The DOI matches its Crossref record; 124 of the 124 references it cites were found in a registry or an index.
Plasticity of Semicrystalline Polymers
Abstract
Semi‐crystalline polymers can be deformed up to a very high strain. The deformation process involves frequently a complete molecular rearrangement of the chain‐folded lamellar morphology into a more or less chain‐unfolded fibrillar microstructure. This transformation is likely to occur through an intermediate state of high molecular disorder at a local scale. It led to the formulation of a concept of strain‐induced melting‐recrystallization process as a main mechanism of the structure transformation. In contrast, several structural features occurring at moderate plastic strains are relevant to strictly crystallographic processes. The plastic deformation process of semicrystalline polymers and the micromechanisms involved are discussed. A critical discussion of experimental findings is made to point out the strength or the deficiency of the various argumentations. It is demonstrated that the crystallographic slip mechanisms, including slips: transverse and along the chains are the basic deformation mechanisms in the deformation sequence, active at all strain levels. Direct microscopic evidence of chain slip activity even at well advanced stages of the deformation process is presented. In contrary, the melting‐recrystallization seems to be restricted to the high‐strain stage accompanied by chain unfolding and perhaps limited to only a small fraction of the crystalline phase. In addition the experimental results demonstrates clearly that the cavitation, necessary in the Peterlin's model, is really unessential in producing high deformation and appearance of the final highly oriented structure. This can be effectively accomplished with only crystallographic mechanisms employed. A very important role in the deformation sequence is played by the partially reversible shear deformation of amorphous interlamellar layers, producing not only high orientation of amorphous component but also influencing deeply the deformation of crystalline phase, since both phases are strongly connected and must deform simultaneously and consistently.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“For the amorphous phase, it was found that the shear of amorphous interlamellar layers was the principal deformation mechanism.”
From Erosion of the molecular network in the amorphous layers of polyethylene upon high-strain deformation (2016) · cites this paper as [2]
Citations
Cites
Encyclopedia of polymer science and engineering
Bawn, C. S. H. (1987) · Polymer · doi:10.1016/0032-3861(87)90274-6 · Cited by 4,203
Peierls, R. (1940) · Proceedings of the Physical Society · doi:10.1088/0959-5309/52/1/305 · Cited by 1,491
KELLER, A. (1962) · Polymer · doi:10.1016/0032-3861(62)90094-0 · Cited by 1,320
Dislocations in a simple cubic lattice
Nabarro, F. R. N. (1947) · Proceedings of the Physical Society · doi:10.1088/0959-5309/59/2/309 · Cited by 1,233
Molecular model of drawing polyethylene and polypropylene
Peterlin, A. (1971) · Journal of Materials Science · doi:10.1007/bf00550305 · Cited by 987
The use of a mathematical model to describe isothermal stress-strain curves in glassy thermoplastics
Haward, R. N., & Thackray, G. (1968) · Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences · doi:10.1098/rspa.1968.0029 · Cited by 646
Strength and toughness of crystalline polymer systems
Galeski, A. (2003) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2003.09.003 · Cited by 614
Structure and plastic deformation of polyethylene
Lin, L., & Argon, A. S. (1994) · Journal of Materials Science · doi:10.1007/bf01162485 · Cited by 574
Deformation mechanisms in crystalline polymers
Bowden, P. B., & Young, R. J. (1974) · Journal of Materials Science · doi:10.1007/bf00540553 · Cited by 551
Hiss, R., Hobeika, S., Lynn, C., & Strobl, G. (1999) · Macromolecules · doi:10.1021/ma981776b · Cited by 540
Research works printed but not linked: 17
