The DOI matches its Crossref record; 43 of the 43 references it cites were found in a registry or an index.
Development of polymer blend morphology during compounding in a twin‐screw extruder. Part I: Droplet dispersion and coalescence—a review
Abstract
The theoretical and experimental data on the breakup of droplets are reviewed. Several factors influence development of droplets: flow type and its intensity, viscosity ratio, elasticity of polymers, composition, thermodynamic interactions, time, etc. For Newtonian systems undergoing small, linear deformation, both the viscosity ratio and the capillary number control deformability of drops. On the other hand, the breakup process can be described by the dimensionless breakup time and the critical capillary number. Drops are more efficiently broken in elongational flow than in shear, especially when the viscosity ratio λ ⩾ 3. The drop deformation and breakup seems to be more difficult in viscoelastic systems than in Newtonian ones. There is no theory able to describe the deformability of viscoelastic droplet suspended in a viscoelastic or even Newtonian medium. The effect of droplets coalescence on the final morphology ought to be considered, even at low concentration of the dispersed phase, ϕ d ⩾ 0.005. Several drop breakup and coalescence theories were briefly reviewed. However, they are of little direct use for quantitative prediction of the polymer blend morphology during compounding in a twin‐screw extruder. Their value is limited to serving as general guides to the process modeling.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Eine neue Bestimmung der Moleküldimensionen
Einstein, A. (1906) · Annalen der Physik · doi:10.1002/andp.19063240204 · Cited by 4,525
Rayleigh, L. (1878) · Proceedings of the London Mathematical Society · doi:10.1112/plms/s1-10.1.4 · Cited by 3,064
The formation of emulsions in definable fields of flow
Taylor, G. I. (1934) · Proceedings of the Royal Society of London. Series A, Containing Papers of a Mathematical and Physical Character · doi:10.1098/rspa.1934.0169 · Cited by 2,500
VI. On the capillary phenomena of jets
Strutt, J. W. (1879) · Proceedings of the Royal Society of London · doi:10.1098/rspl.1879.0015 · Cited by 2,078
The viscosity of a fluid containing small drops of another fluid
Taylor, G. I. (1932) · Proceedings of the Royal Society of London. Series A, Containing Papers of a Mathematical and Physical Character · doi:10.1098/rspa.1932.0169 · Cited by 1,969
The viscosity of a concentrated suspension of spherical particles
Mooney, M. (1951) · Journal of Colloid Science · doi:10.1016/0095-8522(51)90036-0 · Cited by 1,725
Berichtigung zu meiner Arbeit: „Eine neue Bestimmung der Moleküldimensionen”︁
Einstein, A. (1911) · Annalen der Physik · doi:10.1002/andp.19113390313 · Cited by 1,608
GRACE†, H. P. (1982) · Chemical Engineering Communications · doi:10.1080/00986448208911047 · Cited by 1,497
Phase structure and adhesion in polymer blends: A criterion for rubber toughening
Wu, S. (1985) · Polymer · doi:10.1016/0032-3861(85)90015-1 · Cited by 1,426
A New Determination of Molecular Dimensions
(2021) · Einstein's Miraculous Year · doi:10.2307/j.ctv1h9dh0m.9 · Cited by 1,291
Formation of dispersed phase in incompatible polymer blends: Interfacial and rheological effects
Wu, S. (1987) · Polymer Engineering & Science · doi:10.1002/pen.760270506 · Cited by 1,117
On the instability of a cylindrical thread of a viscous liquid surrounded by another viscous fluid
Tomotika, S. (1935) · Proceedings of the Royal Society of London. Series A - Mathematical and Physical Sciences · doi:10.1098/rspa.1935.0104 · Cited by 1,093
Possible mechanism for the spontaneous rupture of thin, free liquid films
Vrij, A. (1966) · Discussions of the Faraday Society · doi:10.1039/df9664200023 · Cited by 880
The Deformation of Small Viscous Drops and Bubbles in Shear Flows
Rallison, J. M. (1984) · Annual Review of Fluid Mechanics · doi:10.1146/annurev.fl.16.010184.000401 · Cited by 851
Polymer alloys and blends: Thermodynamics and rheology
Higgins, J. S. (1990) · Polymer · doi:10.1016/0032-3861(90)90099-k · Cited by 680
Bentley, B. J., & Leal, L. G. (1986) · Journal of Fluid Mechanics · doi:10.1017/s0022112086002811 · Cited by 620
Rumscheidt, F. D., & Mason, S. G. (1961) · Journal of Colloid Science · doi:10.1016/0095-8522(61)90003-4 · Cited by 466
An experimental study of transient effects in the breakup of viscous drops
Stone, H. A., Bentley, B. J., & Leal, L. G. (1986) · Journal of Fluid Mechanics · doi:10.1017/s0022112086001118 · Cited by 455
Relaxation and breakup of an initially extended drop in an otherwise quiescent fluid
Stone, H. A., & Leal, L. G. (1989) · Journal of Fluid Mechanics · doi:10.1017/s0022112089000194 · Cited by 437
