Synthesis and characterization of poly(L‐lactide‐co‐ε‐caprolactone) (B)‐poly(L‐lactide) (A) ABA block copolymers
The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
ABA triblock copolymers of L‐lactide (LL) and ε‐caprolactone (CL), designated as PLL‐P(LL‐co‐CL)‐PLL, were synthesized via a two‐step ring‐opening polymerization in bulk using diethylene glycol and stannous octoate as the initiating system. In the first‐step reaction, an approximately 50:50 mol% P(LL‐co‐CL) random copolymer (prepolymer) was prepared as the middle (B) block. This was then chain extended in the second‐step reaction by terminal block polymerization with more L‐lactide. The percentage yields of the triblock copolymers were in excess of 95%. The prepolymers and triblock copolymers were characterized using a combination of dilute‐solution viscometry, gel permeation chromatography (GPC), 1 H‐ and 13 C‐NMR, and differential scanning calorimetry (DSC). It was found that the molecular weight of the prepolymer was controlled primarily by the diethylene glycol concentration. All of the triblock copolymers had molecular weights higher than their respective prepolymers. 13 C‐NMR analysis confirmed that the prepolymers contained at least some random character and that the triblock copolymers consisted of additional terminal PLL end (A) blocks. From their DSC curves, the triblock copolymers were seen to be semi‐crystalline in morphology. Their glass transition, solid‐state crystallization, and melting temperature ranges, together with their heats of melting, all increased as the PLL end (A) block length increased. Copyright © 2005 John Wiley & Sons, Ltd.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Synthesis of polylactides with different molecular weights
Hyon, S.-H., Jamshidi, K., & Ikada, Y. (1997) · Biomaterials · doi:10.1016/s0142-9612(97)00076-8 · Cited by 237
Polymerization temperature effects on the properties of l-lactide and ?-caprolactone copolymers
Grijpma, D. W., & Pennings, A. J. (1991) · Polymer Bulletin · doi:10.1007/bf00316903 · Cited by 165
Synthesis, characterization and degradation of ABA block copolymer of l-lactide and ε-caprolactone
Qian, H., Bei, J., & Wang, S. (2000) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(00)00031-8 · Cited by 152
Synthesis and crystallization behavior of poly( l -lactide)- block -poly(ϵ-caprolactone) copolymer
Kim, J. K., Park, D.-J., Lee, M.-S., & Ihn, K. J. (2001) · Polymer · doi:10.1016/s0032-3861(01)00217-8 · Cited by 147
Cited by
Castillo, R. V., & Müller, A. J. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.03.002 · Cited by 253
Lipik, V. T., Widjaja, L. K., Liow, S. S., Abadie, M. J. M., & Venkatraman, S. S. (2010) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2010.07.027 · Cited by 50
Lipik, V. T., Kong, J. F., Chattopadhyay, S., Widjaja, L. K., Liow, S. S., Venkatraman, S. S., & Abadie, M. J. M. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.05.027 · Cited by 27
Liu, X., Liu, S., Li, K., Fan, Y., Feng, S., Peng, L., Zhang, T., Wang, X., Chen, D., Xiong, C., et al. (2021) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2021.127550 · Cited by 24
Lipik, V. T., & Abadie, M. J. M. (2012) · International Journal of Biomaterials · doi:10.1155/2012/390947 · Cited by 11
“where ΔH is the experimental melting enthalpy of polymer in J/g and ΔH100 is the melting enthalpy of the polymer with 100% crystallinity and ΔH100 = 139 J/g for polycaprolactone [6] and ΔH100 = 93 J/g for polylactide [25].”
Background
Metadata
- Authors
- Baimark, Y., & Molloy, R.
- Venue
- Polymers for Advanced Technologies
- Publisher
- Wiley
- Published
- 2005-02-28
- Volume
- 16
- Issue
- 4
- Pages
- 332-337
- ISSN
- 1042-7147 (ISSN-L)
- 1099-1581
- OpenAlex
- W2050390773
- Cited by
- 23
- References
- 4
- FWCI
- 0.49
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.