- Oleinik E. F., 2003, Polymer Science C, 45, 17
- Haudin J.‐M., 1982, Plastic Deformation of Amorphous and Semicrystalline Materials, 291
- Galeski A., 2009, Nano‐ and Micromechanics of Polymer Blends and Composites, 3, 10.1007/978-3-446-43012-9_1 · doi:10.1007/978-3-446-43012-9_1
- Lotz B., 1993, Material Science and Technology A Comprehensive Treatment, 79
- Barham P. J., 1993, Material Science and Technology A Comprehensive Treatment, 153
- Crist B., 1993, Material Science and Technology A Comprehensive Treatment, 427
- Seguela R., 2007, e‐Polymers, 032, 1
- Young R. J., 1976, Philos Mag, 30, 86
- Schmid E., 1950, Plasticity of Crystals
- G'Sell C., 1993, Introduction: a la mechanique des polymeres
- Porter R. S., 1971, Polymer Preprints, 12, 39
- Wunderlich B., 1973, Macromolecular Physics, Crystal Structure, Morphology, Defects
- Young R. J., 1988, Material Forum, 11, 210
- Crist B., 1989, Polymer Communications, 30, 69
- 10.1002/(SICI)1099-0488(19980915)36:12<2177::AID-POLB15>3.0.CO;2-X · doi:10.1002/(sici)1099-0488(19980915)36:12<2177::aid-polb15>3.0.co;2-x
- 10.1002/polb.10118 · DOI
- Park J. B., 1973, Journal of Applied Physics, 42, 3800
Cited by
Xu, S., Zhou, J., & Pan, P. (2023) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2023.101676 · Cited by 166
Plastic Deformation Mechanisms of Semicrystalline and Amorphous Polymers
Jabbari-Farouji, S., Rottler, J., Lame, O., Makke, A., Perez, M., & Barrat, J.-L. (2015) · ACS Macro Letters · doi:10.1021/mz500754b · Cited by 147
Kassab, A., Al Nabhani, D., Mohanty, P., Pannier, C., & Ayoub, G. Y. (2023) · Polymers · doi:10.3390/polym15193881 · Cited by 141
“Both these crystalline block segments and the interlinking amorphous regions adjust their orientation to align with the direction of maximum stretch, known as the principal stretch direction [219].”
BackgroundKim, J. M., Locker, R., & Rutledge, G. C. (2014) · Macromolecules · doi:10.1021/ma402297a · Cited by 125
Mechanical Properties of Polymer Blends
Bartczak, Z., & Gałęski, A. (2014) · Springer eBooks · doi:10.1007/978-94-007-6064-6_13 · Cited by 89
Self-citationStructural mechanics of semicrystalline polymers prior to the yield point: a review
Патлажан, С. А., & Rémond, Y. (2012) · Journal of Materials Science · doi:10.1007/s10853-012-6620-y · Cited by 96
Sato, K., Tominaga, Y., Imai, Y., Yoshiyama, T., & Aburatani, Y. (2022) · Polymer Testing · doi:10.1016/j.polymertesting.2022.107690 · Cited by 84
Quantification of strain-induced damage in semi-crystalline polymers: a review
Zhang, Y., Jar, P. ‐. B., Xue, S., & Li, L. (2018) · Journal of Materials Science · doi:10.1007/s10853-018-2859-2 · Cited by 82
A comprehensive review on polymer single crystals—From fundamental concepts to applications
Agbolaghi, S., Abbaspoor, S., & Abbasi, F. (2017) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2017.11.006 · Cited by 75
Hao, P., Laheri, V., Dai, Z., & Gilabert, F. A. (2022) · International Journal of Plasticity · doi:10.1016/j.ijplas.2022.103233 · Cited by 74
Lee, A. H., Szczesny, S. E., Santare, M. H., & Elliott, D. M. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.04.011 · Cited by 58
“Examples of microstructural changes include microcracks in metals [10–13], interlamellar debonding in polymers [14,15], matrix microcracking in composites [16,17], and voids in ceramics [18]; all of these irreversible rearrangements in microstructure produce impaired macroscopic mechanical properties such as lowered m…”
Dislocations in molecular crystals
Olson, I. A., Shtukenberg, A. G., Kahr, B. E., & Ward, M. D. (2018) · Reports on Progress in Physics · doi:10.1088/1361-6633/aac303 · Cited by 58
Morphology and Plastic Yielding of Ultrahigh Molecular Weight Polyethylene
Gałęski, A., Bartczak, Z., Vozniak, A., Pawlak, A., & Walkenhorst, R. (2020) · Macromolecules · doi:10.1021/acs.macromol.9b02154 · Cited by 58
Self-citationA constitutive description of the rate-sensitive response of semi-crystalline polymers
