Influence of nanofillers on biodegradable composites: A comprehensive review
The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Abstract
The continuous delivery of E‐waste from petroleum‐based products creates ecological and environmental problems due to non‐biodegradable polymers, which release harmful chemicals and toxic gases. This results in biodegradable polymers/fibers appearance, which are biocompatible and degrade in the surrounding environments without causing any environmental pollution and these relieve environmental burden. However, the bio‐based materials are unable to meet certain properties in the way of flexibility, dielectric properties, electrical properties, water and gas vapor barrier properties. The current day's research focus is towards the implementation of biodegradable composites properties by introducing different nanostructures. The biopolymers/biofibers are used as raw material in concern with environmental aspects. Nowadays researchers are supplementing a new form of materials known as nanofillers in various biopolymer‐based composites in a small amount. This nanofillers will act as additives and helps in enhancing the different properties such as mechanical, thermal, flame retardancy and water absorption behavior of the nano composite materials as well as maintaining the optimum density of them. The nanocomposites applications are extended in various sectors for the reason of higher surface area, aspect ratio, and superior properties. This review outlines the types of biofibers/biopolymers and their characterization, types of nanofillers, and their characterization, and summarizes the various functional properties of nanocomposites with their applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Characteristics of hemicellulose, cellulose and lignin pyrolysis
Yang, H., Yan, R., Chen, H., Lee, D. H., & Zheng, C. (2007) · Fuel · doi:10.1016/j.fuel.2006.12.013 · Cited by 8,155
Cellulose: Fascinating Biopolymer and Sustainable Raw Material
Klemm, D., Heublein, B., Fink, H., & Bohn, A. (2005) · Angewandte Chemie International Edition · doi:10.1002/anie.200460587 · Cited by 7,551
JOHN, M., & THOMAS, S. (2008) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2007.05.040 · Cited by 2,453
Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications
Siqueira, G., Bras, J., & Dufresne, A. (2010) · Polymers · doi:10.3390/polym2040728 · Cited by 1,328
Development of wheat gluten/nanocellulose/titanium dioxide nanocomposites for active food packaging
El-Wakil, N. A., Hassan, E. A., Abou-Zeid, R. E., & Dufresne, A. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.01.076 · Cited by 304
Hornak, J., Trnka, P., Kadlec, P., Michal, O., Mentlík, V., Šutta, P., Csányi, G. M., & Tamus, Z. Á. (2018) · Nanomaterials · doi:10.3390/nano8060381 · Cited by 124
Cited by
Rashid, A. B., Haque, M., Islam, S. M. M., & Uddin Labib, K. M. R. (2024) · Heliyon · doi:10.1016/j.heliyon.2024.e24692 · Cited by 361
Retracted
Metadata
- Authors
- Jagadeesh, P., Puttegowda, M., Mavinkere Rangappa, S., & Siengchin, S.
- Venue
- Polymer Composites
- Publisher
- Wiley
- Published
- 2021-09
- Volume
- 42
- Issue
- 11
- Pages
- 5691-5711
- ISSN
- 0272-8397 (ISSN-L)
- 1548-0569
- OpenAlex
- W3197205614
- Cited by
- 251
- References
- 6
- FWCI
- 13.52
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.