Plasticity of Semicrystalline Polymers
The DOI matches its Crossref record; 124 of the 124 references it cites were found in a registry or an index.
Abstract
Semi‐crystalline polymers can be deformed up to a very high strain. The deformation process involves frequently a complete molecular rearrangement of the chain‐folded lamellar morphology into a more or less chain‐unfolded fibrillar microstructure. This transformation is likely to occur through an intermediate state of high molecular disorder at a local scale. It led to the formulation of a concept of strain‐induced melting‐recrystallization process as a main mechanism of the structure transformation. In contrast, several structural features occurring at moderate plastic strains are relevant to strictly crystallographic processes. The plastic deformation process of semicrystalline polymers and the micromechanisms involved are discussed. A critical discussion of experimental findings is made to point out the strength or the deficiency of the various argumentations. It is demonstrated that the crystallographic slip mechanisms, including slips: transverse and along the chains are the basic deformation mechanisms in the deformation sequence, active at all strain levels. Direct microscopic evidence of chain slip activity even at well advanced stages of the deformation process is presented. In contrary, the melting‐recrystallization seems to be restricted to the high‐strain stage accompanied by chain unfolding and perhaps limited to only a small fraction of the crystalline phase. In addition the experimental results demonstrates clearly that the cavitation, necessary in the Peterlin's model, is really unessential in producing high deformation and appearance of the final highly oriented structure. This can be effectively accomplished with only crystallographic mechanisms employed. A very important role in the deformation sequence is played by the partially reversible shear deformation of amorphous interlamellar layers, producing not only high orientation of amorphous component but also influencing deeply the deformation of crystalline phase, since both phases are strongly connected and must deform simultaneously and consistently.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“For the amorphous phase, it was found that the shear of amorphous interlamellar layers was the principal deformation mechanism.”
From Erosion of the molecular network in the amorphous layers of polyethylene upon high-strain deformation (2016) · cites this paper as [2]
Citations
Cites
Encyclopedia of polymer science and engineering
Bawn, C. S. H. (1987) · Polymer · doi:10.1016/0032-3861(87)90274-6 · Cited by 4,203
Peierls, R. (1940) · Proceedings of the Physical Society · doi:10.1088/0959-5309/52/1/305 · Cited by 1,491
KELLER, A. (1962) · Polymer · doi:10.1016/0032-3861(62)90094-0 · Cited by 1,320
Dislocations in a simple cubic lattice
Nabarro, F. R. N. (1947) · Proceedings of the Physical Society · doi:10.1088/0959-5309/59/2/309 · Cited by 1,233
Molecular model of drawing polyethylene and polypropylene
Peterlin, A. (1971) · Journal of Materials Science · doi:10.1007/bf00550305 · Cited by 987
The use of a mathematical model to describe isothermal stress-strain curves in glassy thermoplastics
Haward, R. N., & Thackray, G. (1968) · Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences · doi:10.1098/rspa.1968.0029 · Cited by 646
Strength and toughness of crystalline polymer systems
Galeski, A. (2003) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2003.09.003 · Cited by 614
Structure and plastic deformation of polyethylene
Lin, L., & Argon, A. S. (1994) · Journal of Materials Science · doi:10.1007/bf01162485 · Cited by 574
Deformation mechanisms in crystalline polymers