Rheological properties of nondilute suspensions of deformable particles
Choi, S. J., & Schowalter, W. R. (1975) · The Physics of Fluids · doi:10.1063/1.861167 · Cited by 381
Modes of dispersion of viscoelastic fluids in flow
Vanoene, H. (1972) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(72)90355-4 · Cited by 374
On the viscosity‐concentration dependence of immiscible polymer blends
Utracki, L. A. (1991) · Journal of Rheology · doi:10.1122/1.550248 · Cited by 369
Self-citationFavis, B. D., & Chalifoux, J. P. (1987) · Polymer Engineering & Science · doi:10.1002/pen.760272105 · Cited by 357
Influence of composition on the morphology of polypropylene/polycarbonate blends☆
FAVIS, B., & CHALIFOUX, J. (1988) · Polymer · doi:10.1016/0032-3861(88)90388-6 · Cited by 280
Willis, J. M., & Favis, B. D. (1988) · Polymer Engineering & Science · doi:10.1002/pen.760282111 · Cited by 248
The measurement of interfacial tension in polymer/polymer systems: The breaking thread method
Elemans, P. H. M., Janssen, J. M. H., & Meijer, H. E. H. (1990) · Journal of Rheology · doi:10.1122/1.550087 · Cited by 237
The effect of processing parameters on the morphology of an immiscible binary blend
Favis, B. D. (1990) · Journal of Applied Polymer Science · doi:10.1002/app.1990.070390207 · Cited by 227
Elmendorp, J. J., & Van Der Vegt, A. K. (1986) · Polymer Engineering & Science · doi:10.1002/pen.760261908 · Cited by 220
A numerical study of the deformation and burst of a viscous drop in general shear flows
Rallison, J. M. (1981) · Journal of Fluid Mechanics · doi:10.1017/s002211208100116x · Cited by 215
Deformation and Breakup of Liquid Droplets in a Simple Shear Field
Karam, H. J., & Bellinger, J. C. (1968) · Industrial & Engineering Chemistry Fundamentals · doi:10.1021/i160028a009 · Cited by 193
Plochocki, A. P., Dagli, S. S., & Andrews, R. D. (1990) · Polymer Engineering & Science · doi:10.1002/pen.760301207 · Cited by 169
Analysis of Morphology Formation in Elastomer Blends
Tokita, N. (1977) · Rubber Chemistry and Technology · doi:10.5254/1.3535144 · Cited by 161
Phase size/composition dependence in immiscible blends: Experimental and theoretical considerations
Favis, B. D., & Willis, J. M. (1990) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.1990.090281208 · Cited by 158
A study on polymer blending microrheology: Part 1
Elmendorp, J. J., & Maalcke, R. J. (1985) · Polymer Engineering and Science · doi:10.1002/pen.760251608 · Cited by 131
Drop Breakup in Simple Shear Fields of Viscoleastic Fluids
Flumerfelt, R. W. (1972) · Industrial & Engineering Chemistry Fundamentals · doi:10.1021/i160043a005 · Cited by 113
Liang, B., White, J. L., Spruiell, J. E., & Goswami, B. C. (1983) · Journal of Applied Polymer Science · doi:10.1002/app.1983.070280616 · Cited by 109
Polymer alloys and blends: Recent advances
Favis, B. D. (1991) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.5450690303 · Cited by 107
Particle motions in sheared suspensions
Bartok, W., & Mason, S. G. (1959) · Journal of Colloid Science · doi:10.1016/0095-8522(59)90065-0 · Cited by 99
Dual phase continuity in polymer blends
Lyngaae‐Jørgensen, J., & Utracki, L. A. (1991) · Makromolekulare Chemie Macromolecular Symposia · doi:10.1002/masy.19910480117 · Cited by 99
Self-citationRheology of fiber‐ or flake‐filled plastics
Utracki, L. A., & Fisa, B. (1982) · Polymer Composites · doi:10.1002/pc.750030406 · Cited by 62
Self-citationFortelný, I., Kamenická, D., & Kovář, J. (1988) · Die Angewandte Makromolekulare Chemie · doi:10.1002/apmc.1988.051640110 · Cited by 42
Droplet size of the minor component in the mixing of melts of immiscible polymers
Fortelný, I., & Kovář, J. (1989) · European Polymer Journal · doi:10.1016/0014-3057(89)90239-5 · Cited by 42
Fortelný, I., Michálková, D., Koplíková, J., et al. (1990) · Die Angewandte Makromolekulare Chemie · doi:10.1002/apmc.1990.051790114 · Cited by 28
Cited by
Polycaprolactone: Synthesis, Properties, and Applications
Guarino, V., Gentile, G., Sorrentino, L., & Ambrosio, L. (2017) · Encyclopedia of Polymer Science and Technology · doi:10.1002/0471440264.pst658 · Cited by 163
Macro, micro and nanostructured morphologies of multiphase polymer systems
Huang, H. (2011) · Handbook of Multiphase Polymer Systems · doi:10.1002/9781119972020.ch6 · Cited by 16
Horák, Z., Fortelný, I., Kolařík, J., Hlavatá, D., & Sikora, A. (2005) · Encyclopedia of Polymer Science and Technology · doi:10.1002/0471440264.pst276 · Cited by 12
Metadata
- Authors
- Utracki, L. A., & Shi, Z. H.
- Venue
- Polymer Engineering & Science
- Publisher
- Wiley
- Published
- 1992-12
- Volume
- 32
- Issue
- 24
- Pages
- 1824-1833
- ISSN
- 0032-3888 (ISSN-L)
- 1548-2634
- OpenAlex
- W2025209577
- Cited by
- 418
- References
- 43
- FWCI
- 7.93
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.