The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Controlling electrospun nanofiber morphology and mechanical properties using humidity
Abstract
Electrospinning is a fiber spinning technique used to produce nanoscale polymeric fibers with superior interconnectivity and specific surface area. The fiber diameter, surface morphology, and mechanical strength are important properties of electrospun fibers that can be tuned for diverse applications. In this study, the authors investigate how the humidity during electrospinning influences these specific properties of the fiber mat. Using two previously uninvestigated polymers, poly(acrylonitrile) (PAN) and polysulfone (PSU) dissolved in N,N‐Dimethylformamide (DMF), experimental results show that increasing humidity during spinning causes an increase in fiber diameter and a decrease in mechanical strength. Moreover, surface features such as roughness or pores become evident when electrospinning in an atmosphere with high relative humidity (RH). However, PAN and PSU fibers are affected differently. PAN has a narrower distribution of fiber diameter regardless of the RH, whereas PSU has a wider and more bimodal distribution under high RH. In addition, PSU fibers spun at high humidity exhibit surface pores and higher specific surface area whereas PAN fibers exhibit an increased surface roughness but no visible pores. These fiber morphologies are caused by a complex interaction between the nonsolvent (water), the hygroscopic solvent (DMF), and the polymer. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electrospinning for tissue engineering scaffolds
Lannutti, J., Reneker, D., Ma, T., Tomasko, D., & Farson, D. (2007) · Materials Science and Engineering: C · doi:10.1016/j.msec.2006.05.019 · Cited by 693
Cited by
Functional materials by electrospinning of polymers
Agarwal, S., Greiner, A., & Wendorff, J. H. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.02.001 · Cited by 925
Thermo-responsive polymers and their application as smart biomaterials
Kim, Y.-J., & Matsunaga, Y. T. (2017) · Journal of Materials Chemistry B · doi:10.1039/c7tb00157f · Cited by 568
A review on electrospun polymeric nanofibers: Production parameters and potential applications
Ibrahim, H. M., & Klingner, A. (2020) · Polymer Testing · doi:10.1016/j.polymertesting.2020.106647 · Cited by 402
Huang, L., Arena, J. T., Manickam, S. S., Jiang, X., Willis, B. G., & McCutcheon, J. R. (2014) · Journal of Membrane Science · doi:10.1016/j.memsci.2014.01.045 · Cited by 280
Self-citationPorous electrospun polycaprolactone (PCL) fibres by phase separation
Katsogiannis, K. A. G., Vladisavljević, G. T., & Georgiadou, S. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2015.01.028 · Cited by 266
Metadata
- Authors
- Huang, L., Bui, N., Manickam, S. S., & McCutcheon, J. R.
- Venue
- Journal of Polymer Science Part B: Polymer Physics
- Publisher
- Wiley
- Published
- 2011-10-17
- Volume
- 49
- Issue
- 24
- Pages
- 1734-1744
- ISSN
- 0887-6266 (ISSN-L)
- 1099-0488
- OpenAlex
- W2055072486
- Cited by
- 192
- References
- 1
- FWCI
- 2.35
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.