Synthesis and characterization of poly(L‐lactide)s and poly(D‐lactide)s of controlled molecular weight
The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Abstract
High molecular weight poly(L‐lactide)s (PLLAs) and poly(D‐lactide)s (PDLAs) were synthesized in toluene at 70 °C by ring‐opening polymerization of optically pure L‐lactide and D‐lactide, using tin(II) 2‐ethylhexanoate (SnOct 2) and 2‐(2‐methoxyethoxy)ethanol as initiator and coinitiator, respectively. Under these conditions, polarimetry as well as 13 C NMR spectroscopy indicated that the synthesized poly(lactide)s (PLAs) are more than 99% isotactic. The molecular weight was successfully controlled by adjusting the monomer‐to‐initiator molar ratio. Gel permeation chromatography and MALDI‐TOF mass spectrometry analyses showed that the polydispersity index of the PLAs is below 1.1. Moreover, MALDI‐TOF spectra showed two different chain distributions, one characterized by an even number of lactic acid repeat units and the other by an odd number of lactic acid repeat units. The second distribution, indicative of the presence of intermolecular transesterification reactions, appears at the very beginning of the polymerization and its intensity increases with the polymerization time. Finally, a reversible reaction kinetic model was used to determine the monomer equilibrium concentration ([M]eq = 1.4 ± 0.5%) and the propagation rate constant (kp = 14.4 ± 0.5 L mol−1 h−1) of the polymerization. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1944–1955, 2007
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Controlled Ring-Opening Polymerization of Lactide and Glycolide
Dechy-Cabaret, O., Martin-Vaca, B., & Bourissou, D. (2004) · Chemical Reviews · doi:10.1021/cr040002s · Cited by 2,257
Polymerization of Lactide with Zinc and Magnesium β-Diiminate Complexes: Stereocontrol and Mechanism
Chamberlain, B. M., Cheng, M., Moore, D. R., Ovitt, T. M., Lobkovsky, E. B., & Coates, G. W. (2001) · Journal of the American Chemical Society · doi:10.1021/ja003851f · Cited by 1,207
Crystallization and Melting Behavior of Polylactides
Sarasua, J.-R., Prud'homme, R. E., Wisniewski, M., Le Borgne, A., & Spassky, N. (1998) · Macromolecules · doi:10.1021/ma971545p · Cited by 525
Self-citationOvitt, T. M., & Coates, G. W. (1999) · Journal of the American Chemical Society · doi:10.1021/ja990088k · Cited by 502
Lewis acid catalyzed polymerization of L-lactide. Kinetics and mechanism of the bulk polymerization
Nijenhuis, A. J., Grijpma, D. W., & Pennings, A. J. (1992) · Macromolecules · doi:10.1021/ma00050a006 · Cited by 407
Tsuji, H., Hyon, S. H., & Ikada, Y. (1991) · Macromolecules · doi:10.1021/ma00020a026 · Cited by 334
Synthesis of polylactides with different molecular weights
Hyon, S.-H., Jamshidi, K., & Ikada, Y. (1997) · Biomaterials · doi:10.1016/s0142-9612(97)00076-8 · Cited by 237
Multifunctional initiation of lactide polymerization by stannous octoate/pentaerythritol
Kim, S. H., Han, Y., Kim, Y. H., & Hong, S. I. (1992) · Die Makromolekulare Chemie · doi:10.1002/macp.1992.021930706 · Cited by 196
Stereo block copolymers of L‐ and D‐lactides
Yui, N., Dijkstra, P. J., & Feijen, J. (1990) · Die Makromolekulare Chemie · doi:10.1002/macp.1990.021910303 · Cited by 151
Cited by
Pillai, C. K. S., & Sharma, C. P. (2010) · Journal of Biomaterials Applications · doi:10.1177/0885328210384890 · Cited by 353
Why Is Crystalline Poly(lactic acid) Brittle at Room Temperature?
Razavi, M., & Wang, S.-Q. (2019) · Macromolecules · doi:10.1021/acs.macromol.9b00595 · Cited by 212
Enzymatic synthesis of poly-l-lactide and poly-l-lactide-co-glycolide in an ionic liquid
Chanfreau, S., Mena, M., Porras-Domínguez, J. R., Ramírez-Gilly, M., Gimeno, M., Roquero, P., Tecante, A., & Bárzana, E. (2010) · Bioprocess and Biosystems Engineering · doi:10.1007/s00449-009-0388-8 · Cited by 72
“whereas pure PLLA shows only one signal, which corresponds to an isotactic polymer [17].”
BackgroundInfluentialTien, N.-D., & Prud'homme, R. E. (2017) · Polymer · doi:10.1016/j.polymer.2017.03.058 · Cited by 6
Self-citation
Metadata
- Authors
- Jalabert, M., Fraschini, C., & Prud'homme, R. E.
- Venue
- Journal of Polymer Science Part A: Polymer Chemistry
- Publisher
- Wiley
- Published
- 2007-04-04
- Volume
- 45
- Issue
- 10
- Pages
- 1944-1955
- ISSN
- 0887-624X (ISSN-L)
- 1099-0518
- OpenAlex
- W2065941460
- Cited by
- 81
- References
- 9
- FWCI
- 2.25
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Synthesis and characterization of poly(L‐lactide)s and poly(D‐lactide)s of controlled molecular weight. https://app.cochat.ai/papers/10.1002/pola.21960
- The paper
- Jalabert, M., Fraschini, C., & Prud'homme, R. E. (2007). Synthesis and characterization of poly(L‐lactide)s and poly(D‐lactide)s of controlled molecular weight. Journal of Polymer Science Part A: Polymer Chemistry. https://doi.org/10.1002/pola.21960
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.