Bowden, P. B., & Young, R. J. (1974) · Journal of Materials Science · doi:10.1007/bf00540553 · Cited by 551
Hiss, R., Hobeika, S., Lynn, C., & Strobl, G. (1999) · Macromolecules · doi:10.1021/ma981776b · Cited by 540
Sheldon, R. P. (1975) · Polymer · doi:10.1016/0032-3861(75)90265-7 · Cited by 508
The plastic deformation of metals
(1969) · Non-Destructive Testing · doi:10.1016/0029-1021(69)90092-9 · Cited by 490
Molecular morphology in semicrystalline polymers
Flory, P. J., & Yoon, D. Y. (1978) · Nature · doi:10.1038/272226a0 · Cited by 489
Keller, A. (1968) · Reports on Progress in Physics · doi:10.1088/0034-4885/31/2/304 · Cited by 411
Influence of structural and morphological factors on the mechanical properties of the polyethylenes
Popli, R., & Mandelkern, L. (1987) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.1987.090250301 · Cited by 361
Seguela, R. (2005) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.20414 · Cited by 327
Plastic Deformation of Crystalline Polymers: The Role of Cavitation and Crystal Plasticity
Pawlak, A., & Galeski, A. (2005) · Macromolecules · doi:10.1021/ma050842o · Cited by 314
Mechanical properties of model polyethylenes: tensile elastic modulus and yield stress
Crist, B., Fisher, C. J., & Howard, P. R. (1989) · Macromolecules · doi:10.1021/ma00194a035 · Cited by 275
Micromechanical modeling of the elasto-viscoplastic behavior of semi-crystalline polymers
VANDOMMELEN, J., PARKS, D., BOYCE, M., BREKELMANS, W., & BAAIJENS, F. (2003) · Journal of the Mechanics and Physics of Solids · doi:10.1016/s0022-5096(02)00063-7 · Cited by 268
Intrinsic Deformation Behavior of Semicrystalline Polymers
Schrauwen, B. A. G., Janssen, R. P. M., Govaert, L. E., & Meijer, H. E. H. (2004) · Macromolecules · doi:10.1021/ma035279t · Cited by 265
Polymer deformation in terms of spherulites
Hay, I. L., & Keller, A. (1965) · Kolloid-Zeitschrift & Zeitschrift für Polymere · doi:10.1007/bf01500379 · Cited by 255
Galeski, A., Bartczak, Z., Argon, A. S., & Cohen, R. E. (1992) · Macromolecules · doi:10.1021/ma00047a023 · Cited by 247
Self-citationButler, M. F., Donald, A. M., & Ryan, A. J. (1998) · Polymer · doi:10.1016/s0032-3861(97)00226-7 · Cited by 213
Deformation mechanisms in oriented high-density polyethylene
Young, R. J., Bowden, P. B., Ritchie, J. M., & Rider, J. G. (1973) · Journal of Materials Science · doi:10.1007/bf00755579 · Cited by 204
Lee, B. (1993) · Journal of the Mechanics and Physics of Solids · doi:10.1016/0022-5096(93)90018-b · Cited by 201
Deformation processes in polyethylene interpreted in terms of crystal plasticity
Frank, F. C., Keller, A., O'connor, A., & Wills, H. H. (1958) · Philosophical Magazine · doi:10.1080/14786435808243227 · Cited by 199
Butler, M. F., Donald, A. M., Bras, W., Mant, G. R., Derbyshire, G. E., & Ryan, A. J. (1995) · Macromolecules · doi:10.1021/ma00123a001 · Cited by 197
Developments in polymer fracture—1
Cooper, W. (1980) · Polymer Degradation and Stability · doi:10.1016/0141-3910(80)90018-x · Cited by 194
Deformation mechanisms and plastic resistance in single-crystal-textured high-density polyethylene
Bartczak, Z., Argon, A. S., & Cohen, R. E. (1992) · Macromolecules · doi:10.1021/ma00045a034 · Cited by 193
Self-citationHong, K., Rastogi, A., & Strobl, G. (2004) · Macromolecules · doi:10.1021/ma049174h · Cited by 192
Brown, N., & Ward, I. M. (1983) · Journal of Materials Science · doi:10.1007/bf01111960 · Cited by 191
Plastic deformation of amorphous and semi-crystalline materials
Escaig, B., & G'Sell, C. (1982) · Editions de Physique eBooks · Cited by 183
Hobeika, S., Men, Y., & Strobl, G. (2000) · Macromolecules · doi:10.1021/ma9910484 · Cited by 183
Simulation of large-strain plastic-deformation and texture evolution in high-density polyethylene