Pouriayevali, H., Arabnejad, S., Guo, Y., & Shim, V. P. W. (2013) · International Journal of Impact Engineering · doi:10.1016/j.ijimpeng.2013.05.002 · Cited by 61
Micromechanics of semicrystalline polymers: Yield kinetics and long‐term failure
Sedighiamiri, A., Govaert, L. E., Kanters, M. J. W., & van Dommelen, J. A. W. (2012) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.23136 · Cited by 65
Laser Transmission Welding of Semi-Crystalline Polymers and Their Composites: A Critical Review
Dave, F., Ali, M. M., Sherlock, R. J., Kandasami, A., & Tormey, D. (2021) · Polymers · doi:10.3390/polym13050675 · Cited by 60
The structural evolution of high-density polyethylene during crazing in liquid medium
Yarysheva, A. Y., Rukhlya, E. G., Yarysheva, L. M., Bagrov, D. V., Volynskii, A. L., & Bakeev, N. F. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2015.03.003 · Cited by 52
Olsson, P. A. T., in ’t Veld, P. J., Andreasson, E., Bergvall, E., Persson Jutemar, E., Petersson, V., Rutledge, G. C., & Kroon, M. (2018) · Polymer · doi:10.1016/j.polymer.2018.07.075 · Cited by 52
Micromechanical modeling of the deformation kinetics of semicrystalline polymers
Sedighiamiri, A., Govaert, L. E., & van Dommelen, J. A. W. (2011) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.22297 · Cited by 54
Lélias, G., Paroissien, É., Lachaud, F., & Morlier, J. (2018) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2018.09.005 · Cited by 48
Habumugisha, J. C., Feng, S., Iqbal, O., Lin, Y., An, M., Meng, L., Wang, D., Chen, W., & Li, L. (2020) · Polymer · doi:10.1016/j.polymer.2020.123234 · Cited by 48
Deformation of Confined Poly(ethylene oxide) in Multilayer Films
Lai, C.-Y., Hiltner, A., Baer, E., & Korley, L. T. J. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am300240r · Cited by 46
Amjadi, M., & Fatemi, A. (2020) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2020.105571 · Cited by 45
Stress–strain behavior of cold-drawn isotactic polypropylene subjected to various drawn histories
Nitta, K., & Nomura, H. (2014) · Polymer · doi:10.1016/j.polymer.2014.10.028 · Cited by 44
Su, C., Chen, H., Ju, S., Chen, H., Shih, C.-W., Pan, C.-T., & You, T.-D. (2020) · Scientific Reports · doi:10.1038/s41598-020-64566-4 · Cited by 42
Cyclic viscoplasticity of semicrystalline polymers with finite deformations
Drozdov, A. D., Klitkou, R., & Christiansen, J. D. C. (2012) · Mechanics of Materials · doi:10.1016/j.mechmat.2012.09.005 · Cited by 44
Rosa, C. D., Scoti, M., de Ballesteros, O. R., Girolamo, R. D., Auriemma, F., & Malafronte, A. (2020) · Macromolecules · doi:10.1021/acs.macromol.0c00842 · Cited by 41
WAXS/SAXS study of plastic deformation instabilities and lamellae fragmentation in polyethylene
Bartczak, Z., & Vozniak, A. (2019) · Polymer · doi:10.1016/j.polymer.2019.05.076 · Cited by 38
Self-citationMakarewicz, C., Safandowska, M., Idczak, R., & Różański, A. (2021) · Macromolecules · doi:10.1021/acs.macromol.1c01258 · Cited by 37
Yarysheva, A. Y., Bagrov, D. V., Bakirov, A. V., Yarysheva, L. M., Чвалун, С. Н., & Volynskii, A. L. (2018) · European Polymer Journal · doi:10.1016/j.eurpolymj.2018.01.040 · Cited by 36
Mullins effect in polyethylene and its dependency on crystal content: A network alteration model
Makki, M., Ayoub, G. Y., Abdul-Hameed, H., Zaïri, F., Mansoor, B., Naït‐Abdelaziz, M., & Ouederni, M. (2017) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2017.04.022 · Cited by 38
Bartczak, Z. (2018) · Polymer Testing · doi:10.1016/j.polymertesting.2018.04.027 · Cited by 34
Self-citationThe effect of microstructure on the slow crack growth resistance in polyethylene resins
Adib, A., Domínguez, C., Rodríguez, J., Martín, C., & García, R. A. (2014) · Polymer Engineering and Science · doi:10.1002/pen.23970 · Cited by 35
Montanari, G. C., Seri, P., & Dissado, L. A. (2019) · IEEE Transactions on Dielectrics and Electrical Insulation · doi:10.1109/tdei.2018.007829 · Cited by 33
“Furthermore, the most recent theories would exclude that craze formation in semicrystalline polymers (or amorphous polymers above T ) involves cavitation [17].”
