Cited by 85
Influence of different sterilization processes on the properties of commercial poly(lactic acid)
Savaris, M., dos Santos, V., & Brandalise, R. N. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.07.031 · Cited by 83
New biomaterials for orthopedic implants
Ong, K. L., Yun, M., & White, J. B. R. (2015) · Orthopedic Research and Reviews · doi:10.2147/orr.s63437 · Cited by 68
Polymer crystallization rate challenges: The art of chemistry and processing
Andjelić, S., & Scogna, R. C. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42066 · Cited by 58
Effect of cooling conditions on the mechanical properties of crystalline poly(lactic acid)
Huang, T., & Yamaguchi, M. (2017) · Journal of Applied Polymer Science · doi:10.1002/app.44960 · Cited by 30
Influence of electron beam irradiation on physicochemical properties of poly(trimethylene carbonate)
Jozwiakowska, J., Wach, R. A., Rokita, B., Ulański, P., Nalawade, S. P., Grijpma, D. W., Feijén, J., & Rosiak, J. M. (2011) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2011.05.010 · Cited by 15
Self-citationPerego (1998) · doi:10.1002/(sici)1097-4628(19960103)59:1<37::aid-app6>3.0.co;2-n
Cited by
Wickramasinghe, S., Do, T., & Tran, P. (2020) · Polymers · doi:10.3390/polym12071529 · Cited by 1,052
Fused deposition modeling: process, materials, parameters, properties, and applications
Rajan, K., Samykano, M., Kadirgama, K., Harun, W. S. W., & Rahman, M. M. (2022) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-022-08860-7 · Cited by 426
Fused filament fabrication of polymer materials: A review of interlayer bond
Gao, X., Qi, S., Kuang, X., Su, Y., Li, J., & Wang, D. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2020.101658 · Cited by 418
Bhandari, S., Lopez-Anido, R. A., & Gardner, D. J. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.100922 · Cited by 355
Shanmugam, V., Rajendran, D. J. J., Babu, K., Rajendran, S., Veerasimman, A., Marimuthu, U., Singh, S., Das, O., Neisiany, R. E., Hedenqvist, M. S., et al. (2021) · Polymer Testing · doi:10.1016/j.polymertesting.2020.106925 · Cited by 268
Metadata
- Authors
- Wach, R. A., Wolszczak, P., & Adamus‐Wlodarczyk, A.
- Venue
- Macromolecular Materials and Engineering
- Publisher
- Wiley
- Published
- 2018-07-11
- Volume
- 303
- Issue
- 9
- ISSN
- 1438-7492 (ISSN-L)
- 1439-2054
- OpenAlex
- W2813838763
- Cited by
- 255
- References
- 34
- FWCI
- 7.88
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.