Lee, B. J., Argon, A. S., Parks, D. M., Ahzi, S., & Bartczak, Z. (1993) · Polymer · doi:10.1016/0032-3861(93)90039-d · Cited by 183
Self-citationKiho, H., Peterlin, A., & Geil, P. H. (1964) · Journal of Applied Physics · doi:10.1063/1.1713673 · Cited by 180
Evolution of the crystalline texture of high-density polyethylene during uniaxial compression
Bartczak, Z., Cohen, R. E., & Argon, A. S. (1992) · Macromolecules · doi:10.1021/ma00044a034 · Cited by 171
Self-citationParks, D. (1990) · Journal of the Mechanics and Physics of Solids · doi:10.1016/0022-5096(90)90029-4 · Cited by 169
Butler, M. F., Donald, A. M., & Ryan, A. J. (1997) · Polymer · doi:10.1016/s0032-3861(97)00111-0 · Cited by 162
A dislocation model for yield in polyethylene
Young, R. J. (1974) · Philosophical Magazine · doi:10.1080/14786439808206535 · Cited by 161
Identification of structural processes in deformation of oriented polyethylene
Keller, A., & Pope, D. P. (1971) · Journal of Materials Science · doi:10.1007/bf00550302 · Cited by 161
Xu, G., Argon, A. S., & Ortíz, M. (1995) · Philosophical magazine. A/Philosophical magazine. A. Physics of condensed matter. Structure, defects and mechanical properties · doi:10.1080/01418619508239933 · Cited by 143
Crystalline character in polymers
Peterlin, A. (1965) · Journal of Polymer Science Part C Polymer Symposia · doi:10.1002/polc.5070090106 · Cited by 136
On the plastic deformation of the amorphous component in semicrystalline polymers
Bartczak, Z., Gałęski, A., Argon, A. S., & Cohen, R. E. (1996) · Polymer · doi:10.1016/0032-3861(96)85856-3 · Cited by 133
Self-citationCritical configurations for dislocation nucleation from crack tips
Xu, G., Argon, A. S., & Ortíz, M. (1997) · Philosophical magazine. A/Philosophical magazine. A. Physics of condensed matter. Structure, defects and mechanical properties · doi:10.1080/01418619708205146 · Cited by 132
Crystallinity effects in the electron microscopy of polyethylene
Agar, A. W., Prank, F. C., & Keller, A. (1959) · Philosophical Magazine · doi:10.1080/14786435908238226 · Cited by 132
Gaucher-Miri, V., & Séguéla, R. (1997) · Macromolecules · doi:10.1021/ma9601878 · Cited by 129
Possible Wind Transport of Coffee Leaf Rust across the Atlantic Ocean
BOWDEN, J., Gregory, P. H., & Johnson, C. G. (1971) · Nature · doi:10.1038/229500b0 · Cited by 128
Effect of chain entanglements on plastic deformation behavior of linear polyethylene
Bartczak, Z. (2005) · Macromolecules · doi:10.1021/ma050815y · Cited by 116
Self-citationDeformation resistance in oriented nylon 6
Lin, L., & Argon, A. S. (1992) · Macromolecules · doi:10.1021/ma00041a025 · Cited by 110
Plastic deformation of polyethylene crystals as a function of crystal thickness and compression rate
Kazmierczak, T., Gałęski, A., & Argon, A. S. (2005) · Polymer · doi:10.1016/j.polymer.2005.06.073 · Cited by 109
Bartczak, Z., & Kozanecki, M. (2005) · Polymer · doi:10.1016/j.polymer.2005.06.100 · Cited by 108
Self-citationCRITICAL STRAINS DETERMINING THE YIELD BEHAVIOR OF s-PP*
Men, Y., & Strobl, G. (2001) · Journal of Macromolecular Science, Part B · doi:10.1081/mb-100107561 · Cited by 103
Butler, M. F., & Donald, A. M. (1998) · Macromolecules · doi:10.1021/ma970681r · Cited by 103
Dislocations in polyethylene crystals: line energies and deformation modes
Shadrake, L. G., & Guiu, F. (1976) · The Philosophical Magazine: A Journal of Theoretical Experimental and Applied Physics · doi:10.1080/14786437608223794 · Cited by 102
Clustering and percolation effects in microcrystalline starch-reinforced thermoplastic
Dufresne, A., & Cavaill�, J.-Y. (1998) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/(sici)1099-0488(19980915)36:12<2211::aid-polb18>3.0.co;2-2 · Cited by 101