BackgroundSharaf, M. A., & Kloczkowski, A. (2023) · Macromolecular Chemistry and Physics · doi:10.1002/macp.202300203 · Cited by 33
Correlation of structure and mechanical response in solid-like polymers
Jabbari‐Farouji, S., Rottler, J., Lame, O., Makke, A., Perez, M., & Barrat, J. (2015) · Journal of Physics Condensed Matter · doi:10.1088/0953-8984/27/19/194131 · Cited by 36
Effect of nanosilica on the morphology of polyethylene investigated by AFM
Panaitescu, D. M., Frone, A. N., & Spataru, C. I. (2012) · Composites Science and Technology · doi:10.1016/j.compscitech.2012.10.001 · Cited by 31
Molecular View of Properties of Random Copolymers of Isotactic Polypropylene
Auriemma, F., Rosa, C. D., Girolamo, R. D., Malafronte, A., Scoti, M., & Cioce, C. (2016) · Advances in polymer science · doi:10.1007/12_2016_350 · Cited by 32
Deformation Instabilities and Lamellae Fragmentation during Deformation of Cross-linked Polyethylene
Bartczak, Z., & Vozniak, A. (2019) · Polymers · doi:10.3390/polym11121954 · Cited by 33
“The joint activity of all these mechanisms allows for a full accommodation of the strain [4].”
BackgroundSelf-citationModeling of spherulite microstructures in semicrystalline polymers
Oktay, H. E., & Gürses, E. (2015) · Mechanics of Materials · doi:10.1016/j.mechmat.2015.04.010 · Cited by 35
“The crystalline lamellae are 3 to 20 nm thick, whereas spherulite diameters are normally in the range of 2 to 20 microns [2].”
BackgroundYield behavior of random copolymers of isotactic polypropylene
Auriemma, F., Rosa, C. D., Girolamo, R. D., Malafronte, A., Scoti, M., & Cipullo, R. (2017) · Polymer · doi:10.1016/j.polymer.2017.09.058 · Cited by 30
Keratin filament mechanics and energy dissipation are determined by metal-like plasticity
Lorenz, C., Forsting, J., Style, R. W., Klumpp, S., & Köster, S. (2023) · Matter · doi:10.1016/j.matt.2023.04.014 · Cited by 29
Acoustic emission from the initiation of plastic deformation of Polyethylenes during tensile tests
Casiez, N., Deschanel, S., Monnier, T., & Lame, O. (2014) · Polymer · doi:10.1016/j.polymer.2014.09.044 · Cited by 28
Manaia, J. P., Pires, F. M. A., Jesus, A. M. P. D., & Wu, S. (2019) · Polymer Testing · doi:10.1016/j.polymertesting.2019.106156 · Cited by 27
Sadeghpour, E., Wang, H., Guo, Y., Chua, D. H. C., & Shim, V. P. W. (2019) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2019.105729 · Cited by 25
Chen, Y., Cheng, Y., & Rwei, S. (2022) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.2c04183 · Cited by 28
Xie, J., Xu, R., & Lei, C. (2018) · Polymer · doi:10.1016/j.polymer.2018.10.047 · Cited by 27
Deplancke, T., Fivel, M., & Lame, O. (2019) · Mechanics of Materials · doi:10.1016/j.mechmat.2019.103129 · Cited by 26
Strain‐induced morphology evolution and charge transport in conjugated polymer films
Ding, Z., Zhao, K., & Han, Y. (2024) · Interdisciplinary materials · doi:10.1002/idm2.12223 · Cited by 24
Olsson, P. A. T., Schröder, E., Hyldgaard, P., Kroon, M., Andreasson, E., & Bergvall, E. (2017) · Polymer · doi:10.1016/j.polymer.2017.06.008 · Cited by 24
“along the caxis of the orthorhombic cell [3].”
