3D Printable Conducting and Biocompatible PEDOT‐graft‐PLA Copolymers by Direct Ink Writing
Open accessThe DOI matches its Crossref record; 24 of the 24 references it cites were found in a registry or an index.
Abstract
Tailor‐made polymers are needed to fully exploit the possibilities of additive manufacturing, constructing complex, and functional devices in areas such as bioelectronics. In this paper, the synthesis of a conducting and biocompatible graft copolymer which can be 3D printed using direct melting extrusion methods is shown. For this purpose, graft copolymers composed by conducting polymer poly(3,4‐ethylenedioxythiophene) (PEDOT) and a biocompatible polymer polylactide (PLA) are designed. The PEDOT‐g‐PLA copolymers are synthesized by chemical oxidative polymerization between 3,4‐ethylenedioxythiophene and PLA macromonomers. PEDOT‐g‐PLA copolymers with different compositions are obtained and fully characterized. The rheological characterization indicates that copolymers containing below 20 wt% of PEDOT show the right complex viscosity values suitable for direct ink writing (DIW). The 3D printing tests using the DIW methodology allows printing different parts with different shapes with high resolution (200 µm). The conductive and biocompatible printed patterns of PEDOT‐g‐PLA show excellent cell growth and maturation of neonatal cardiac myocytes cocultured with fibroblasts.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“Tissue-like structures made of cardiomyocytes with fibroblast were developed in PEDOT-g-PLA and cardiomyocyte, improving the approved suitable maturation and functionality of these cells.”
From Green Copolymers Based on Poly(Lactic Acid)—Short Review (2021) · cites this paper as [108]
The cited source says what the claim attributes to it.
In the citing paper
“The promising results of the presented study could assist the progress of generating artificial tissue [108].”
From Green Copolymers Based on Poly(Lactic Acid)—Short Review (2021) · cites this paper as [108]
The cited source says what the claim attributes to it.
In the citing paper
“5:95 wt % PEDOT-g-PLA showed the best performance during the printing process as it improved the ability to control its shape.”
From Green Copolymers Based on Poly(Lactic Acid)—Short Review (2021) · cites this paper as [108]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D printing of conducting polymers
Yuk, H., Lu, B., Lin, S., Qu, K., Xu, J., Luo, J., & Zhao, X. (2020) · Nature Communications · doi:10.1038/s41467-020-15316-7 · Cited by 1,001
Challenges in Cardiac Tissue Engineering
Vunjak-Novakovic, G., Tandon, N., Godier, A., Maidhof, R., Marsano, A., Martens, T. P., & Radisic, M. (2010) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2009.0352 · Cited by 511
Conductive biomaterials for muscle tissue engineering
Dong, R., Ma, P. X., & Guo, B. (2020) · Biomaterials · doi:10.1016/j.biomaterials.2019.119584 · Cited by 381
Polarons, Bipolarons, And Absorption Spectroscopy of PEDOT
Zozoulenko, I., Singh, A., Singh, S. K., Gueskine, V., Crispin, X., & Berggren, M. (2019) · ACS Applied Polymer Materials · doi:10.1021/acsapm.8b00061 · Cited by 373
Heo, D. N., Lee, S.-J., Timsina, R., Qiu, X., Castro, N. J., & Zhang, L. G. (2019) · Materials Science and Engineering: C · doi:10.1016/j.msec.2019.02.008 · Cited by 271
Sustainable Materials and Chemical Processes for Additive Manufacturing
Sanchez-Rexach, E., Johnston, T. G., Jehanno, C., Sardon, H., & Nelson, A. (2020) · Chemistry of Materials · doi:10.1021/acs.chemmater.0c02008 · Cited by 196
Rheology as a tool for evaluation of melt processability of innovative dosage forms
Aho, J., Boetker, J. P., Baldursdottir, S., & Rantanen, J. (2015) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2015.02.009 · Cited by 191
Controlling Epileptiform Activity with Organic Electronic Ion Pumps
Williamson, A., Rivnay, J., Kergoat, L., Jonsson, A., Inal, S., Uguz, I., Ferro, M., Ivanov, A., Sjöström, T. A., Simon, D. T., et al. (2015) · Advanced Materials · doi:10.1002/adma.201500482 · Cited by 162
Narupai, B., & Nelson, A. (2020) · ACS Macro Letters · doi:10.1021/acsmacrolett.0c00200 · Cited by 121
3D Printing Polymers with Supramolecular Functionality for Biological Applications
Pekkanen, A. M., Mondschein, R. J., Williams, C. B., & Long, T. E. (2017) · Biomacromolecules · doi:10.1021/acs.biomac.7b00671 · Cited by 118
Ionic Liquid Gel‐Assisted Electrodes for Long‐Term Cutaneous Recordings
Leleux, P., Johnson, C., Strakosas, X., Rivnay, J., Hervé, T., Owens, R. M., & Malliaras, G. G. (2014) · Advanced Healthcare Materials · doi:10.1002/adhm.201300614 · Cited by 111
Diacci, C., Lee, J. W., Janson, P., Dufil, G., Méhes, G., Magnus Berggren, A., Simon, D. T., & Stavrinidou, E. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201900262 · Cited by 106