Séguéla, R., & Darras, O. (1994) · Journal of Materials Science · doi:10.1007/bf01171546 · Cited by 100
Texture evolution in large strain simple shear deformation of high density polyethylene
Bartczak, Z., Argon, A. S., & Cohen, R. E. (1994) · Polymer · doi:10.1016/0032-3861(94)90905-9 · Cited by 100
Self-citationA yield criterion for anisotropic and pressure dependent solids such as oriented polymers
Caddell, R. M., Raghava, R. S., & Atkins, A. G. (1973) · Journal of Materials Science · doi:10.1007/bf00754900 · Cited by 100
Fu, Q., Men, Y., & Strobl, G. R. (2003) · Polymer · doi:10.1016/s0032-3861(02)00940-0 · Cited by 96
Temperature and stem length dependence of the yield stress of polyethylene
Brooks, N. W. J. (2000) · Polymer · doi:10.1016/s0032-3861(99)00362-6 · Cited by 93
Micromechanical modeling of intraspherulitic deformation of semicrystalline polymers
Dommelen, V. J. H., Parks, D., Boyce, M. C., Brekelmans, W. M., & Baaijens, F. F. (2003) · Polymer · doi:10.1016/s0032-3861(03)00558-5 · Cited by 93
Plastic yielding of partially crystalline polymers
Gent, A. N., & Madan, S. R. (1989) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.1989.090270713 · Cited by 89
Al-Hussein, M., & Strobl, G. (2002) · Macromolecules · doi:10.1021/ma020831k · Cited by 87
Tensile yield of polyethylene in relation to crystal thickness
Darras, O., & Séguéla, R. (1993) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.1993.090310702 · Cited by 83
On the tensile behaviour of oriented polyethylene
Keller, A., & Rider, J. G. (1966) · Journal of Materials Science · doi:10.1007/bf00549938 · Cited by 83
The effect of annealing on the structure and properties of isotactic polypropylene films
O'Kane, W. J., Young, R. J., & Ryan, A. J. (1995) · Journal of Macromolecular Science Part B · doi:10.1080/00222349508219502 · Cited by 82
The geometry of twinning and phase transformations in crystalline polyethylene
Bevis, M. J., & Crellin, E. B. (1971) · Polymer · doi:10.1016/0032-3861(71)90083-8 · Cited by 81
In situ AFM investigation of crazing in polybutene spherulites under tensile drawing
Thomas, C., Ferreiro, V., Coulon, G., & Séguéla, R. (2007) · Polymer · doi:10.1016/j.polymer.2007.07.062 · Cited by 79
Séguéla, R. (2002) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.10118 · Cited by 78
Thermal Initiation of Screw Dislocations in Polymer Crystal Platelets
Peterson, J. M. (1966) · Journal of Applied Physics · doi:10.1063/1.1707973 · Cited by 77
Xu, G., & Zhang, C. (2003) · Journal of the Mechanics and Physics of Solids · doi:10.1016/s0022-5096(03)00067-x · Cited by 76
Morphology and deformation behavior of “row-nucleated” polyoxymethylene film
Garber, C. A., & Clark, E. S. (1970) · Journal of Macromolecular Science Part B · doi:10.1080/00222347008229371 · Cited by 76
Stress-induced twinning and phase transformations in polyethylene single crystals
Allan, P., Crellin, E. B., & Bevis, M. (1973) · Philosophical Magazine · doi:10.1080/14786437308228920 · Cited by 74
Hong, K., & Strobl, G. (2006) · Macromolecules · doi:10.1021/ma051726o · Cited by 74
Temperature and strain-rate dependence of yield stress of polyethylene
Brooks, N. W. J., Duckett, R. A., & Ward, I. M. (1998) · Journal of Polymer Science Part B Polymer Physics · Cited by 72
Bartczak, Z., & Lezak, E. (2005) · Polymer · doi:10.1016/j.polymer.2005.04.092 · Cited by 68
Self-citationA SANS study of the plastic deformation mechanism in polyethylene
Wu, W., Wignall, G. D., & Mandelkern, L. (1992) · Polymer · doi:10.1016/0032-3861(92)90617-6 · Cited by 68
Rate mechanisms of plasticity in semi-crystalline polyethylene
Argon, A. S., Gałęski, A., & Kazmierczak, T. (2005) · Polymer · doi:10.1016/j.polymer.2005.06.126 · Cited by 66
Hong, K., Rastogi, A., & Strobl, G. (2004) · Macromolecules · doi:10.1021/ma049172x · Cited by 63