BackgroundResultInfluentialSbrescia, S., Ju, J., Engels, T. A. P., van Ruymbeke, E., & Seitz, M. E. (2021) · Journal of Polymer Science · doi:10.1002/pol.20200791 · Cited by 25
Plastic Deformation of Polypropylene Studied by Positron Annihilation Lifetime Spectroscopy
Makarewicz, C., Safandowska, M., Idczak, R., & Różański, A. (2022) · Macromolecules · doi:10.1021/acs.macromol.2c01430 · Cited by 24
Takahashi, Y., Shishido, T., Yamamoto, K., Masaoka, T., Kubo, K., Tateiwa, T., & Pezzotti, G. (2014) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2014.11.002 · Cited by 25
Bartczak, Z., Grala, M., Richaud, E., & Gadzinowska, K. (2016) · Polymer · doi:10.1016/j.polymer.2016.07.068 · Cited by 23
“It plays a very important role in the deformation sequence, not only allowing for a high orientation of amorphous component, but also influencing deeply the deformation of crystalline phase, since both phases are intimately connected through many chains crossing the crystalline/amorphous interface, therefore both comp…”
Self-citationBernard, C. A., Lame, O., Deplancke, T., Cavaillé, J. Y., & Ogawa, K. (2020) · Mechanics of Materials · doi:10.1016/j.mechmat.2020.103640 · Cited by 22
Yan, Z., Guo, Q., Zaïri, F., Zaoui, A., Jiang, Q., & Liu, X. (2021) · Mechanics of Materials · doi:10.1016/j.mechmat.2021.104060 · Cited by 21
Montanari, G. C. (2018) · IEEE International Conference on Dielectrics (ICD) · doi:10.1109/icd.2018.8468469 · Cited by 20
Plastic deformation mechanism of crystalline polymer materials during the rolling process
Qiu, J., Murata, T., Wu, X., Kudo, M., & Sakai, E. (2012) · Journal of Materials Science · doi:10.1007/s10853-012-6957-2 · Cited by 19
Deformation Instabilities and Cavitation in Plastic Deformation of Semicrystalline Polyethylene
Bartczak, Z., & Vozniak, A. (2024) · Macromolecules · doi:10.1021/acs.macromol.4c00642 · Cited by 17
Self-citationA micromechanical study on the deformation kinetics of oriented semicrystalline polymers
Sedighiamiri, A., Senden, D. J. A., Tranchida, D., Govaert, L. E., & van Dommelen, J. A. W. (2013) · Computational Materials Science · doi:10.1016/j.commatsci.2013.09.068 · Cited by 23
Olsson, P. A. T., Hyldgaard, P., Schröder, E., Jutemar, E. P., Andreasson, E., & Kroon, M. (2018) · Physical Review Materials · doi:10.1103/physrevmaterials.2.075602 · Cited by 20
Microstructural behavior and failure mechanisms of organic semicrystalline thin film blends
Zhao, B., Awartani, O., O’Connor, B. T., & Zikry, M. A. (2016) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.23991 · Cited by 17
Strain alignment of conjugated polymers: Method, microstructure, and applications
Schrickx, H. M., Sen, P., Balar, N., & O’Connor, B. T. (2024) · Cell Reports Physical Science · doi:10.1016/j.xcrp.2024.102076 · Cited by 17
Tulpan, I., Halevi, S., Shirizly, A., & Levy, G. K. (2025) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2025.108948 · Cited by 17
Cha, S., Kim, J. G., & Peterson, G. I. (2024) · Macromolecules · doi:10.1021/acs.macromol.4c02156 · Cited by 17
Diesel-induced transparency of plastically deformed high-density polyethylene
Erdmann, M., Kupsch, A., Müller, B. R., Hentschel, M., Niebergall, U., Böhning, M., & Bruno, G. (2019) · Journal of Materials Science · doi:10.1007/s10853-019-03700-8 · Cited by 16
