The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Surface characterization of flax, hemp and cellulose fibers; Surface properties and the water uptake behavior
Abstract
The surface characteristics of several natural fibers—flax, hemp and cellulose—were investigated using scanning electron microscopy, BET‐surface area and zeta (ζ‐) potential measurements. ζ‐Potential measurements using the streaming potential method were performed in order to study the water uptake behavior as well as the surface properties of several natural fibers. The influence of different flax‐fiber separation methods and several modifications, like industrial purification, and such a treatment followed by alkaline purification as well as polypropylene grafting on the fiber surface morphology, surface area and time‐ and pH‐depending ζ‐potentials were studied. The time‐dependence of the ζ‐potential, measured in 1 mM KCl solution, offeres and alternative possibility to estimate the water uptake behavior for nearly all investigated natural fibers. The water uptake data derived from the ζ‐potential measurements (ζ = f(t)) were compared with data from conventional water adsorption studies for some chosen examples.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
On a theory of the van der waals adsorption of gases
Brunauer, S., Deming, L. S., Deming, W. E., & Teller, E. (1940) · Journal of the American Chemical Society · doi:10.1021/ja01864a025 · Cited by 4,829
Cited by
Biocomposites reinforced with natural fibers: 2000–2010
Faruk, O., Bledzki, A. K., Fink, H.-P., & Sain, M. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.04.003 · Cited by 4,262
DHAKAL, H., ZHANG, Z., & RICHARDSON, M. (2007) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.06.019 · Cited by 1,622
Rangappa, S. M., Siengchin, S., Parameswaranpillai, J., Jawaid, M., & Ozbakkaloglu, T. (2022) · Polymer Composites · doi:10.1002/pc.26413 · Cited by 469
The hygroscopic behavior of plant fibers: a review
Célino, A., Fréour, S., Jacquemin, F., & Casari, P. (2014) · Frontiers in Chemistry · doi:10.3389/fchem.2013.00043 · Cited by 461
Syduzzaman, M., Al Faruque, M. A., Bilisik, K., & Naebe, M. (2020) · Coatings · doi:10.3390/coatings10100973 · Cited by 282
Hemp Fibre Properties and Processing Target Textile: A Review
Zimniewska, M. (2022) · Materials · doi:10.3390/ma15051901 · Cited by 214
Dayo, A. Q., Gao, B.-C., Wang, J., Liu, W.-B., Derradji, M., Shah, A. H., & Babar, A. A. (2017) · Composites Science and Technology · doi:10.1016/j.compscitech.2017.03.024 · Cited by 158
Cell wall microstructure, pore size distribution and absolute density of hemp shiv
Jiang, Y., Lawrence, M., Ansell, M. P., & Hussain, A. (2018) · Royal Society Open Science · doi:10.1098/rsos.171945 · Cited by 115
Metadata
- Authors
- Bismarck, A., Aranberri‐Askargorta, I., Springer, J., Lampke, T., Wielage, B., Stamboulis, A., Shenderovich, I., & Limbach, H.
- Venue
- Polymer Composites
- Publisher
- Wiley
- Published
- 2002-10
- Volume
- 23
- Issue
- 5
- Pages
- 872-894
- ISSN
- 0272-8397 (ISSN-L)
- 1548-0569
- OpenAlex
- W2131686925
- Cited by
- 453
- References
- 1
- FWCI
- 3.72
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