Chang, H. C., Sun, T., Sultana, N., Lim, M. M., Khan, T. H., & Ismail, A. F. (2015) · Materials Science and Engineering C · doi:10.1016/j.msec.2015.12.074 · Cited by 92
Mantione, D., del Agua, I., Schaafsma, W., Diez‐Garcia, J., Castro, B., Sardon, H., & Mecerreyes, D. (2016) · Macromolecular Bioscience · doi:10.1002/mabi.201600059 · Cited by 92
Self-citation3D Printing/Interfacial Polymerization Coupling for the Fabrication of Conductive Hydrogel
Fantino, E., Roppolo, I., Zhang, D., Xiao, J., Chiappone, A., Castellino, M., Guo, Q., Pirri, C. F., & Yang, J. (2018) · Macromolecular Materials and Engineering · doi:10.1002/mame.201700356 · Cited by 68
Mecerreyes, D., Stevens, R., Nguyen, C., et al. (2002) · Synthetic Metals · doi:10.1016/s0379-6779(01)00503-3 · Cited by 65
Self-citationAll-Polymer Conducting Fibers and 3D Prints via Melt Processing and Templated Polymerization
Hofmann, A., Östergren, I., Kim, Y.-S., Fauth, S. S., Craighero, M., Yoon, M., Lund, A., & Müller, C. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b20615 · Cited by 60
Minudri, D., Mantione, D., Dominguez‐Alfaro, A., et al. (2020) · Advanced Electronic Materials · doi:10.1002/aelm.202000510 · Cited by 43
Self-citationSilva, A. C. D., Semeano, A. T. S., Dourado, A. H. B., Ulrich, H., & de Torresi, S. I. C. (2018) · ACS Omega · doi:10.1021/acsomega.8b00510 · Cited by 39
Silva, A. C. D., Augusto, T., Andrade, L. H., & de Torresi, S. I. C. (2017) · Materials Science and Engineering C · doi:10.1016/j.msec.2017.09.007 · Cited by 37
Mumtaz, M., Ibarboure, E., Labrugère, C., et al. (2008) · Macromolecules · doi:10.1021/ma801856h · Cited by 27
New electroactive macromonomers and multi-responsive PEDOT graft copolymers
Marina, S., Mantione, D., Manojkumar, K., Vijayakrishna, K., Gutierrez, J., Tercjak, A., Sanchez‐Sanchez, A., & Mecerreyes, D. (2018) · Polymer Chemistry · doi:10.1039/c8py00680f · Cited by 22
Self-citationSilva, A. C. D., Higgins, M. J., & de Torresi, S. I. C. (2019) · Materials Science and Engineering C · doi:10.1016/j.msec.2019.01.103 · Cited by 17
Chiu, W., Kuo, H.-Y., Tsai, P., & Wu, J. (2012) · Journal of Polymers and the Environment · doi:10.1007/s10924-012-0514-6 · Cited by 14
Research works printed but not linked: 1
- Gkartzou E., 2017, Manuf. Rev., 4, 12
Cited by
Direct Ink Writing: A 3D Printing Technology for Diverse Materials
Saadi, M. A. S. R., Maguire, A., Pottackal, N. T., Thakur, M. S. H., Ikram, M. M., Hart, A. J., Ajayan, P. M., & Rahman, M. M. (2022) · Advanced Materials · doi:10.1002/adma.202108855 · Cited by 1,335
Arif, Z. U., Khalid, M. Y., Noroozi, R., Sadeghianmaryan, A., Jalalvand, M., & Hossain, M. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.07.140 · Cited by 395
Green Copolymers Based on Poly(Lactic Acid)—Short Review
Stefaniak, K., & Masek, A. (2021) · Materials · doi:10.3390/ma14185254 · Cited by 109
Niederhoffer, T., Vanhoestenberghe, A., & Lancashire, H. T. (2023) · Journal of Neural Engineering · doi:10.1088/1741-2552/acb084 · Cited by 38
Metadata
- Authors
- Dominguez‐Alfaro, A., Gabirondo, E., Alegret, N., De León‐Almazán, C. M., Hernandez, R., Vallejo‐Illarramendi, A., Prato, M., & Mecerreyes, D.
- Affiliations
- University of the Basque Country (ES)
- POLYMAT University of the Basque Country UPV/EHU Avenida de Tolosa 72 Donostia‐San Sebastián 20018 Spain
- Ikerbasque (ES)
- Corresponding author
- Mecerreyes, David
- ORCID
- Venue
- Macromolecular Rapid Communications
- Publisher
- Wiley
- Published
- 2021-05-03
- Volume
- 42
- Issue
- 12
- Pages
- e2100100-e2100100
- ISSN
- 1022-1336 (ISSN-L)
- 1521-3927
- OpenAlex
- W3157559312
- Semantic Scholar
- 41f897b650150faafaa295c0b004eba730aeb7f4
- Cited by
- 44
- References
- 24
- Citations by year
- 2026: 1 · 2025: 5 · 2024: 9 · 2023: 8 · 2022: 13 · 2021: 8
- FWCI
- 3.37
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- Locations
- Macromolecular Rapid Communications (publishedVersion, cc-by)
- PubMed (publishedVersion)
- ArTS Archivio della ricerca di Trieste (University of Trieste https://www.units.it/) (submittedVersion, cc-by)
- Communities in ADDI (University of the Basque Country) (submittedVersion, cc-by)
- Hispana (submittedVersion, cc-by)
- Funders
- H2020 Marie Skłodowska-Curie Actions (823989)
- Topics
- Physical Sciences › Materials Science › Polymers and Plastics › Conducting polymers and applications
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Additive Manufacturing and 3D Printing Technologies
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Keywords
- PEDOT, polylactic acid, direct ink writing, 3D printing, conducting polymers, biocompatible polymers, chemical oxidative polymerization, rheology, cardiomyocytes, bioelectronics, cell growth
- MeSH terms
- Humans, Infant, Newborn, Ink, Polyesters, Polymers, Writing, Bridged Bicyclo Compounds, Heterocyclic
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.