Mesbah, A., Elmeguenni, M., Yan, Z., Zaïri, F., Ding, N., & Gloaguen, J. M. (2021) · Polymer Testing · doi:10.1016/j.polymertesting.2021.107248 · Cited by 16
Strengthening of mille-feuille structured high-density polyethylene by heat elongation
Murayama, T., Abe, E., & Saito, H. (2021) · Polymer · doi:10.1016/j.polymer.2021.124343 · Cited by 16
In-situ FTIR imaging on the plastic deformation of iPP thin films
Li, J., Li, H., Meng, L., Li, X., Chen, L., Chen, W., Zhou, W., Qi, Z., & Li, L. (2014) · Polymer · doi:10.1016/j.polymer.2014.01.033 · Cited by 16
Plastic deformation and cavitation in semicrystalline polymers studied by X-ray methods
Pawlak, A. (2014) · Polimery · doi:10.14314/polimery.2014.533 · Cited by 16
Jar, P. ‐. B. (2013) · Polymer Engineering and Science · doi:10.1002/pen.23735 · Cited by 16
Systematic coarse‐graining of semicrystalline polyethylene
Li, Y., Agrawal, V., & Oswald, J. (2019) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.24789 · Cited by 19
The effect of preliminary orientation on environmental crazing of high-density polyethylene films
Аржакова, О. В., Prishchepa, D. V., Dolgova, A. A., & Volynskii, A. L. (2019) · Polymer · doi:10.1016/j.polymer.2019.03.019 · Cited by 16
The effects of structural disorders and microstructural mechanisms on semi-crystalline P3HT behavior
Zhao, B., & Zikry, M. A. (2014) · Polymer · doi:10.1016/j.polymer.2014.12.003 · Cited by 16
Hund, J., Granum, H., Olufsen, S. N., Holmstrøm, P. H., Johnsen, J., & Clausen, A. H. (2022) · Polymer Testing · doi:10.1016/j.polymertesting.2022.107717 · Cited by 15
Crystallization and mechanical behavior of semi-crystalline polyethylene
Yan, Z., Zaoui, A., & Zaïri, F. (2021) · Physica Scripta · doi:10.1088/1402-4896/ac3a4f · Cited by 16
Yan, Z., Guo, Q., Zaïri, F., & Zaoui, A. (2022) · International Journal of Non-Linear Mechanics · doi:10.1016/j.ijnonlinmec.2022.104238 · Cited by 16
von Baeckmann, C., Wilhelm, H., Spieckermann, F., Strobel, S., Polt, G., Sowiński, P., Piórkowska, E., Bismarck, A., & Zehetbauer, M. (2019) · Thermochimica Acta · doi:10.1016/j.tca.2019.03.007 · Cited by 14
Bartczak, Z., & Vozniak, A. (2020) · Polymers · doi:10.3390/polym12102208 · Cited by 13
“As already established, these basic mechanisms are occasionally supported by other specific mechanisms, such as twinning or martensitic transformation, when possible [1,2,4].”
BackgroundInfluentialSelf-citationDeformation of Poly-l-lactid acid (PLLA) under Uniaxial Tension and Plane-Strain Compression
Vozniak, A., & Bartczak, Z. (2021) · Polymers · doi:10.3390/polym13244432 · Cited by 11
“, the shear taking place in amorphous layers between lamellae [57,60], which proved to be the dominant mechanism Figure 16.”
BackgroundSelf-citationPlastic Deformation of High Density Polyethylene with Extended-Chain Crystal Morphology
Vozniak, A., & Bartczak, Z. (2022) · Polymers · doi:10.3390/polym15010066 · Cited by 12
Self-citationPolystyrene applications in organic electronics
He, Z., Asare‐Yeboah, K., & Bi, S. (2024) · Discover Electronics · doi:10.1007/s44291-024-00039-6 · Cited by 12
“At the same time, the amorphous regions provide the necessary flexibility and processability, making them suitable for use in flexible electronic devices [251].”