Development of texture in poly(ethylene terephthalate) by plane-strain compression
Bellare, A., Cohen, R. E., & Argon, A. S. (1993) · Polymer · doi:10.1016/0032-3861(93)90851-z · Cited by 62
A study on the orientation effects in polyethylene in the light of crystalline texture
Cowking, A., Rider, J. G., Hay, I. L., & Keller, A. (1968) · Journal of Materials Science · doi:10.1007/bf00757913 · Cited by 58
The plastic deformation of oriented polypropylene: tensile and compressive yield criteria
Shinozaki, D. M., & Groves, G. W. (1973) · Journal of Materials Science · doi:10.1007/bf00755584 · Cited by 57
Strain hardening of high density polyethylene
Haward, R. N. (2007) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.21123 · Cited by 55
Uniaxial Extension and Order Development in Flexible Chain Polymers
Porter, R. S., & Wang, L.-H. (1995) · Journal of Macromolecular Science, Part C: Polymer Reviews · doi:10.1080/15321799508014590 · Cited by 53
On the origins of giant screw dislocations in polymer lamellae
Keith, H. D., & Chen, W. Y. (2002) · Polymer · doi:10.1016/s0032-3861(02)00426-3 · Cited by 51
Bartczak, Z. (2005) · Polymer · doi:10.1016/j.polymer.2005.07.096 · Cited by 50
Self-citationEvolution in concepts concerning the mechanism of plasticity in solid polymers after the 1950s
Oleinik, E. F., Rudnev, S. N., & Salamatina, O. B. (2007) · Polymer Science Series A · doi:10.1134/s0965545x07120073 · Cited by 49
Chevron morphology in deformed semicrystalline polymers
Krumova, M., Henning, S., & Michler, G. H. (2006) · The Philosophical Magazine A Journal of Theoretical Experimental and Applied Physics · doi:10.1080/14786430500501671 · Cited by 48
Recovery of deformed polymers. III. Thermal properties
Park, J. B., & Uhlmann, D. R. (1973) · Journal of Applied Physics · doi:10.1063/1.1661862 · Cited by 48
Haward, R. N. (1999) · Polymer · doi:10.1016/s0032-3861(99)00124-x · Cited by 48
平面歪圧縮におけるポリエチレンの高歪変形に及ぼす分子パラメータの影響 I 応力歪挙動
Bartczak, Z., & Kozanecki, M. (2005) · Polymer · Cited by 47
Self-citationViscous-Force-Dominated Tensile Deformation Behavior of Oriented Polyethylene
Na, B., Zhang, Q., Fu, Q., Men, Y., Hong, K., & Strobl, G. (2006) · Macromolecules · doi:10.1021/ma052496g · Cited by 46
Rate Mechanism of Plasticity in the Crystalline Component of Semicrystalline Nylon 6
Lin, L., & Argon, A. S. (1994) · Macromolecules · doi:10.1021/ma00101a031 · Cited by 45
A molar mass induced transition in the yielding properties of linear polyethylene
Fu, Q., Men, Y., & Strobl, G. R. (2003) · Polymer · doi:10.1016/s0032-3861(03)00036-3 · Cited by 44
Plastic deformation of polyethylene crystals
Gleiter, H., & Argon, A. S. (1971) · Philosophical Magazine · doi:10.1080/14786437108216425 · Cited by 43
Peierls Stress for Screw Dislocations in Polyethylene
Peterson, J. M. (1968) · Journal of Applied Physics · doi:10.1063/1.1655887 · Cited by 42
Хотимский, В. С., Filippova, V. G., Bryantseva, I. S., Bondar, V. I., Shantarovich, V. P., & Yampolskii, Y. P. (2000) · Journal of Applied Polymer Science · doi:10.1002/1097-4628(20001128)78:9<1664::aid-app120>3.0.co;2-1 · Cited by 42
Direct observation of dislocations in polyethylene crystals
Petermann, J., & Gleiter, H. (1972) · Philosophical Magazine · doi:10.1080/14786437208229305 · Cited by 41
Plastic deformation of polymers
Ward, I. M. (1972) · Polymer · doi:10.1016/0032-3861(72)90012-2 · Cited by 40
Mechanically induced twinning and phase transformations
Hay, I. L., & Keller, A. (1970) · Journal of Polymer Science Part C Polymer Symposia · doi:10.1002/polc.5070300132 · Cited by 36
On molecular and textural reorientations in polyethylene caused by applied stress
Cowking, A., & Rider, J. G. (1969) · Journal of Materials Science · doi:10.1007/bf00549843 · Cited by 36
