Melt electrospinning of polycaprolactone and its blends with poly(ethylene glycol)
Open accessThe DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Melt electrospinning is one aspect of electrospinning with relatively little published literature, although the technique avoids solvent accumulation and/or toxicity which is favoured in certain applications. In the study reported, we melt‐electrospun blends of poly(ε‐caprolactone) (PCL) and an amphiphilic diblock copolymer consisting of poly(ethylene glycol) and PCL segments (PEG‐block‐PCL). A custom‐made electrospinning apparatus was built and various combinations of instrument parameters such as voltage and polymer feeding rate were investigated. Pure PEG‐block‐PCL copolymer melt electrospinning did not result in consistent and uniform fibres due to the low molecular weight, while blends of PCL and PEG‐block‐PCL, for some parameter combinations and certain weight ratios of the two components, were able to produce continuous fibres significantly thinner (average diameter of ca 2 µm) compared to pure PCL. The PCL fibres obtained had average diameters ranging from 6 to 33 µm and meshes were uniform for the lowest voltage employed while mesh uniformity decreased when the voltage was increased. This approach shows that PCL and blends of PEG‐block‐PCL and PCL can be readily processed by melt electrospinning to obtain fibrous meshes with varied average diameters and morphologies that are of interest for tissue engineering purposes. Copyright © 2010 Society of Chemical Industry
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The return of a forgotten polymer—Polycaprolactone in the 21st century
Woodruff, M. A., & Hutmacher, D. W. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.04.002 · Cited by 4,033
Self-citationPoly(lactide) nanofibers produced by a melt‐electrospinning system with a laser melting device
Ogata, N., Yamaguchi, S., Shimada, N., Lu, G., Iwata, T., Nakane, K., & Ogihara, T. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.25782 · Cited by 151
Cited by
Direct writing by way of melt electrospinning
Brown, T. D., Dalton, P. D., & Hutmacher, D. W. (2011) · Advanced Materials · doi:10.1002/adma.201103482 · Cited by 800
Self-citationMelt electrospinning today: An opportune time for an emerging polymer process
Brown, T. D., Dalton, P. D., & Hutmacher, D. W. (2016) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2016.01.001 · Cited by 542
Self-citationPoly (lactic acid)-based biomaterials for orthopaedic regenerative engineering
Narayanan, G., Vernekar, V. N., Kuyinu, E. L., & Laurencin, C. T. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.04.015 · Cited by 484
Green Electrospun Nanofibers and Their Application in Air Filtration
Lv, D., Zhu, M., Jiang, Z., Jiang, S., Zhang, Q., Xiong, R., & Huang, C. (2018) · Macromolecular Materials and Engineering · doi:10.1002/mame.201800336 · Cited by 375
Needleless Melt‐Electrospinning of Polypropylene Nanofibres
Fang, J., Zhang, L., Sutton, D., Wang, X., & Lin, T. (2012) · Journal of Nanomaterials · doi:10.1155/2012/382639 · Cited by 334
Metadata
- Authors
- Detta, N., Brown, T. D., Edin, F. K., Albrecht, K., Chiellini, F., Chiellini, E., Dalton, P. D., & Hutmacher, D. W.
- Venue
- Polymer International
- Publisher
- Wiley
- Published
- 2010-10-19
- Volume
- 59
- Issue
- 11
- Pages
- 1558-1562
- ISSN
- 0959-8103 (ISSN-L)
- 1097-0126
- OpenAlex
- W1992113388
- Cited by
- 116
- References
- 2
- FWCI
- 2.32
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Melt electrospinning of polycaprolactone and its blends with poly(ethylene glycol). https://app.cochat.ai/papers/10.1002/pi.2954
- The paper
- Detta, N., Brown, T. D., Edin, F. K., Albrecht, K., Chiellini, F., Chiellini, E., Dalton, P. D., & Hutmacher, D. W. (2010). Melt electrospinning of polycaprolactone and its blends with poly(ethylene glycol). Polymer International. https://doi.org/10.1002/pi.2954
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.