Grinyaev, Y. V., Васильевна, Ч. Н., Shilko, E. V., & Psakhie, S. G. (2018) · Polymers · doi:10.3390/polym10101155 · Cited by 12
Li, Y., Ma, G.-Q., Sun, Y., Huang, H., Pan, M., Zhang, G., Zhong, G., & Li, Z. (2020) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.0c03510 · Cited by 11
Şen, B. O., Çetin, S., Yahşi, U., & Soykan, U. (2021) · Journal of Polymer Research · doi:10.1007/s10965-021-02646-3 · Cited by 11
Sun, W., Liu, X., Yuan, L., Han, X., & Lu, J. (2023) · Polymer Engineering and Science · doi:10.1002/pen.26561 · Cited by 10
Effect of tensile loading history on mechanical properties for polyethylene
Jar, P. ‐. B. (2014) · Polymer Engineering and Science · doi:10.1002/pen.24042 · Cited by 10
Nagaraj, H., Clavier, G., Latour, B., Dequidt, A., Devémy, J., Garruchet, S., Goujon, F., Martzel, N., Blaak, R., Munch, É., et al. (2021) · The Journal of Chemical Physics · doi:10.1063/5.0050562 · Cited by 8
Smith, T., Gupta, C., Siavoshani, A. Y., & Wang, S. (2023) · Polymer · doi:10.1016/j.polymer.2023.125878 · Cited by 8
YOSHIDA, T., Nakane, T., OKADA, E., Sakurai, S., UCHIDA, M., & KANEKO, Y. (2023) · Polymer · doi:10.1016/j.polymer.2023.126190 · Cited by 8
Characterization of strain bursts in high density polyethylene by means of a novel nano creep test
Wilhelm, H., Spieckermann, F., Fischer, C., Polt, G., & Zehetbauer, M. (2019) · International Journal of Plasticity · doi:10.1016/j.ijplas.2019.01.010 · Cited by 8
Investigation on the crystallinity of crosslinked polyethylene
Sun, W., Liu, X., Yuan, L., Han, X., & Lu, J. (2024) · Polymer Bulletin · doi:10.1007/s00289-024-05177-1 · Cited by 8
“Olsson et al. predicted cavitation formation and oscillating stress–strain behavior, which indicated chain slip and crystal reorientation accompanied by repetitive chain transport to the amorphous region [21–24].”
Wang, J., Guo, H., Huang, X., Du, J., Zhang, Q., & Wang, K. (2024) · Macromolecular Rapid Communications · doi:10.1002/marc.202400760 · Cited by 7
Gloger, D., Rossegger, E., Gahleitner, M., & Wagner, C. (2019) · Journal of Polymer Engineering · doi:10.1515/polyeng-2019-0220 · Cited by 8
Influence of loading conditions on the tensile response of degraded polyamide 11
Olufsen, S. N., Nygård, P., Pais, C. I. T., Perillo, G., Hopperstad, O. S., & Clausen, A. H. (2021) · Polymer · doi:10.1016/j.polymer.2021.123966 · Cited by 7
Stress–Strain Relationships in Hydroxyl Substituted Polyethylene
Shrivastav, G., & Agarwal, M. (2016) · The Journal of Physical Chemistry B · doi:10.1021/acs.jpcb.6b05275 · Cited by 7
Elastoplastic and fracture behaviour of semi-crystalline polymers under multiaxial stress states
Manaia, J. P., Jesus, A. M. P. D., & Pires, F. M. A. (2018) · Frattura ed Integrità Strutturale · doi:10.3221/igf-esis.47.08 · Cited by 11
Cutillas, A. M., Sanz‐Serrano, D., Oh, S., Ventura, F., & de Ilarduya, A. M. (2023) · Macromolecular Bioscience · doi:10.1002/mabi.202300066 · Cited by 6
Guo, J., Fang, C., Zhong, Y., Shan, Y.-B., Miao, W., & Wang, Z. (2024) · Polymer · doi:10.1016/j.polymer.2024.127517 · Cited by 6
Zhang, D., Fan, H. Z., Zhang, Z., Cao, Y. Q., Wu, T., & Fu, Q. (2025) · Polymer · doi:10.1016/j.polymer.2025.128309 · Cited by 5
Metadata
- Authors
- Bartczak, Z., & Galeski, A.
- Affiliations
- Centrum Badań Molekularnych i Makromolekularnych Polskiej Akademii Nauk (PL)
- Corresponding author
- Bartczak, Z.
- ORCID
- Bartczak, Z.
- Venue
- Macromolecular Symposia
- Publisher
- Wiley
- Published
- 2010-08
- Volume
- 294
- Issue
- 1
- Pages
- 67-90
- ISSN
- 1022-1360 (ISSN-L)
- 1521-3900
- OpenAlex
- W2027895936
- Cited by
- 150
- References
- 124
- Citations by year
- 2026: 4 · 2025: 10 · 2024: 15 · 2023: 10 · 2022: 11 · 2021: 16 · 2020: 12 · 2019: 19 · 2018: 11 · 2017: 8 · 2016: 5 · 2015: 5 · 2014: 11 · 2013: 5 · 2012: 7
- FWCI
- 3.44
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Macromolecular Symposia (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Materials Science › Metals and Alloys › Microstructure and mechanical properties
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Keywords
- semicrystalline polymers, plastic deformation, chain folding, lamellar microstructure, crystallographic slip, cavitation, high strain deformation
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.