Tensile Deformation of Oriented Polyethylene
Hinton, T., & Rider, J. G. (1968) · Journal of Applied Physics · doi:10.1063/1.1655889 · Cited by 34
Deformation mechanisms in oriented high density polyethylene
Burnay, S. G., & Groves, G. W. (1978) · Journal of Materials Science · doi:10.1007/bf00541814 · Cited by 32
Yield and plastic resistance of α-crystals of isotactic polypropylene
Bartczak, Z., & Gałęski, A. (1999) · Polymer · doi:10.1016/s0032-3861(98)00614-4 · Cited by 31
Self-citationRecovery of post-yielding deformations in semicrystalline poly(ethylene-terephthalate)
Pegoretti, A., Guardini, A., Migliaresi, C., & Riccò, T. (2000) · Polymer · doi:10.1016/s0032-3861(99)00333-x · Cited by 30
Schönherr, H., Vancso, G. J., & Argon, A. S. (1995) · Polymer · doi:10.1016/0032-3861(95)95286-a · Cited by 29
Séguéla, R., Elkoun, S., & Gaucher, V. (1998) · Journal of Materials Science · doi:10.1023/a:1004340902180 · Cited by 29
The influence of the deformation temperature on the tensile properties of polyethylenes
Peacock, A. J., Mandelkern, L., Alamo, R. G., & Fatou, J. G. (1998) · Journal of Materials Science · doi:10.1023/a:1004379102567 · Cited by 23
Computer simulation of polyethylene crystals: Part 3 The core structure of dislocations
Bacon, D., & Tharmalingam, K. (1983) · Journal of Materials Science · doi:10.1007/bf00745587 · Cited by 23
Plastic deformation of polyethylene crystals by dislocation motion
Petermann, J., & Gleiter, H. (1973) · Journal of Materials Science · doi:10.1007/bf00561223 · Cited by 22
A small-angle neutron scattering study of the plastic deformation of linear polyethylene
Annis, B. K., Strizak, J. P., Wignall, G. D., Alamo, R. G., & Mandelkern, L. (1996) · Polymer · doi:10.1016/0032-3861(96)81608-9 · Cited by 21
Elastic line energies and line tensions of dislocations in polyethylene crystals
Shadrake, L. G., & Guiu, F. (1979) · Philosophical magazine. A/Philosophical magazine. A. Physics of condensed matter. Structure, defects and mechanical properties · doi:10.1080/01418617908239306 · Cited by 21
UHLMANN, D. R., & Park, J. B. (1971) · Journal of Applied Physics · doi:10.1063/1.1659688 · Cited by 19
On the plastic behavior of homogeneous ethylene copolymers compared with heterogeneous copolymers
Gaucher, V., Elkoun, S., & Séguéla, R. (1997) · Polymer Engineering and Science · doi:10.1002/pen.11815 · Cited by 19
Comparison of twinning produced by rolling and annealing in high‐ and low‐density polyethylene
Lewis, D., Wheeler, E. J., Maddams, W. F., & Preedy, J. E. (1972) · Journal of Polymer Science Part A-2 Polymer Physics · doi:10.1002/pol.1972.160100216 · Cited by 19
Critical Resolved Shear Stress for [001] Slip in Polyethylene
Bowden, P. B., & Young, R. J. (1971) · Nature Physical Science · doi:10.1038/physci229023a0 · Cited by 18
On deformation of polyethylene: the question of melting and recrystallization
Chuah, H. H., Lin, J. S., & Porter, R. S. (1986) · Macromolecules · doi:10.1021/ma00165a012 · Cited by 17
Plastic deformation of polyethylene crystals on copper and NaCl crystal substrates
Wu, W., Argon, A. S., & Turner, A. P. L. (1972) · Journal of Polymer Science Polymer Physics Edition · doi:10.1002/pol.1972.180101209 · Cited by 12
Crystal deformation during the growth of kink bands in oriented polyethylene
Robertson, R. E. (1971) · Journal of Polymer Science Part A-2 Polymer Physics · doi:10.1002/pol.1971.160090707 · Cited by 11
Energetics of nucleation of half dislocation loops at a surface crack
Xu, G. (2002) · Philosophical magazine. A/Philosophical magazine. A. Physics of condensed matter. Structure, defects and mechanical properties · doi:10.1080/01418610208240431 · Cited by 10
Charoensirisomboon, P., Saito, H., Inoue, T., Oishi, Y., & Mori, K. (1998) · Polymer · doi:10.1016/s0032-3861(97)00530-2 · Cited by 9
Nano- and Micromechanics of Crystalline Polymers
Gałęski, A., & Régnier, G. (2009) · Carl Hanser Verlag GmbH & Co. KG eBooks · doi:10.3139/9783446430129.001 · Cited by 9
Tanaka, N. (1996) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/bf01983618 · Cited by 8
High‐strain deformation of polyethylenes in plane‐strain compression at elevated temperatures
Lezak, E., & Bartczak, Z. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.26011 · Cited by 7
Self-citation
Research works printed but not linked: 17
- Oleinik E. F., 2003, Polymer Science C, 45, 17
- Haudin J.‐M., 1982, Plastic Deformation of Amorphous and Semicrystalline Materials, 291
- Galeski A., 2009, Nano‐ and Micromechanics of Polymer Blends and Composites, 3, 10.1007/978-3-446-43012-9_1 · doi:10.1007/978-3-446-43012-9_1
- Lotz B., 1993, Material Science and Technology A Comprehensive Treatment, 79
- Barham P. J., 1993, Material Science and Technology A Comprehensive Treatment, 153
- Crist B., 1993, Material Science and Technology A Comprehensive Treatment, 427
- Seguela R., 2007, e‐Polymers, 032, 1
- Young R. J., 1976, Philos Mag, 30, 86
- Schmid E., 1950, Plasticity of Crystals
- G'Sell C., 1993, Introduction: a la mechanique des polymeres
- Porter R. S., 1971, Polymer Preprints, 12, 39
- Wunderlich B., 1973, Macromolecular Physics, Crystal Structure, Morphology, Defects
- Young R. J., 1988, Material Forum, 11, 210
- Crist B., 1989, Polymer Communications, 30, 69
- 10.1002/(SICI)1099-0488(19980915)36:12<2177::AID-POLB15>3.0.CO;2-X · doi:10.1002/(sici)1099-0488(19980915)36:12<2177::aid-polb15>3.0.co;2-x
- 10.1002/polb.10118 · DOI · Paper page
- Park J. B., 1973, Journal of Applied Physics, 42, 3800
Cited by
Xu, S., Zhou, J., & Pan, P. (2023) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2023.101676 · Cited by 166
Plastic Deformation Mechanisms of Semicrystalline and Amorphous Polymers
Jabbari-Farouji, S., Rottler, J., Lame, O., Makke, A., Perez, M., & Barrat, J.-L. (2015) · ACS Macro Letters · doi:10.1021/mz500754b · Cited by 147
Kassab, A., Al Nabhani, D., Mohanty, P., Pannier, C., & Ayoub, G. Y. (2023) · Polymers · doi:10.3390/polym15193881 · Cited by 141
“Both these crystalline block segments and the interlinking amorphous regions adjust their orientation to align with the direction of maximum stretch, known as the principal stretch direction [219].”
BackgroundKim, J. M., Locker, R., & Rutledge, G. C. (2014) · Macromolecules · doi:10.1021/ma402297a · Cited by 125
Mechanical Properties of Polymer Blends
Bartczak, Z., & Gałęski, A. (2014) · Springer eBooks · doi:10.1007/978-94-007-6064-6_13 · Cited by 106
Self-citation
Metadata
- Authors
- Bartczak, Z., & Galeski, A.
- Affiliations
- Centrum Badań Molekularnych i Makromolekularnych Polskiej Akademii Nauk (PL)
- Corresponding author
- Bartczak, Z.
- ORCID
- Bartczak, Z.
- Venue
- Macromolecular Symposia
- Publisher
- Wiley
- Published
- 2010-08
- Volume
- 294
- Issue
- 1
- Pages
- 67-90
- ISSN
- 1022-1360 (ISSN-L)
- 1521-3900
- OpenAlex
- W2027895936
- Cited by
- 150
- References
- 124
- Citations by year
- 2026: 4 · 2025: 10 · 2024: 15 · 2023: 10 · 2022: 11 · 2021: 16 · 2020: 12 · 2019: 19 · 2018: 11 · 2017: 8 · 2016: 5 · 2015: 5 · 2014: 11 · 2013: 5 · 2012: 7
- FWCI
- 3.44
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Macromolecular Symposia (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Materials Science › Metals and Alloys › Microstructure and mechanical properties
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Keywords
- semicrystalline polymers, plastic deformation, chain folding, lamellar microstructure, crystallographic slip, cavitation, high strain deformation
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.